Package: dh-systemd Source: init-system-helpers Version: 1.18.0 Architecture: all Maintainer: pkg-systemd-maintainers Installed-Size: 49 Depends: perl, debhelper Filename: all/dh-systemd_1.18.0_all.deb Size: 13764 MD5sum: 0b83c784cb3631326c80803b94b21317 SHA1: d51cd867a3ac97a89a4362ef430a9475eb96b20b SHA256: 6ca5329dfcd5bf90b34f35aa5a9bcd4f00121118e5fe70a2fc1faabbcb8c51e0 Section: admin Priority: extra Multi-Arch: foreign Description: debhelper add-on to handle systemd unit files dh-systemd provides a debhelper sequence addon named 'systemd' and the dh_systemd_enable/dh_systemd_start commands. . The dh_systemd_enable command adds the appropriate code to the postinst, prerm and postrm maint scripts to properly enable/disable systemd service files. The dh_systemd_start command deals with start/stop/restart on upgrades for systemd-only service files. Package: enigma Version: 1.20-dfsg.1-3 Architecture: i386 Maintainer: Erich Schubert Installed-Size: 3536 Depends: libc6 (>= 2.15), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:3.0), libpng16-16 (>= 1.6.2-1), libsdl-image1.2 (>= 1.2.10), libsdl-mixer1.2, libsdl-ttf2.0-0, libsdl1.2debian (>= 1.2.11), libstdc++6 (>= 5.2), libxerces-c3.1, libzipios++0v5, enigma-data (= 1.20-dfsg.1-3) Recommends: enigma-doc Conflicts: enigma-data (<< 1.10~~pre-alpha+r2210-1.1) Replaces: enigma-data (<< 1.10~~pre-alpha+r2210-1.1) Filename: i386/enigma_1.20-dfsg.1-3_i386.deb Size: 1140398 MD5sum: ca730bd7273348049e719a2d6d43c2c3 SHA1: 0d814c193bc04fdac1a9052ce8285ffddd6eeef5 SHA256: 6c7431c8e269ddb33f76f68683deb660adab4c659d3bb901ffdd0dea94361485 Section: games Priority: extra Homepage: http://enigma.nongnu.org/ Description: Game where you control a marble with the mouse Enigma is a puzzle game similar to Oxyd on the Atari ST or Rock'n'Roll on the Amiga and good old Marble Madness. It also has Sokoban levels, and some interesting twists on the original sokoban concept. . In Enigma, your objective is to locate and uncover matching pairs of Oxyd stones. Simple as it sounds, this task is made more difficult by the fact that Oxyd stones tend to be hidden, inaccessible or protected by unexpected traps. Overcoming these obstacles often requires a lot of dexterity and wit (and can be quite addictive). . This package contains the game engine. Package: enigma Version: 1.20-dfsg.1-3 Architecture: amd64 Maintainer: Erich Schubert Installed-Size: 4067 Depends: libc6 (>= 2.15), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:3.0), libpng16-16 (>= 1.6.2-1), libsdl-image1.2 (>= 1.2.10), libsdl-mixer1.2, libsdl-ttf2.0-0, libsdl1.2debian (>= 1.2.11), libstdc++6 (>= 5.2), libxerces-c3.1, libzipios++0v5, enigma-data (= 1.20-dfsg.1-3) Recommends: enigma-doc Conflicts: enigma-data (<< 1.10~~pre-alpha+r2210-1.1) Replaces: enigma-data (<< 1.10~~pre-alpha+r2210-1.1) Filename: amd64/enigma_1.20-dfsg.1-3_amd64.deb Size: 910568 MD5sum: 0f1ffe864ae826f99edaadbb6cb80d38 SHA1: d1c94fbce13424ac041fdb9b8d7641131fda17a7 SHA256: d9cc40c63563ba4db0c2bfb51664bf3fc88ff7da699e7f6cba3da390ccaedb15 Section: games Priority: extra Homepage: http://enigma.nongnu.org/ Description: Game where you control a marble with the mouse Enigma is a puzzle game similar to Oxyd on the Atari ST or Rock'n'Roll on the Amiga and good old Marble Madness. It also has Sokoban levels, and some interesting twists on the original sokoban concept. . In Enigma, your objective is to locate and uncover matching pairs of Oxyd stones. Simple as it sounds, this task is made more difficult by the fact that Oxyd stones tend to be hidden, inaccessible or protected by unexpected traps. Overcoming these obstacles often requires a lot of dexterity and wit (and can be quite addictive). . This package contains the game engine. Package: enigma-data Source: enigma Version: 1.20-dfsg.1-3 Architecture: all Maintainer: Erich Schubert Installed-Size: 39567 Depends: ttf-dejavu-core, ttf-dejavu-extra Conflicts: enigma-level-previews Filename: all/enigma-data_1.20-dfsg.1-3_all.deb Size: 30302218 MD5sum: ec02b99b4ed483e43a3f13f4c411f606 SHA1: 3b6206712feb30492cbbcd40e3f2e322849b3764 SHA256: ad5620c01adaf2c1e9bde07efe3a816037e8bd4267b053639a2f7635da43a135 Section: games Priority: extra Homepage: http://enigma.nongnu.org/ Description: Data files for the game enigma Enigma is a puzzle game similar to Oxyd on the Atari ST or Rock'n'Roll on the Amiga and good old Marble Madness. It also has Sokoban levels, and some interesting twists on the original sokoban concept. . In Enigma, your objective is to locate and uncover matching pairs of Oxyd stones. Simple as it sounds, this task is made more difficult by the fact that Oxyd stones tend to be hidden, inaccessible or protected by unexpected traps. Overcoming these obstacles often requires a lot of dexterity and wit (and can be quite addictive). . This package contains the data files (levels, graphics, sounds). Package: enigma-dbgsym Source: enigma Version: 1.20-dfsg.1-3 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Erich Schubert Installed-Size: 553 Depends: enigma (= 1.20-dfsg.1-3) Filename: i386/enigma-dbgsym_1.20-dfsg.1-3_i386.deb Size: 119578 MD5sum: 1eb8f93c95e517985ced58787af96c33 SHA1: e39408a43b634cd15f145b44bff19ad4969e97eb SHA256: d942b7a5c66332b052b157a62c7bfc1296cb30d5869ddb01ec3496f1e19725c5 Section: debug Priority: extra Homepage: http://enigma.nongnu.org/ Description: Debug symbols for enigma Build-Ids: 3cab5d7f956e4f3730010d07c2c6e6581b183e44 Package: enigma-dbgsym Source: enigma Version: 1.20-dfsg.1-3 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Erich Schubert Installed-Size: 2131 Depends: enigma (= 1.20-dfsg.1-3) Filename: amd64/enigma-dbgsym_1.20-dfsg.1-3_amd64.deb Size: 273704 MD5sum: 13976949998febbe7189000718de4d4c SHA1: 270aeb3f9b0a991ecc54b7e97d1133e1daf34961 SHA256: 091f1fdfbdcb4cadd356c0119b58eaedb6457f6b7144de96d9a4eee3e3e3e7a6 Section: debug Priority: extra Homepage: http://enigma.nongnu.org/ Description: Debug symbols for enigma Build-Ids: 8d8b01ed09ce5fc55af55a3aecb138b8a9156f9c Package: enigma-doc Source: enigma Version: 1.20-dfsg.1-3 Architecture: all Maintainer: Erich Schubert Installed-Size: 7022 Recommends: enigma Filename: all/enigma-doc_1.20-dfsg.1-3_all.deb Size: 4154510 MD5sum: f763462fdfa0c992230b7d029274b6d5 SHA1: ecc43326aa67324d12657f7e4e297fa129bde47c SHA256: e279c0c954e4f919cb4e8edec7cddfe37e56686ab56548cfa9f37c65fcfebc63 Section: doc Priority: extra Homepage: http://enigma.nongnu.org/ Description: Documentation for the game enigma Enigma is a puzzle game similar to Oxyd on the Atari ST or Rock'n'Roll on the Amiga and good old Marble Madness. It also has Sokoban levels, and some interesting twists on the original sokoban concept. . In Enigma, your objective is to locate and uncover matching pairs of Oxyd stones. Simple as it sounds, this task is made more difficult by the fact that Oxyd stones tend to be hidden, inaccessible or protected by unexpected traps. Overcoming these obstacles often requires a lot of dexterity and wit (and can be quite addictive). . This package contains the manual and level creating guide Package: hex-a-hop Version: 1.1.0+git20140926-1.1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 225 Depends: hex-a-hop-data (>= 1.1.0+git20140926-1.1), libc6 (>= 2.7), libgcc1 (>= 1:3.0), libsdl-image1.2 (>= 1.2.10), libsdl-mixer1.2, libsdl-pango1, libsdl1.2debian (>= 1.2.11), libstdc++6 (>= 5.2) Filename: i386/hex-a-hop_1.1.0+git20140926-1.1_i386.deb Size: 84522 MD5sum: a25f34a04cecaefd6c953c3c5fb14c8a SHA1: e672b87fc381992ea05184fdae96bebb6097168d SHA256: 99f7cee8f9de885d911b92624615807c938cc9fde09d644b2ec4681ece5e09a7 Section: games Priority: optional Homepage: http://hexahop.sourceforge.net/ Description: puzzle game based on hexagonal tiles Hex-a-hop is a great puzzle game in which a girl has to break all the green tiles in an hexagonal map and step onto a safe tile without getting trapped. As you progress through the game, more types of tiles are introduced which make things more difficult and interesting as you progress through the many levels. You can use the infinite undo feature to retrace your steps if you make a mistake. You can take as long as you like to complete each level. Package: hex-a-hop Version: 1.1.0+git20140926-1.1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 228 Depends: hex-a-hop-data (>= 1.1.0+git20140926-1.1), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libsdl-image1.2 (>= 1.2.10), libsdl-mixer1.2, libsdl-pango1, libsdl1.2debian (>= 1.2.11), libstdc++6 (>= 5.2) Filename: amd64/hex-a-hop_1.1.0+git20140926-1.1_amd64.deb Size: 81194 MD5sum: cd541711e27be72744e806c9182503e8 SHA1: 9fef71dde5f207304e439a10bfabebb7acba380a SHA256: 40834aacef0b2ed1e759125d488bc6c0bc5b34183ccc4c33994791f89ee47817 Section: games Priority: optional Homepage: http://hexahop.sourceforge.net/ Description: puzzle game based on hexagonal tiles Hex-a-hop is a great puzzle game in which a girl has to break all the green tiles in an hexagonal map and step onto a safe tile without getting trapped. As you progress through the game, more types of tiles are introduced which make things more difficult and interesting as you progress through the many levels. You can use the infinite undo feature to retrace your steps if you make a mistake. You can take as long as you like to complete each level. Package: hex-a-hop-data Source: hex-a-hop Version: 1.1.0+git20140926-1.1 Architecture: all Maintainer: Debian Games Team Installed-Size: 9671 Breaks: hex-a-hop (<< 1.1.0+git20140926-1~) Replaces: hex-a-hop (<< 1.1.0+git20140926-1~) Filename: all/hex-a-hop-data_1.1.0+git20140926-1.1_all.deb Size: 9183984 MD5sum: 6a369ef620f2bfde32b0c82032fe6dfe SHA1: d526fcad2eb25427d3b80930b28f79ae63f76b12 SHA256: e6bb8a79310bf1137da9e1a624c25794ae30be958d38cc663ae793d09480f8ce Section: games Priority: optional Multi-Arch: foreign Homepage: http://hexahop.sourceforge.net/ Description: graphics, audio, levels and translations for Hex-a-hop This package contains graphics, audio, levels, docs and l10n for Hex-a-hop. . Graphics included are the background, icons, map layers, tile images, title graphics and movement animations of the heroine. Audio included are the music and sound effects. Package: hex-a-hop-dbgsym Source: hex-a-hop Version: 1.1.0+git20140926-1.1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian Games Team Installed-Size: 264 Depends: hex-a-hop (= 1.1.0+git20140926-1.1) Filename: i386/hex-a-hop-dbgsym_1.1.0+git20140926-1.1_i386.deb Size: 241050 MD5sum: 88ec487786fc548570a3b8bb648f702a SHA1: 9f0dc53229202c9e2bd2c8deb0e9cc23b5dbf2a5 SHA256: 504cd1427858f4c0ea5201aca56c0ad3ecbbb6ee2c9609178fa7a03621ffa8f2 Section: debug Priority: extra Homepage: http://hexahop.sourceforge.net/ Description: Debug symbols for hex-a-hop Build-Ids: 3717d29100f87ff1529497a372d9ef0c2155c240 Package: hex-a-hop-dbgsym Source: hex-a-hop Version: 1.1.0+git20140926-1.1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 285 Depends: hex-a-hop (= 1.1.0+git20140926-1.1) Filename: amd64/hex-a-hop-dbgsym_1.1.0+git20140926-1.1_amd64.deb Size: 257058 MD5sum: 57bfad1c5b35b5ff96e39f482fc10cbe SHA1: e11e36acf6b89212ede523019653e9219b52de78 SHA256: d27b5d79d0148a6939e97b0aebade831ad9ab5e129600c646bcb4bdfda23ceea Section: debug Priority: extra Homepage: http://hexahop.sourceforge.net/ Description: Debug symbols for hex-a-hop Build-Ids: 11ff9e0c427e203a13a8cf2e1433d3516956f4c7 Package: init-system-helpers Version: 1.18.0 Architecture: all Maintainer: pkg-systemd-maintainers Installed-Size: 49 Depends: perl:any Breaks: systemd (<< 44-12) Filename: all/init-system-helpers_1.18.0_all.deb Size: 13332 MD5sum: 052c85a17eb82cf9aaa38ad8667622bd SHA1: a049042fcf71646f5b02fbb2b55f531c181448cd SHA256: 767ea6414cd7835e0252ed3385ff608b70db5584ac707af4d60f4781de17d242 Section: admin Priority: extra Multi-Arch: foreign Description: helper tools for all init systems This package contains helper tools that are necessary for switching between the various init systems that Debian contains (e.g. sysvinit, upstart, systemd). An example is deb-systemd-helper, a script that enables systemd unit files without depending on a running systemd. . While this package is maintained by pkg-systemd-maintainers, it is NOT specific to systemd at all. Maintainers of other init systems are welcome to include their helpers in this package. Package: libirrlicht-dev Source: irrlicht Version: 1.8.4.0-1.1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 13727 Depends: libirrlicht1.8 (= 1.8.4.0-1.1) Suggests: libirrlicht-doc Filename: i386/libirrlicht-dev_1.8.4.0-1.1_i386.deb Size: 2143366 MD5sum: d90f0b69b8911bdf238236a75e6a9a4c SHA1: 18ee84f2f014f7a96f68594e9957498c90241e9a SHA256: 777551a9b423d338004a5c6be60a8cecb1468bb3e2811446cb0751926758ccf9 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://irrlicht.sf.net Description: High performance realtime 3D engine development library The Irrlicht Engine is an open source completely cross-platform 3D engine. It has support for OpenGL and its own software renderer, and has all of the state-of-the-art features which can be found in commercial 3d engines. . This package contains the development library. Package: libirrlicht-dev Source: irrlicht Version: 1.8.4.0-1.1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 16482 Depends: libirrlicht1.8 (= 1.8.4.0-1.1) Suggests: libirrlicht-doc Filename: amd64/libirrlicht-dev_1.8.4.0-1.1_amd64.deb Size: 2223888 MD5sum: 6add662d71e9fd461b0a9bde05340285 SHA1: 4040bc815449b31b3d2eb9eba01825ca95f7e389 SHA256: bb50229e9159f513cb166e1ad9550e35c6ed10eec8dd617f0ad06966eb072a99 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://irrlicht.sf.net Description: High performance realtime 3D engine development library The Irrlicht Engine is an open source completely cross-platform 3D engine. It has support for OpenGL and its own software renderer, and has all of the state-of-the-art features which can be found in commercial 3d engines. . This package contains the development library. Package: libirrlicht-doc Source: irrlicht Version: 1.8.4.0-1.1 Architecture: all Maintainer: Debian Games Team Installed-Size: 35463 Filename: all/libirrlicht-doc_1.8.4.0-1.1_all.deb Size: 2388602 MD5sum: b6980c0a0553d6015f53404566c61687 SHA1: 2ba3a2f28e0c94bea8feae610097add95626df12 SHA256: 5a4f76aa4fdf09f746c16fed3f1081cb1adc827bbb7bae97cb536e8c29f94597 Section: doc Priority: optional Multi-Arch: foreign Homepage: http://irrlicht.sf.net Description: High performance realtime 3D engine (API documentation) The Irrlicht Engine is an open source completely cross-platform 3D engine. It has support for OpenGL and its own software renderer, and has all of the state-of-the-art features which can be found in commercial 3d engines. . This package contains the API documentation and examples. Package: libirrlicht1.8 Source: irrlicht Version: 1.8.4.0-1.1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 5450 Depends: libbz2-1.0, libc6 (>= 2.3), libgcc1 (>= 1:3.0), libgl1-mesa-glx | libgl1, libjpeg62-turbo, libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 5), libx11-6, libxxf86vm1, zlib1g (>= 1:1.1.4) Filename: i386/libirrlicht1.8_1.8.4.0-1.1_i386.deb Size: 1548822 MD5sum: bf1f52385f602cf9ccae2ab4656d2755 SHA1: 7fb80b5ac0d6c94af2a294aca76228637de94214 SHA256: 5f33b0a0a67dd5df550d508a9bf5776fa82e0f3bee091ff73c23c7ed00bc0b1e Section: libs Priority: optional Multi-Arch: same Homepage: http://irrlicht.sf.net Description: High performance realtime 3D engine The Irrlicht Engine is an open source completely cross-platform 3D engine. It has support for OpenGL and its own software renderer, and has all of the state-of-the-art features which can be found in commercial 3d engines. Package: libirrlicht1.8 Source: irrlicht Version: 1.8.4.0-1.1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 6182 Depends: libbz2-1.0, libc6 (>= 2.14), libgcc1 (>= 1:3.0), libgl1-mesa-glx | libgl1, libjpeg62-turbo, libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 5), libx11-6, libxxf86vm1, zlib1g (>= 1:1.1.4) Filename: amd64/libirrlicht1.8_1.8.4.0-1.1_amd64.deb Size: 1639526 MD5sum: 79fcd8cd92eda088fce4949113e1a5af SHA1: e6001b39dd5dea4f01e2f8c673158216e304ef19 SHA256: 6f345fac7e921054cf981285d156ec7feb375514cf2c778115106a71f495d336 Section: libs Priority: optional Multi-Arch: same Homepage: http://irrlicht.sf.net Description: High performance realtime 3D engine The Irrlicht Engine is an open source completely cross-platform 3D engine. It has support for OpenGL and its own software renderer, and has all of the state-of-the-art features which can be found in commercial 3d engines. Package: libirrlicht1.8-dbg Source: irrlicht Version: 1.8.4.0-1.1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 902 Depends: libirrlicht1.8 (= 1.8.4.0-1.1) Filename: i386/libirrlicht1.8-dbg_1.8.4.0-1.1_i386.deb Size: 227506 MD5sum: 29c86732ce1216ca1f37ea47d7700f1b SHA1: 0c606fb3655d025df9c7646156f4d4937692d816 SHA256: 6d14f6e47d5dae1f07faeb498e5f1c7f2cacafe489c4fdc265b964ffb9059015 Section: debug Priority: optional Multi-Arch: same Homepage: http://irrlicht.sf.net Description: debugging symbols for irrlicht This package contains the debugging symbols associated with irrlicht. They will automatically be used by gdb for debugging irrlicht-related issues. Package: libirrlicht1.8-dbg Source: irrlicht Version: 1.8.4.0-1.1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 979 Depends: libirrlicht1.8 (= 1.8.4.0-1.1) Filename: amd64/libirrlicht1.8-dbg_1.8.4.0-1.1_amd64.deb Size: 231394 MD5sum: 0f17b8fa80d6569d570d6713f22d467b SHA1: d86cbe57a75345f5354651ec49823436158cde9b SHA256: b9420fb8d7cf8f0505fea202d57687e4a7f284e6f1fbe96548f1fc78ae8ab96c Section: debug Priority: optional Multi-Arch: same Homepage: http://irrlicht.sf.net Description: debugging symbols for irrlicht This package contains the debugging symbols associated with irrlicht. They will automatically be used by gdb for debugging irrlicht-related issues. Package: libjpeg-dev Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: all Maintainer: Ondřej Surý Installed-Size: 69 Depends: libjpeg62-turbo-dev (>= 1:1.5.2-2.0) Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev Filename: all/libjpeg-dev_1.5.2-2.0_all.deb Size: 57702 MD5sum: 3d5fd025b8405069cc2fe493d0833ffa SHA1: 181e354b59c93a4459e40cc88d5383bb80fe8e5a SHA256: 1a6d2375dd3753707a4867c626eb167816505f61ff895799c00091bd7d835f78 Section: libdevel Priority: optional Homepage: http://www.libjpeg-turbo.org/ Description: Development files for the JPEG library [dummy package] This package depends on default Debian implementation of libjpeg.so.62 JPEG library. Package: libjpeg-turbo-progs Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 286 Depends: libc6 (>= 2.11), libjpeg62-turbo, libturbojpeg0 Conflicts: libjpeg-progs Replaces: libjpeg-progs Provides: libjpeg-progs Filename: i386/libjpeg-turbo-progs_1.5.2-2.0_i386.deb Size: 120192 MD5sum: b4f2b32252935fdd1a1478ad187b43b4 SHA1: bf88ffba30b0454ebe6867fadc63e250e9c9c6a4 SHA256: de1c873ea5747b4552377d044d787852d00f5083a16cf6e793449bff932647ec Section: graphics Priority: optional Homepage: http://www.libjpeg-turbo.org/ Description: Programs for manipulating JPEG files This package contains programs for manipulating JPEG files from the libjpeg-turbo JPEG library: * cjpeg/djpeg: convert to/from the JPEG file format * rdjpgcom/wrjpgcom: read/write comments in JPEG files * jpegtran: lossless transformations of JPEG files * jpegexiforient/exifautotran: manipulate EXIF orientation tag * tjbench: a simple JPEG benchmarking tool Package: libjpeg-turbo-progs Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 310 Depends: libc6 (>= 2.14), libjpeg62-turbo, libturbojpeg0 Conflicts: libjpeg-progs Replaces: libjpeg-progs Provides: libjpeg-progs Filename: amd64/libjpeg-turbo-progs_1.5.2-2.0_amd64.deb Size: 127718 MD5sum: 8751f33cf53f074074b7cc71001436fb SHA1: 9761ae949e97ef35ca4444f8fcc262d9a9389716 SHA256: 1ebd72d27f32ff323cddd94668b187c2fc27439cee1f1fd69f84002167a507b2 Section: graphics Priority: optional Homepage: http://www.libjpeg-turbo.org/ Description: Programs for manipulating JPEG files This package contains programs for manipulating JPEG files from the libjpeg-turbo JPEG library: * cjpeg/djpeg: convert to/from the JPEG file format * rdjpgcom/wrjpgcom: read/write comments in JPEG files * jpegtran: lossless transformations of JPEG files * jpegexiforient/exifautotran: manipulate EXIF orientation tag * tjbench: a simple JPEG benchmarking tool Package: libjpeg-turbo-progs-dbgsym Source: libjpeg-turbo Version: 1:1.5.2-2.0 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 231 Depends: libjpeg-turbo-progs (= 1:1.5.2-2.0) Breaks: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Replaces: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Filename: i386/libjpeg-turbo-progs-dbgsym_1.5.2-2.0_i386.deb Size: 177706 MD5sum: 082afec75fa93fb8eafca32f86b60e74 SHA1: 0075c252ffb168af84bcbe77877bd855d4ed794c SHA256: d58ab7c8440e00a745a53e3a613ab2c645168344077bffb768247a8416306676 Section: debug Priority: extra Homepage: http://www.libjpeg-turbo.org/ Description: Debug symbols for libjpeg-turbo-progs Build-Ids: 132a9197197f07ad4c5db283f174668079e9d26e 16546f163aecad4b04a2074e52bec988b265c920 26d236fc318458ed8670efa05669a311a23ac011 64cd3f6b77597f93f4d958809458a30e46c086f1 790549b7059d88b46d58b409c6fb13751fe84590 8d4fd5232c83101f0a4749367ac20e875750b585 8eccbc286b37cdb17e9b73a0d31c5992fb4876c6 Package: libjpeg-turbo-progs-dbgsym Source: libjpeg-turbo Version: 1:1.5.2-2.0 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 270 Depends: libjpeg-turbo-progs (= 1:1.5.2-2.0) Breaks: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Replaces: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Filename: amd64/libjpeg-turbo-progs-dbgsym_1.5.2-2.0_amd64.deb Size: 201112 MD5sum: f01cb43eb6d6789cdcddbeeeb542564e SHA1: 4b78052dfa5735432a0da3e70c38925dca37df8e SHA256: 0cf78bbb10b4373e4a29c38bc5e9448398a284d5082b58bb35e3f92d84beea15 Section: debug Priority: extra Homepage: http://www.libjpeg-turbo.org/ Description: Debug symbols for libjpeg-turbo-progs Build-Ids: 463628efbdca21c04edfef8d5b41c7e976d8799c 4adc9f97ff6889fe21b7e28de4a0e1f67e304607 614fd8ff9bc29685a509cc97a6c56aa6592c4d5e 6b1f74a8e42429e3da02b79b0c789ac4fff5d736 71b9cdb301af0e6277ae46d74d95fd5bc8457f21 acac6276a76a7627f65c0041aef0d66e037edffa d71ed64c4215af4164dc044c7bff17de347f65d3 Package: libjpeg62-turbo Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 542 Depends: libc6 (>= 2.7) Conflicts: libjpeg62 Replaces: libjpeg62 Provides: libjpeg62 (= 1:1.5.2-2.0) Filename: i386/libjpeg62-turbo_1.5.2-2.0_i386.deb Size: 151824 MD5sum: af28b89feb57c560fbeab1c19f6003e5 SHA1: 61b233e3f8f5e4c09110f84aab86555bedc5f846 SHA256: 98df07c1880fbe3088432252c48a212873ce2dc4247abfbfa5a412aa67ea2c8d Section: libs Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: libjpeg-turbo JPEG runtime library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the shared runtime library. Package: libjpeg62-turbo Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 578 Depends: libc6 (>= 2.14) Conflicts: libjpeg62 Replaces: libjpeg62 Provides: libjpeg62 (= 1:1.5.2-2.0) Filename: amd64/libjpeg62-turbo_1.5.2-2.0_amd64.deb Size: 163266 MD5sum: d8af61cbaf1221639f851c46c2d2f638 SHA1: edd23f5b8bcb67cd64751e584f46b21e68efec69 SHA256: 6340c71c4a12eeef1692c115fbfbb4fdfd1597162b557be2963466684a907793 Section: libs Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: libjpeg-turbo JPEG runtime library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the shared runtime library. Package: libjpeg62-turbo-dbgsym Source: libjpeg-turbo Version: 1:1.5.2-2.0 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 412 Depends: libjpeg62-turbo (= 1:1.5.2-2.0) Breaks: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Replaces: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Filename: i386/libjpeg62-turbo-dbgsym_1.5.2-2.0_i386.deb Size: 333858 MD5sum: 16a8505baa3c0db9376cd266e6ff7311 SHA1: 570f473cee9e9af854628923dfb26252ae79f5f2 SHA256: 9a4784bb9008ad97fe5ef226d604d5bfb82368f03b54b6ee292c33ac2c64ecf8 Section: debug Priority: extra Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Debug symbols for libjpeg62-turbo Build-Ids: f9b6d01997c87e96fea01fe7147f38b1bab04bd3 Package: libjpeg62-turbo-dbgsym Source: libjpeg-turbo Version: 1:1.5.2-2.0 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 464 Depends: libjpeg62-turbo (= 1:1.5.2-2.0) Breaks: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Replaces: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Filename: amd64/libjpeg62-turbo-dbgsym_1.5.2-2.0_amd64.deb Size: 396668 MD5sum: 9613cf2ef11d11ef41ee740ecd698454 SHA1: 73c96cce33dad1b2d85cb8457e95a277889ab763 SHA256: f8fee4a24ddfd04be8f4918af7c88639f76d11c0e58ca9185b51525100fc8dcb Section: debug Priority: extra Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Debug symbols for libjpeg62-turbo Build-Ids: 3983a21f8e1daaf4cbc031a9a9d985216b5e8109 Package: libjpeg62-turbo-dev Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 876 Depends: libc-dev, libjpeg62-turbo (= 1:1.5.2-2.0) Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev Replaces: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev Provides: libjpeg-dev Filename: i386/libjpeg62-turbo-dev_1.5.2-2.0_i386.deb Size: 238744 MD5sum: 4768b76af07991ccc66ed69a0042ac6b SHA1: d5487ccb56e20c51288d96c6c155db8367ce8fed SHA256: 971850bb204ceee24eae69af61f5370f1a6b212c5931319cb5ae19d399371db1 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Development files for the libjpeg-turbo JPEG library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the static library, headers and documentation. Package: libjpeg62-turbo-dev Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 902 Depends: libc-dev, libjpeg62-turbo (= 1:1.5.2-2.0) Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev Replaces: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev Provides: libjpeg-dev Filename: amd64/libjpeg62-turbo-dev_1.5.2-2.0_amd64.deb Size: 240984 MD5sum: 6f9b388d192d1d8906a7847c62823597 SHA1: 3c022b598c0fbd69e01dc3daf682ab938a0d10fc SHA256: 90952ad6b6f400cfc84493ee5cb06533f24218d309d40d88e273a85b2ec928b5 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Development files for the libjpeg-turbo JPEG library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the static library, headers and documentation. Package: libluajit-5.1-2 Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Architecture: i386 Maintainer: Enrico Tassi Installed-Size: 521 Depends: libluajit-5.1-common (= 2.1.0~beta3+git20210112+dfsg-0), libc6 (>= 2.2), libgcc1 (>= 1:3.3) Filename: i386/libluajit-5.1-2_2.1.0~beta3+git20210112+dfsg-0_i386.deb Size: 240544 MD5sum: 77d18f36e861b9a40941b6e6ae4f038b SHA1: 39a15015b34d052f3ec396f5f62d00f4f1209779 SHA256: ead5e0b555f4fa5ba8673d9773331efe7b9c86e4caafc49b02f06a59ed2e5455 Section: interpreters Priority: optional Multi-Arch: same Homepage: http://luajit.org Description: Just in time compiler for Lua - library version LuaJIT implements the full set of language features defined by Lua 5.1. The virtual machine (VM) is API- and ABI-compatible to the standard Lua interpreter and can be deployed as a drop-in replacement. . This package contains an embeddable version of LuaJIT that can be used as a replacement of the standard liblua-5.1 shared library. Package: libluajit-5.1-2 Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Architecture: amd64 Maintainer: Enrico Tassi Installed-Size: 529 Depends: libluajit-5.1-common (= 2.1.0~beta3+git20210112+dfsg-0), libc6 (>= 2.14), libgcc1 (>= 1:3.3) Filename: amd64/libluajit-5.1-2_2.1.0~beta3+git20210112+dfsg-0_amd64.deb Size: 233218 MD5sum: 0142dbcf714aed9a054e40095c192feb SHA1: 454c2002c6e381328303e47885627e1718e4c144 SHA256: c996f718a8232e730db51b3d3a667e38c5153606fe659395f11da871fe4735bf Section: interpreters Priority: optional Multi-Arch: same Homepage: http://luajit.org Description: Just in time compiler for Lua - library version LuaJIT implements the full set of language features defined by Lua 5.1. The virtual machine (VM) is API- and ABI-compatible to the standard Lua interpreter and can be deployed as a drop-in replacement. . This package contains an embeddable version of LuaJIT that can be used as a replacement of the standard liblua-5.1 shared library. Package: libluajit-5.1-2-dbgsym Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Enrico Tassi Installed-Size: 651 Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20210112+dfsg-0) Filename: i386/libluajit-5.1-2-dbgsym_2.1.0~beta3+git20210112+dfsg-0_i386.deb Size: 608854 MD5sum: a3c94b182e139cdfecf97a9eacb7cce4 SHA1: 0f86f04a3285f080fc586479721600d96878a4e2 SHA256: 758a83e115e428c53ecaf8bbdbc723780ec09c22c536e8d7f4ca872de0fc5a23 Section: debug Priority: extra Multi-Arch: same Homepage: http://luajit.org Description: Debug symbols for libluajit-5.1-2 Build-Ids: b9c11b6945cb84043d75b4d4b957489663db57f5 Package: libluajit-5.1-2-dbgsym Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Enrico Tassi Installed-Size: 675 Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20210112+dfsg-0) Filename: amd64/libluajit-5.1-2-dbgsym_2.1.0~beta3+git20210112+dfsg-0_amd64.deb Size: 629022 MD5sum: 6e3e658d3dfc5d7b8c50a15540c30130 SHA1: 6f4b085f9eb7877bb50d6807d4f417f89046207a SHA256: 74951302f8b5016b4081a25d0bca38ac5452b494a29d2dc8764195e794033cde Section: debug Priority: extra Multi-Arch: same Homepage: http://luajit.org Description: Debug symbols for libluajit-5.1-2 Build-Ids: cc5d70dbcac0db8e48277ccc5ded282b20f6d580 Package: libluajit-5.1-common Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Architecture: all Maintainer: Enrico Tassi Installed-Size: 216 Filename: all/libluajit-5.1-common_2.1.0~beta3+git20210112+dfsg-0_all.deb Size: 48416 MD5sum: 07b2ee76b4198f13062d20fdb7e174f3 SHA1: 42d6f55b34428685ad8d4848fe79fbe3f5257de9 SHA256: 3d65163647a4489114f70047c9ab83febe476e5e13348a79c76ab459f0e4854b Section: interpreters Priority: optional Multi-Arch: foreign Homepage: http://luajit.org Description: Just in time compiler for Lua - common files This package contains files needed by the LuaJIT interpreter/jitter as well by its embeddable (i.e. library) version. Package: libluajit-5.1-dev Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Architecture: i386 Maintainer: Enrico Tassi Installed-Size: 647 Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20210112+dfsg-0) Filename: i386/libluajit-5.1-dev_2.1.0~beta3+git20210112+dfsg-0_i386.deb Size: 259352 MD5sum: 3357be0ef14cd36354cc35bd0bb0c509 SHA1: a5255a4caf599725319c4c88340b514c0747970b SHA256: 04a3f832c31ebeb435c883455a9e04671254662f34e5347915d868c877af7a3e Section: libdevel Priority: optional Multi-Arch: same Homepage: http://luajit.org Description: Just in time compiler for Lua - development files This package contains header files and a statically linkable library for LuaJIT. Package: libluajit-5.1-dev Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Architecture: amd64 Maintainer: Enrico Tassi Installed-Size: 715 Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20210112+dfsg-0) Filename: amd64/libluajit-5.1-dev_2.1.0~beta3+git20210112+dfsg-0_amd64.deb Size: 251474 MD5sum: 3490ff4d1917e0eeafead5ba78d0509e SHA1: 6d7634e4c117056392cfeec1ce2b669dc7811adf SHA256: 110c4a25e94fba6119ba950a88b7dae8ca5b5689a665d5f204ad1b9ca0fc9f22 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://luajit.org Description: Just in time compiler for Lua - development files This package contains header files and a statically linkable library for LuaJIT. Package: libopenal-data Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: all Maintainer: Debian Games Team Installed-Size: 147 Breaks: libopenal1 (<< 1:1.14-5) Replaces: libopenal1 (<< 1:1.14-5) Filename: all/libopenal-data_1.17.2-5vnz1_all.deb Size: 106984 MD5sum: 8780b376a054d8661bce518d209c269f SHA1: 9af7f033d5ab642439a15ac96c71155990200740 SHA256: f9df1c18e99414a5a149d5bc32a53f0264a6a84a4adbc669e101fb33d4f8d801 Section: libs Priority: optional Multi-Arch: foreign Homepage: http://kcat.strangesoft.net/openal.html Description: Software implementation of the OpenAL audio API (data files) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This package installs data files used by the OpenAL Soft shared library. Package: libopenal-dev Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 153 Depends: libopenal1 (= 1:1.17.2-5vnz1) Filename: i386/libopenal-dev_1.17.2-5vnz1_i386.deb Size: 28048 MD5sum: ce9c9a147c1082829f775b63c52824e7 SHA1: 9d27d555f5db28fd88aed3e58150f84f70eabf55 SHA256: c10ddc4503d7b78e27b14bf655085a6107db02719e097491a4549e7bfd1b62b6 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://kcat.strangesoft.net/openal.html Description: Software implementation of the OpenAL audio API (development files) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This package contains the files necessary for development with OpenAL . Package: libopenal-dev Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 153 Depends: libopenal1 (= 1:1.17.2-5vnz1) Filename: amd64/libopenal-dev_1.17.2-5vnz1_amd64.deb Size: 28060 MD5sum: 019ac1ab5297867f4801519f5da16d68 SHA1: cf64ea2e3b73e77aa608e1663ddcf5ebb156080e SHA256: 506aa24a1d9aeed0002b72f9773e664eaa1ff0e98a3cacd33700c597dd017b79 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://kcat.strangesoft.net/openal.html Description: Software implementation of the OpenAL audio API (development files) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This package contains the files necessary for development with OpenAL . Package: libopenal1 Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 570 Depends: libopenal-data (= 1:1.17.2-5vnz1), libc6 (>= 2.16), libsndio6.1 (>= 1.1.0) Recommends: libasound2 (>= 1.0.16), libpulse0 (>= 0.99.1) Suggests: libportaudio2 (>= 19+svn20101113) Filename: i386/libopenal1_1.17.2-5vnz1_i386.deb Size: 219548 MD5sum: 271f390144e3f068e5714e67ab3990c8 SHA1: 968d4844d016939946095a9951887c81bb983131 SHA256: 148138d6bbe3af45faaba8392d2eec9b059d6abe1381db8f697986536ded664f Section: libs Priority: optional Multi-Arch: same Homepage: http://kcat.strangesoft.net/openal.html Description: Software implementation of the OpenAL audio API (shared library) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This library is meant as a compatible update/replacement to the OpenAL Sample Implementation (the SI). The SI has been unmaintained for quite a while, and would require a lot of work to clean up. This is a fork the old Windows version to attempt an accelerated ALSA version of an OpenAL implementation. . OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as opposed to the SI's 4-channel max (though it did have some provisions for 6 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft does not support the Vorbis and MP3 extensions, however those were considered deprecated even in the SI. It does, though, support some of the newer extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and floating-point formats, as well as ALC_EXT_EFX for environmental audio effects, and others. . This package installs the OpenAL Soft shared library. Package: libopenal1 Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 539 Depends: libopenal-data (= 1:1.17.2-5vnz1), libc6 (>= 2.16), libsndio6.1 (>= 1.1.0) Recommends: libasound2 (>= 1.0.16), libpulse0 (>= 0.99.1) Suggests: libportaudio2 (>= 19+svn20101113) Filename: amd64/libopenal1_1.17.2-5vnz1_amd64.deb Size: 211248 MD5sum: 76f78d5554282bcf00c1687639c96b48 SHA1: 73df41897d3e8555fd1cf69aecd565f148ede189 SHA256: 103d3daca9362ee83cb67875ddd7316e512b76c7e199df1cf7df36bb5b8e0b73 Section: libs Priority: optional Multi-Arch: same Homepage: http://kcat.strangesoft.net/openal.html Description: Software implementation of the OpenAL audio API (shared library) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This library is meant as a compatible update/replacement to the OpenAL Sample Implementation (the SI). The SI has been unmaintained for quite a while, and would require a lot of work to clean up. This is a fork the old Windows version to attempt an accelerated ALSA version of an OpenAL implementation. . OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as opposed to the SI's 4-channel max (though it did have some provisions for 6 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft does not support the Vorbis and MP3 extensions, however those were considered deprecated even in the SI. It does, though, support some of the newer extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and floating-point formats, as well as ALC_EXT_EFX for environmental audio effects, and others. . This package installs the OpenAL Soft shared library. Package: libopenal1-dbg Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 583 Depends: libopenal1 (= 1:1.17.2-5vnz1) Filename: i386/libopenal1-dbg_1.17.2-5vnz1_i386.deb Size: 513874 MD5sum: 4e2f7129890a4ae0767319312ff945cf SHA1: fd6b54e58c159ba819f2712a2514497c9400f76c SHA256: 2d2eb11ea31fcf746e8ac349f8d27d5ff209d680587a0666a3000ee385281cdd Section: debug Priority: extra Multi-Arch: same Homepage: http://kcat.strangesoft.net/openal.html Description: Software implementation of the OpenAL audio API (debug symbols) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . These symbols are useful in debugging the libopenal1 library. . This package installs the OpenAL Soft shared debug symbols. Build-Ids: c498cd53812e13d946ff4e0910ccea7fb5b2b6d0 Package: libopenal1-dbg Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 655 Depends: libopenal1 (= 1:1.17.2-5vnz1) Filename: amd64/libopenal1-dbg_1.17.2-5vnz1_amd64.deb Size: 578748 MD5sum: 1ce433136e2bdb99525eae55a9221713 SHA1: 11caa8c0499868c3cc33012a1db9c2751081ec55 SHA256: 1c4df70d4a65f22ee8ebbecfc2539a35568343888de37fa7e57910751db76ec7 Section: debug Priority: extra Multi-Arch: same Homepage: http://kcat.strangesoft.net/openal.html Description: Software implementation of the OpenAL audio API (debug symbols) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . These symbols are useful in debugging the libopenal1 library. . This package installs the OpenAL Soft shared debug symbols. Build-Ids: 2f6fa4473ee4b9d640b84a7c5f8f83e5ef8b000c Package: libopus-dbg Source: opus Version: 1.3.1-0.1 Architecture: i386 Maintainer: Ron Lee Installed-Size: 46 Depends: libopus0 (= 1.3.1-0.1) Filename: i386/libopus-dbg_1.3.1-0.1_i386.deb Size: 16126 MD5sum: 142103d7123300ed3c852264680f1e73 SHA1: f687f4c15cd1d589f631be2ccc3b7a2feebcb862 SHA256: dc892f2e7846b9f74b1b7f00599701df39cbeee55222ca0b38e7ff9ca3aaec97 Section: debug Priority: extra Multi-Arch: same Homepage: http://www.opus-codec.org Description: debugging symbols for libopus This package provides the detached debug symbols for libopus. Build-Ids: 9d8c3efac09869a8b8d8e04ae47a7d68bd899df2 Package: libopus-dbg Source: opus Version: 1.3.1-0.1 Architecture: amd64 Maintainer: Ron Lee Installed-Size: 52 Depends: libopus0 (= 1.3.1-0.1) Filename: amd64/libopus-dbg_1.3.1-0.1_amd64.deb Size: 15798 MD5sum: a28753cbb98d4a92467e00f7116e9e23 SHA1: 75cac8d9034caf807de62abc8159bc4d69a16fa3 SHA256: 600edfcce57a08fd4f7cf39fd0fe34a1ecbede15bf297c3de0260d43f8c7a4f3 Section: debug Priority: extra Multi-Arch: same Homepage: http://www.opus-codec.org Description: debugging symbols for libopus This package provides the detached debug symbols for libopus. Build-Ids: 786a3a8e71ed1d1e1b3cf65f96069df874659aa9 Package: libopus-dev Source: opus Version: 1.3.1-0.1 Architecture: i386 Maintainer: Ron Lee Installed-Size: 792 Depends: libopus0 (= 1.3.1-0.1) Filename: i386/libopus-dev_1.3.1-0.1_i386.deb Size: 244496 MD5sum: aecaaca72084df741a0f587a7eaf8721 SHA1: 7388b34459a24c95f29c96b91b56cbc332080941 SHA256: f50aec5848ca790faf54fd8daa1282aa0b07da0e73db5f66749aef17b1d2226c Section: libdevel Priority: optional Multi-Arch: same Homepage: http://www.opus-codec.org Description: Opus codec library development files The Opus codec is designed for interactive speech and audio transmission over the Internet. It is designed by the IETF Codec Working Group and incorporates technology from Skype's SILK codec and Xiph.Org's CELT codec. . It is intended to suit a wide range of interactive audio applications, including Voice over IP, videoconferencing, in-game chat, and even remote live music performances. It can scale from low bit-rate narrowband speech to very high quality stereo music. The current features are: . Bit-rates from 6 kb/s 510 kb/s Sampling rates from 8 to 48 kHz Frame sizes from 2.5 ms to 60 ms Support for both constant bit-rate (CBR) and variable bit-rate (VBR) Audio bandwidth from narrowband to full-band Support for speech and music Support for mono and stereo Support for up to 255 channels (multistream frames) Dynamically adjustable bitrate, audio bandwidth, and frame size Good loss robustness and packet loss concealment (PLC) Floating point and fixed-point implementation . This package provides the Opus library headers and development files. Package: libopus-dev Source: opus Version: 1.3.1-0.1 Architecture: amd64 Maintainer: Ron Lee Installed-Size: 855 Depends: libopus0 (= 1.3.1-0.1) Filename: amd64/libopus-dev_1.3.1-0.1_amd64.deb Size: 237416 MD5sum: 3ae1c22dbd046277a57d854873d24857 SHA1: d966f51000adaaed8f3e0d3ceb76029880893ea4 SHA256: e05b6241bfcd663be64a304c2bdf58cabb6fb35a9a1da97f690b8ddb5265ffc0 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://www.opus-codec.org Description: Opus codec library development files The Opus codec is designed for interactive speech and audio transmission over the Internet. It is designed by the IETF Codec Working Group and incorporates technology from Skype's SILK codec and Xiph.Org's CELT codec. . It is intended to suit a wide range of interactive audio applications, including Voice over IP, videoconferencing, in-game chat, and even remote live music performances. It can scale from low bit-rate narrowband speech to very high quality stereo music. The current features are: . Bit-rates from 6 kb/s 510 kb/s Sampling rates from 8 to 48 kHz Frame sizes from 2.5 ms to 60 ms Support for both constant bit-rate (CBR) and variable bit-rate (VBR) Audio bandwidth from narrowband to full-band Support for speech and music Support for mono and stereo Support for up to 255 channels (multistream frames) Dynamically adjustable bitrate, audio bandwidth, and frame size Good loss robustness and packet loss concealment (PLC) Floating point and fixed-point implementation . This package provides the Opus library headers and development files. Package: libopus-doc Source: opus Version: 1.3.1-0.1 Architecture: all Maintainer: Ron Lee Installed-Size: 1318 Filename: all/libopus-doc_1.3.1-0.1_all.deb Size: 196460 MD5sum: a4544f64d60e4a5ab3ec6516a9da5f4e SHA1: 3583a76cd5d13bf5cf6b9036e5e6dd71321b269f SHA256: 00a2771c40823e31a29019d11d7efebca57e0c7d2b886cd67a84bbadb633899d Section: doc Priority: optional Homepage: http://www.opus-codec.org Description: libopus API documentation This package contains the developer documentation for libopus. Package: libopus0 Source: opus Version: 1.3.1-0.1 Architecture: i386 Maintainer: Ron Lee Installed-Size: 392 Depends: libc6 (>= 2.4) Suggests: opus-tools, libopus-dev (= 1.3.1-0.1), libopus-doc (= 1.3.1-0.1) Filename: i386/libopus0_1.3.1-0.1_i386.deb Size: 193724 MD5sum: 399a74400c4082c7c6267979e63d6bb6 SHA1: 0b5d4f11dd03d5033a02a4f3e2f68aa145d5b991 SHA256: 19cb6e7c79076c73edd0176e2ba7472178ada826def41f127471c0eefd8c9d2c Section: libs Priority: optional Multi-Arch: same Homepage: http://www.opus-codec.org Description: Opus codec runtime library The Opus codec is designed for interactive speech and audio transmission over the Internet. It is designed by the IETF Codec Working Group and incorporates technology from Skype's SILK codec and Xiph.Org's CELT codec. . It is intended to suit a wide range of interactive audio applications, including Voice over IP, videoconferencing, in-game chat, and even remote live music performances. It can scale from low bit-rate narrowband speech to very high quality stereo music. The current features are: . Bit-rates from 6 kb/s 510 kb/s Sampling rates from 8 to 48 kHz Frame sizes from 2.5 ms to 60 ms Support for both constant bit-rate (CBR) and variable bit-rate (VBR) Audio bandwidth from narrowband to full-band Support for speech and music Support for mono and stereo Support for up to 255 channels (multistream frames) Dynamically adjustable bitrate, audio bandwidth, and frame size Good loss robustness and packet loss concealment (PLC) Floating point and fixed-point implementation . This package provides the Opus runtime library. Package: libopus0 Source: opus Version: 1.3.1-0.1 Architecture: amd64 Maintainer: Ron Lee Installed-Size: 372 Depends: libc6 (>= 2.14) Suggests: opus-tools, libopus-dev (= 1.3.1-0.1), libopus-doc (= 1.3.1-0.1) Filename: amd64/libopus0_1.3.1-0.1_amd64.deb Size: 189392 MD5sum: 2c4469e2dee1e8ffff75c110a5e67a35 SHA1: 7ca3da181f2329bfb90d096d93da21ffebd2726d SHA256: f437922f98aa20856497cbc9c02c6d107130ab85d0ade710b70d97fc631fb58c Section: libs Priority: optional Multi-Arch: same Homepage: http://www.opus-codec.org Description: Opus codec runtime library The Opus codec is designed for interactive speech and audio transmission over the Internet. It is designed by the IETF Codec Working Group and incorporates technology from Skype's SILK codec and Xiph.Org's CELT codec. . It is intended to suit a wide range of interactive audio applications, including Voice over IP, videoconferencing, in-game chat, and even remote live music performances. It can scale from low bit-rate narrowband speech to very high quality stereo music. The current features are: . Bit-rates from 6 kb/s 510 kb/s Sampling rates from 8 to 48 kHz Frame sizes from 2.5 ms to 60 ms Support for both constant bit-rate (CBR) and variable bit-rate (VBR) Audio bandwidth from narrowband to full-band Support for speech and music Support for mono and stereo Support for up to 255 channels (multistream frames) Dynamically adjustable bitrate, audio bandwidth, and frame size Good loss robustness and packet loss concealment (PLC) Floating point and fixed-point implementation . This package provides the Opus runtime library. Package: libopusfile-dbg Source: opusfile Version: 0.9+20170913-1 Architecture: i386 Maintainer: Ron Lee Installed-Size: 207 Depends: libopusfile0 (= 0.9+20170913-1) Filename: i386/libopusfile-dbg_0.9+20170913-1_i386.deb Size: 74448 MD5sum: bc52858a6b2123e4fbbaeaf8bad69d4b SHA1: 6b4e1cd109370669603010f8cbfff48f3f02f361 SHA256: 36b8fcab659f8d6046c71167582170d5a20a0eba8141c04a869ed8648b3f26fd Section: debug Priority: extra Homepage: http://www.opus-codec.org Description: debugging symbols for libopusfile This package provides the detached debug symbols for libopusfile. Package: libopusfile-dbg Source: opusfile Version: 0.9+20170913-1 Architecture: amd64 Maintainer: Ron Lee Installed-Size: 286 Depends: libopusfile0 (= 0.9+20170913-1) Filename: amd64/libopusfile-dbg_0.9+20170913-1_amd64.deb Size: 77824 MD5sum: c3e94bddc9f6ab8d1deaa6c75fa67d4f SHA1: 515d310f23d7fd008207d2d94970f84fc7b010d0 SHA256: 3c6ba2fef2d8dd0c26330f6a05f3e2c5d5ba133f08659f2a16a2576dd099cbb7 Section: debug Priority: extra Homepage: http://www.opus-codec.org Description: debugging symbols for libopusfile This package provides the detached debug symbols for libopusfile. Package: libopusfile-dev Source: opusfile Version: 0.9+20170913-1 Architecture: i386 Maintainer: Ron Lee Installed-Size: 234 Depends: libopusfile0 (= 0.9+20170913-1), libopus-dev (>= 1.0.1), libogg-dev (>= 1.3.0) Recommends: libssl-dev Filename: i386/libopusfile-dev_0.9+20170913-1_i386.deb Size: 67208 MD5sum: 8e04ff35c2ffb883d420a320e1f72d27 SHA1: df24add51e7ef14f6610676c1d028e0737991e64 SHA256: 46a64a74b3083ad45c8c27404aa37ae8e3e47437e2e6c861de3093fd6011bd1e Section: libdevel Priority: optional Homepage: http://www.opus-codec.org Description: High-level API for basic manipulation of Ogg Opus audio streams libopusfile provides several sets of built-in routines for file and stream access, and may also use custom stream I/O routines provided by the embedded environment. There are built-in I/O routines provided for ANSI-compliant stdio (FILE *), memory buffers, and URLs (including URLs, plus optionally and URLs). . It is implemented as a layer on top of Xiph.Org's reference libogg and libopus libraries. . This package provides the Opus library headers and development files. Package: libopusfile-dev Source: opusfile Version: 0.9+20170913-1 Architecture: amd64 Maintainer: Ron Lee Installed-Size: 228 Depends: libopusfile0 (= 0.9+20170913-1), libopus-dev (>= 1.0.1), libogg-dev (>= 1.3.0) Recommends: libssl-dev Filename: amd64/libopusfile-dev_0.9+20170913-1_amd64.deb Size: 59656 MD5sum: 51d52c1d81e4bf1abd42e3dfa685ad1e SHA1: feed70634ca4ab1efc89a809e8ca7a7555b1cba8 SHA256: 95f8d42dbce7c6e68763ae2984cbb15bdc822fc7f3623369f484e27b0fddfe37 Section: libdevel Priority: optional Homepage: http://www.opus-codec.org Description: High-level API for basic manipulation of Ogg Opus audio streams libopusfile provides several sets of built-in routines for file and stream access, and may also use custom stream I/O routines provided by the embedded environment. There are built-in I/O routines provided for ANSI-compliant stdio (FILE *), memory buffers, and URLs (including URLs, plus optionally and URLs). . It is implemented as a layer on top of Xiph.Org's reference libogg and libopus libraries. . This package provides the Opus library headers and development files. Package: libopusfile-doc Source: opusfile Version: 0.9+20170913-1 Architecture: all Maintainer: Ron Lee Installed-Size: 981 Filename: all/libopusfile-doc_0.9+20170913-1_all.deb Size: 158742 MD5sum: 2d00af7d58672a2bf78f519ac6c7baad SHA1: c294b220efa1c45bcfd7ddb739484a167a79233d SHA256: dccd70074d13de8814e4fded83197fc1bf5baa7216b80eda85669a179310bebf Section: doc Priority: optional Homepage: http://www.opus-codec.org Description: libopusfile API documentation This package contains the developer documentation for libopusfile. Package: libopusfile0 Source: opusfile Version: 0.9+20170913-1 Architecture: i386 Maintainer: Ron Lee Installed-Size: 111 Depends: libc6 (>= 2.16), libogg0 (>= 1.1.0), libopus0, libssl1.1 (>= 1.1.0) Filename: i386/libopusfile0_0.9+20170913-1_i386.deb Size: 46104 MD5sum: cdb6e0bb7afde79b44107ce51c8b915d SHA1: dadb42e0842ba8c6507309a43fc29f6b4cb90cc3 SHA256: 4b8427ee3314a9e23a882c6eee944f650504ad0c37ea993acdc98f44e58c45b9 Section: libs Priority: optional Homepage: http://www.opus-codec.org Description: High-level API for basic manipulation of Ogg Opus audio streams libopusfile provides several sets of built-in routines for file and stream access, and may also use custom stream I/O routines provided by the embedded environment. There are built-in I/O routines provided for ANSI-compliant stdio (FILE *), memory buffers, and URLs (including URLs, plus optionally and URLs). . It is implemented as a layer on top of Xiph.Org's reference libogg and libopus libraries. . This package provides the opusfile runtime library. Package: libopusfile0 Source: opusfile Version: 0.9+20170913-1 Architecture: amd64 Maintainer: Ron Lee Installed-Size: 99 Depends: libc6 (>= 2.16), libogg0 (>= 1.1.0), libopus0, libssl1.1 (>= 1.1.0) Filename: amd64/libopusfile0_0.9+20170913-1_amd64.deb Size: 38212 MD5sum: 4d8f1c2965c075deea2d8ac7891e0a1e SHA1: 3038737a8e3c6ec8e100ca339d93493a11151616 SHA256: 8b8cae5b2ec57a8246c18f5ad61c3a2a48ad524b139c6a15e59660d9ee02728a Section: libs Priority: optional Homepage: http://www.opus-codec.org Description: High-level API for basic manipulation of Ogg Opus audio streams libopusfile provides several sets of built-in routines for file and stream access, and may also use custom stream I/O routines provided by the embedded environment. There are built-in I/O routines provided for ANSI-compliant stdio (FILE *), memory buffers, and URLs (including URLs, plus optionally and URLs). . It is implemented as a layer on top of Xiph.Org's reference libogg and libopus libraries. . This package provides the opusfile runtime library. Package: liborc-0.4-0 Source: orc Version: 1:0.4.26-2 Architecture: i386 Maintainer: Maintainers of GStreamer packages Installed-Size: 632 Depends: libc6 (>= 2.4) Filename: i386/liborc-0.4-0_0.4.26-2_i386.deb Size: 151598 MD5sum: de1e2812be865c09979c4d02c0e0700e SHA1: de93ac870fa59e5ddd1aeec817e8032e8c753764 SHA256: 113e8f1f1139f703a7e632392250d76598f1d6ce9caea2550654d24618d9f753 Section: libs Priority: optional Multi-Arch: same Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the orc shared libraries. It is typically installed automatically when an application or library requires it. Package: liborc-0.4-0 Source: orc Version: 1:0.4.26-2 Architecture: amd64 Maintainer: Maintainers of GStreamer packages Installed-Size: 561 Depends: libc6 (>= 2.14) Filename: amd64/liborc-0.4-0_0.4.26-2_amd64.deb Size: 139742 MD5sum: 20ee6208b46e2040fe3462fb2b102c73 SHA1: 25f4e773350759cb14bbce07eb49fcd27f252fdb SHA256: f02d094942bcf50414e8c5605b228b631043365db16af3dd391e91ba8473f205 Section: libs Priority: optional Multi-Arch: same Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the orc shared libraries. It is typically installed automatically when an application or library requires it. Package: liborc-0.4-0-dbg Source: orc Version: 1:0.4.26-2 Architecture: i386 Maintainer: Maintainers of GStreamer packages Installed-Size: 453 Depends: liborc-0.4-0 (= 1:0.4.26-2) Filename: i386/liborc-0.4-0-dbg_0.4.26-2_i386.deb Size: 359668 MD5sum: 36b68066e2885f2ff85daeafe207945a SHA1: d86c3c0c84ba86a6b20d9e2d262182451037aedb SHA256: 76acb6b40e20064f16b8606a88c7406890f0e259e0404d5b2808653a0d529e4c Section: debug Priority: extra Multi-Arch: same Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler (debug package) Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the debugging symbols for the orc library. Users should install it if they want to debug software that uses orc. Build-Ids: 2b3a8d5cd3f4b2f0c36fd06c951cb5d52b73f5a0 e07aae3ecc590e743ce4e55900cd5dd6a37578a5 Package: liborc-0.4-0-dbg Source: orc Version: 1:0.4.26-2 Architecture: amd64 Maintainer: Maintainers of GStreamer packages Installed-Size: 604 Depends: liborc-0.4-0 (= 1:0.4.26-2) Filename: amd64/liborc-0.4-0-dbg_0.4.26-2_amd64.deb Size: 486108 MD5sum: 1a0279cb4793ab8e299d96cae72061ea SHA1: 39195e6dbb38a7e1867041c9b4aeb6269c169221 SHA256: dd6489b494ab9258a11398dd0c213d514228890cb516f84bfd3dc608135310d8 Section: debug Priority: extra Multi-Arch: same Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler (debug package) Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the debugging symbols for the orc library. Users should install it if they want to debug software that uses orc. Build-Ids: 7fbf489967c2b1b845156245acc88a830679c099 92c9dfd011f42706bbc2b8a975cd188701f50afe Package: liborc-0.4-dev Source: orc Version: 1:0.4.26-2 Architecture: i386 Maintainer: Maintainers of GStreamer packages Installed-Size: 1133 Depends: liborc-0.4-0 (= 1:0.4.26-2), liborc-0.4-dev-bin:any (= 1:0.4.26-2) Suggests: liborc-0.4-doc Provides: liborc-dev Filename: i386/liborc-0.4-dev_0.4.26-2_i386.deb Size: 199254 MD5sum: 856cebd35fa053e4ca178fbb08618f47 SHA1: b3e31619ca70ef025bd53e9944904c664f546fe1 SHA256: 69b4e59b686607125091eefb2fa7a547ebdafa59eb7cb084c855a748897eb031 Section: libdevel Priority: optional Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler (development headers) Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the development headers and libraries, and should be installed to compile software that uses orc. Package: liborc-0.4-dev Source: orc Version: 1:0.4.26-2 Architecture: amd64 Maintainer: Maintainers of GStreamer packages Installed-Size: 1258 Depends: liborc-0.4-0 (= 1:0.4.26-2), liborc-0.4-dev-bin:any (= 1:0.4.26-2) Suggests: liborc-0.4-doc Provides: liborc-dev Filename: amd64/liborc-0.4-dev_0.4.26-2_amd64.deb Size: 181194 MD5sum: 91f25902b688185d8cbf74ab84a9a5b6 SHA1: 7f8f5043c7b7a01be0750269ff8493dc5d2473af SHA256: 1e5f48b1d6ad99caa3e178826df767d795185d1bdb71d4b8ec61d395ce082d88 Section: libdevel Priority: optional Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler (development headers) Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the development headers and libraries, and should be installed to compile software that uses orc. Package: liborc-0.4-dev-bin Source: orc Version: 1:0.4.26-2 Architecture: i386 Maintainer: Maintainers of GStreamer packages Installed-Size: 75 Depends: libc6 (>= 2.4), liborc-0.4-0 (>= 1:0.4.25) Breaks: liborc-0.4-dev (<< 1:0.4.26-2~) Replaces: liborc-0.4-dev (<< 1:0.4.26-2~) Provides: liborc-dev-bin Filename: i386/liborc-0.4-dev-bin_0.4.26-2_i386.deb Size: 24702 MD5sum: 8d8316af9a1faaf49c73dcfd724d1a38 SHA1: 9e8001484d797515261e66ce87d9e2d33fe52623 SHA256: 4029754010c78a103c2b11b3882e04027d1e34dcc8d58cdb2b233ac0bd1c528a Section: libdevel Priority: optional Multi-Arch: allowed Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler (development tools) Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the development tools, and should not be installed directly. Package: liborc-0.4-dev-bin Source: orc Version: 1:0.4.26-2 Architecture: amd64 Maintainer: Maintainers of GStreamer packages Installed-Size: 82 Depends: libc6 (>= 2.4), liborc-0.4-0 (>= 1:0.4.25) Breaks: liborc-0.4-dev (<< 1:0.4.26-2~) Replaces: liborc-0.4-dev (<< 1:0.4.26-2~) Provides: liborc-dev-bin Filename: amd64/liborc-0.4-dev-bin_0.4.26-2_amd64.deb Size: 23570 MD5sum: 9eb36d0955cbdf2220a311f837bd6961 SHA1: 71127193cfe82a9dacbd5a6194358392d54af355 SHA256: 4f20656ad5e6fca17b26a754a13dee9d3217e86309854f5a136cd11f06b97ee0 Section: libdevel Priority: optional Multi-Arch: allowed Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler (development tools) Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the development tools, and should not be installed directly. Package: liborc-0.4-doc Source: orc Version: 1:0.4.26-2 Architecture: all Maintainer: Maintainers of GStreamer packages Installed-Size: 506 Suggests: liborc-0.4-dev Filename: all/liborc-0.4-doc_0.4.26-2_all.deb Size: 59424 MD5sum: 5e49ea47a15572e424eb8ee9b1bc8845 SHA1: c5f193189b347906d3491c918f4de2248b715f53 SHA256: 0d9d1c81d79ba6892ec334bba4164a69c7e2d0a2ec8a1ed89ebdc14259584d80 Section: doc Priority: optional Homepage: http://code.entropywave.com/projects/orc/ Description: Library of Optimized Inner Loops Runtime Compiler (documentation) Orc is a library and set of tools for compiling and executing very simple programs that operate on arrays of data. The "language" is a generic assembly language that represents many of the features available in SIMD architectures, including saturated addition and subtraction, and many arithmetic operations. . This package contains the documentation for orc. Package: libsnappy-dev Source: snappy Version: 1.1.3-2 Architecture: i386 Maintainer: Steinar H. Gunderson Installed-Size: 126 Depends: libsnappy1 (= 1.1.3-2) Filename: i386/libsnappy-dev_1.1.3-2_i386.deb Size: 63774 MD5sum: 16f208ccccd1956c87cb042a10b75e38 SHA1: 9461ace2e1cbc5f748fa04394592fe876a8c0920 SHA256: 65939e16177390d1164e1245ca8787395ad5570add01b543c2a39fc5793c91da Section: libdevel Priority: extra Multi-Arch: same Homepage: https://github.com/google/snappy/ Description: fast compression/decompression library (development files) Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. . For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about 500 MB/sec or more. . This package contains the development files required to build programs against Snappy. Package: libsnappy-dev Source: snappy Version: 1.1.3-2 Architecture: amd64 Maintainer: Steinar H. Gunderson Installed-Size: 130 Depends: libsnappy1 (= 1.1.3-2) Filename: amd64/libsnappy-dev_1.1.3-2_amd64.deb Size: 62610 MD5sum: 0ce5b0a62ccb682dbc83b5c8445adcaa SHA1: c7c0b0b1897fe633fe2c5fba63ebcfab5d80a612 SHA256: 3e8eaf5e0139e358c377357effae8c30e872a8cd813b8c199eb8c4c6c2f74659 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://github.com/google/snappy/ Description: fast compression/decompression library (development files) Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. . For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about 500 MB/sec or more. . This package contains the development files required to build programs against Snappy. Package: libsnappy1 Source: snappy Version: 1.1.3-2 Architecture: i386 Maintainer: Steinar H. Gunderson Installed-Size: 84 Depends: libc6 (>= 2.1.3), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Filename: i386/libsnappy1_1.1.3-2_i386.deb Size: 53316 MD5sum: 03c62004cb88d3aa1d4c72899e713932 SHA1: 16e72fcd3e4421e512262d40aebb4add3754ca5f SHA256: e9d3371fd829e6bf6de86106f7fdabebe5221825b2787b4fb1e286d734190f6e Section: libs Priority: extra Multi-Arch: same Homepage: https://github.com/google/snappy/ Description: fast compression/decompression library Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. . For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about 500 MB/sec or more. Package: libsnappy1 Source: snappy Version: 1.1.3-2 Architecture: amd64 Maintainer: Steinar H. Gunderson Installed-Size: 85 Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Filename: amd64/libsnappy1_1.1.3-2_amd64.deb Size: 52520 MD5sum: b9cc05b26e5cf2d2a3a594d54986ce53 SHA1: 2626c6464d60832c390b7d1e5b6f396936749754 SHA256: b484aa473d6154da15416eeb587f0d23bfe08a413333c79a9447febc65e632d8 Section: libs Priority: extra Multi-Arch: same Homepage: https://github.com/google/snappy/ Description: fast compression/decompression library Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. . For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about 500 MB/sec or more. Package: libsnappy1-dbgsym Source: snappy Version: 1.1.3-2 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Steinar H. Gunderson Installed-Size: 19 Depends: libsnappy1 (= 1.1.3-2) Filename: i386/libsnappy1-dbgsym_1.1.3-2_i386.deb Size: 3636 MD5sum: 3b3ed7206ab8cf448b172f9290549cba SHA1: 910afb3a060ee5c605751a6768a5fdca24b9fa59 SHA256: ddcf7e3bbf091e813d334f5bf61565373a714da4c9d5e0a8cced8d874bb41313 Section: debug Priority: extra Multi-Arch: same Homepage: https://github.com/google/snappy/ Description: Debug symbols for libsnappy1 Build-Ids: 8cfa1bebefa22ca3ba5ccaedeb35c80dbfc77dbd Package: libsnappy1-dbgsym Source: snappy Version: 1.1.3-2 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Steinar H. Gunderson Installed-Size: 20 Depends: libsnappy1 (= 1.1.3-2) Filename: amd64/libsnappy1-dbgsym_1.1.3-2_amd64.deb Size: 3650 MD5sum: 57c3f4b99b80c63a7e0639787ba9d02a SHA1: c445f45c1a2b6aa2082786a5909a900a238e9331 SHA256: b8d1aa0a2da71ad3f4ff784d71644f8ad65f23508afab320b3d3922d1b43de7d Section: debug Priority: extra Multi-Arch: same Homepage: https://github.com/google/snappy/ Description: Debug symbols for libsnappy1 Build-Ids: ae2d70013c8bda401c1030d8bcfd8b1ff51f19bc Package: libspatialindex-c4 Source: spatialindex Version: 1.8.5-1 Architecture: i386 Maintainer: Debian GIS Project Installed-Size: 230 Depends: libc6 (>= 2.3.6-6~), libgcc1 (>= 1:3.0), libspatialindex4, libstdc++6 (>= 5.2) Filename: i386/libspatialindex-c4_1.8.5-1_i386.deb Size: 63234 MD5sum: 737fb4fa9684ec00e62379968ae8bfe1 SHA1: f719deb5b03a8fe05dabec52e5968d66fafd2e0e SHA256: 51dea2308111ebe5bb33ecdad122091c5b1ad277267113bebfbb847a0004032e Section: libs Priority: optional Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - C library Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains the SpatialIndex shared library for C. Package: libspatialindex-c4 Source: spatialindex Version: 1.8.5-1 Architecture: amd64 Maintainer: Debian GIS Project Installed-Size: 211 Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libspatialindex4, libstdc++6 (>= 5.2) Filename: amd64/libspatialindex-c4_1.8.5-1_amd64.deb Size: 60068 MD5sum: fe0a284de37f87ed9959f395d5167a4a SHA1: 352662c781de96e765dda81ecf6f448305df113d SHA256: 0b527198de96862d02d0808c75b59783a791530162d31635318ff1758ffad432 Section: libs Priority: optional Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - C library Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains the SpatialIndex shared library for C. Package: libspatialindex-dev Source: spatialindex Version: 1.8.5-1 Architecture: i386 Maintainer: Debian GIS Project Installed-Size: 1816 Depends: libspatialindex4 (= 1.8.5-1), libspatialindex-c4 (= 1.8.5-1) Recommends: pkg-config Filename: i386/libspatialindex-dev_1.8.5-1_i386.deb Size: 323070 MD5sum: 998bc629032361d83854f454618d8cfe SHA1: 28588ba1467e612c6d21fee1b2542092b7aa7b4e SHA256: d2b433539c8e9277ded0df8f7bd7889bf324f0a259d94ddc50e729e0a001c9b4 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - development files Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains the development files to build third parties programs. Package: libspatialindex-dev Source: spatialindex Version: 1.8.5-1 Architecture: amd64 Maintainer: Debian GIS Project Installed-Size: 2126 Depends: libspatialindex4 (= 1.8.5-1), libspatialindex-c4 (= 1.8.5-1) Recommends: pkg-config Filename: amd64/libspatialindex-dev_1.8.5-1_amd64.deb Size: 292050 MD5sum: 570adafc372829b881fa0be0e4533138 SHA1: 8c63d141a8e0a0f6e830e0f23354d0010850fa69 SHA256: d1346c1f0d354838cdb0c6662770ffaef74cb1c5cf2c3b273f0de9bf94823e02 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - development files Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains the development files to build third parties programs. Package: libspatialindex4 Source: spatialindex Version: 1.8.5-1 Architecture: i386 Maintainer: Debian GIS Project Installed-Size: 791 Depends: libc6 (>= 2.3.6-6~), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Recommends: libspatialindex-c4 (= 1.8.5-1) Filename: i386/libspatialindex4_1.8.5-1_i386.deb Size: 239908 MD5sum: 8b0ac17ff389960799cda8180dd248e2 SHA1: 0f7d74eb44ff3884d1080121ca9f5ac11f56dbe4 SHA256: 6c91514f0f71698a6a8ca1f54c12cd6898420696915a4cd868bff2285941233e Section: libs Priority: optional Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - C++ library Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains the SpatialIndex shared library. Package: libspatialindex4 Source: spatialindex Version: 1.8.5-1 Architecture: amd64 Maintainer: Debian GIS Project Installed-Size: 780 Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2) Recommends: libspatialindex-c4 (= 1.8.5-1) Filename: amd64/libspatialindex4_1.8.5-1_amd64.deb Size: 216410 MD5sum: 0ba5d0957574f9935d0f9e204cd0ec95 SHA1: 776d5d29b3dae045e1b455cfad110a6e0673d306 SHA256: 2d4a4f3145f0c02e9a57ed8294129423465f6a90340124b453ddce71681d98f2 Section: libs Priority: optional Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - C++ library Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains the SpatialIndex shared library. Package: libspatialindex4-dbg Source: spatialindex Version: 1.8.5-1 Architecture: i386 Maintainer: Debian GIS Project Installed-Size: 172 Depends: libspatialindex4 (= 1.8.5-1), libspatialindex-c4 (= 1.8.5-1) Filename: i386/libspatialindex4-dbg_1.8.5-1_i386.deb Size: 41106 MD5sum: f9e39053033812b1ccc9905d609baad1 SHA1: ca64244ccc6b6b9d322d71b8357513a09e38c993 SHA256: e2f45e30c4ba94bd76a605033a0e0b2d42019ca208523d12eb1cfe37bbbad925 Section: debug Priority: extra Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - debugging symbols Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains debugging symbols for the libraries. Build-Ids: 48f5cf80b678072140eccf5601db7ef878b312f2 Package: libspatialindex4-dbg Source: spatialindex Version: 1.8.5-1 Architecture: amd64 Maintainer: Debian GIS Project Installed-Size: 191 Depends: libspatialindex4 (= 1.8.5-1), libspatialindex-c4 (= 1.8.5-1) Filename: amd64/libspatialindex4-dbg_1.8.5-1_amd64.deb Size: 41730 MD5sum: f668e33fb6d6acb4edef3b0a6a7547c7 SHA1: 46bc32aec5e84968abe762163162ea35d36812ff SHA256: f3f556cc7e4bf9b239527b8183d3cc1cbb55df0726c22a82aa2445753ed58011 Section: debug Priority: extra Multi-Arch: same Homepage: http://libspatialindex.github.io/ Description: General framework for developing spatial indices - debugging symbols Spatialindex is a C++ library that provides a framework for developing spatial indices. Currently it defines generic interfaces, provides simple main memory and disk based storage managers and a robust implementation of an R*-tree, an MVR-tree and a TPR-tree. . This package contains debugging symbols for the libraries. Build-Ids: e46bfd58dadbf387ecc3144b2888653f5f583efd Package: libtrio-dev Source: libtrio Version: 1.16.dfsg1-3 Architecture: i386 Maintainer: Balint Reczey Installed-Size: 644 Depends: libtrio2 (= 1.16.dfsg1-3) Filename: i386/libtrio-dev_1.16.dfsg1-3_i386.deb Size: 139958 MD5sum: 76950d0758e8457e01322b11518d0d91 SHA1: c0918baa4270f0726721af9e7c3913ed3fa43503 SHA256: c9dc91bf744bceb4442a6d6e03bfe47bcf55e25ba239a5c8802babf4f6e0ce90 Section: libdevel Priority: extra Homepage: http://daniel.haxx.se/projects/trio/ Description: portable and extendable printf and string functions development files Trio is a fully matured and stable set of printf and string functions designed be used by applications with focus on portability or with the need for additional features that are not supported by standard stdio implementation. . This package provides header files and static libraries. Package: libtrio-dev Source: libtrio Version: 1.16.dfsg1-3 Architecture: amd64 Maintainer: Balint Reczey Installed-Size: 664 Depends: libtrio2 (= 1.16.dfsg1-3) Filename: amd64/libtrio-dev_1.16.dfsg1-3_amd64.deb Size: 137342 MD5sum: a334af43297b18e66729fe6682119338 SHA1: 566fba31d9efa88d7feeb91170db8420d89c4a43 SHA256: 03f0041556c99cfdf79f56d4bdf1731da4c0d75023f321e2a99ee9f2bf6b1d80 Section: libdevel Priority: extra Homepage: http://daniel.haxx.se/projects/trio/ Description: portable and extendable printf and string functions development files Trio is a fully matured and stable set of printf and string functions designed be used by applications with focus on portability or with the need for additional features that are not supported by standard stdio implementation. . This package provides header files and static libraries. Package: libtrio2 Source: libtrio Version: 1.16.dfsg1-3 Architecture: i386 Maintainer: Balint Reczey Installed-Size: 110 Depends: libc6 (>= 2.3) Recommends: libtrio-dev (= 1.16.dfsg1-3) Filename: i386/libtrio2_1.16.dfsg1-3_i386.deb Size: 43922 MD5sum: d4add84a4abdd25d28576a4aa6a87cbc SHA1: f7059eafb428a973daa8b5ffbffa22d7d17b043f SHA256: 6152c7c8823e3304346e7afc802c9856348f4033f133efc5fba3529f5096f3f7 Section: libs Priority: extra Multi-Arch: same Homepage: http://daniel.haxx.se/projects/trio/ Description: portable and extendable printf and string functions Trio is a fully matured and stable set of printf and string functions designed be used by applications with focus on portability or with the need for additional features that are not supported by standard stdio implementation. Package: libtrio2 Source: libtrio Version: 1.16.dfsg1-3 Architecture: amd64 Maintainer: Balint Reczey Installed-Size: 103 Depends: libc6 (>= 2.3) Recommends: libtrio-dev (= 1.16.dfsg1-3) Filename: amd64/libtrio2_1.16.dfsg1-3_amd64.deb Size: 42100 MD5sum: 19eda6eb9ed408a7e77772324bec919f SHA1: da2898059c9734e50b05079456a4d9b74db13405 SHA256: 4a22598034c4680181de8e0fc429b49c7975451fa60487333ec867cef4f0860e Section: libs Priority: extra Multi-Arch: same Homepage: http://daniel.haxx.se/projects/trio/ Description: portable and extendable printf and string functions Trio is a fully matured and stable set of printf and string functions designed be used by applications with focus on portability or with the need for additional features that are not supported by standard stdio implementation. Package: libtrio2-dbgsym Source: libtrio Version: 1.16.dfsg1-3 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Balint Reczey Installed-Size: 72 Depends: libtrio2 (= 1.16.dfsg1-3) Filename: i386/libtrio2-dbgsym_1.16.dfsg1-3_i386.deb Size: 48422 MD5sum: bb5ddc6a2c9632c59acbe9e87e9f4dc1 SHA1: d04fa65148d87c826fb06651c34ba620d830abb9 SHA256: 44ac34ceaaa7a167f4ad847c94993bb1e9313855ce2892d29e5f06ea083a0070 Section: debug Priority: extra Multi-Arch: same Homepage: http://daniel.haxx.se/projects/trio/ Description: Debug symbols for libtrio2 Build-Ids: 25926686e67ac446584189504373435bfc4c3a8e Package: libtrio2-dbgsym Source: libtrio Version: 1.16.dfsg1-3 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Balint Reczey Installed-Size: 91 Depends: libtrio2 (= 1.16.dfsg1-3) Filename: amd64/libtrio2-dbgsym_1.16.dfsg1-3_amd64.deb Size: 64124 MD5sum: c2ef81e15120d8009c6610333a36a19d SHA1: 615bca0b190f4e4b4ee47f6df961aabb9f045e03 SHA256: 6051bf2e354f26ff896f3775321da1b8b950b7032ac53460020704dcf74246bb Section: debug Priority: extra Multi-Arch: same Homepage: http://daniel.haxx.se/projects/trio/ Description: Debug symbols for libtrio2 Build-Ids: 452378947d7704b9a09f08c81e54789a385968e7 Package: libturbojpeg0 Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 594 Depends: libc6 (>= 2.11) Conflicts: libjpeg-turbo8, libturbojpeg Replaces: libturbojpeg Filename: i386/libturbojpeg0_1.5.2-2.0_i386.deb Size: 171374 MD5sum: 48a658cc4184672ee5f2734b6d9e4212 SHA1: 00b42ae530df122a280c9ada3b4a863c0dfcce9d SHA256: fe17e380a6350945242262c321517549733535ee5c212a043278632328a58e4f Section: libs Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: TurboJPEG runtime library - SIMD optimized The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. . This package contains the TurboJPEG shared runtime library. Package: libturbojpeg0 Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 663 Depends: libc6 (>= 2.14) Conflicts: libjpeg-turbo8, libturbojpeg Replaces: libturbojpeg Filename: amd64/libturbojpeg0_1.5.2-2.0_amd64.deb Size: 195616 MD5sum: d6c796cd7984b7394ee317960b428915 SHA1: d747deae5f109ad8346c8be14fb0858750d35e09 SHA256: 5f35f332e28cc2b2808acefe16fd515c048d505da2fb061e517095e0e9aca2a1 Section: libs Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: TurboJPEG runtime library - SIMD optimized The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. . This package contains the TurboJPEG shared runtime library. Package: libturbojpeg0-dbgsym Source: libjpeg-turbo Version: 1:1.5.2-2.0 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 467 Depends: libturbojpeg0 (= 1:1.5.2-2.0) Breaks: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Replaces: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Filename: i386/libturbojpeg0-dbgsym_1.5.2-2.0_i386.deb Size: 385306 MD5sum: 4a58b7ae703e68bd232e44a5fc6b87ae SHA1: 7b0df82c8cf645be313b4250c143ef4ad0f78d00 SHA256: d9f07dffc6cd8b16190a2595b1cc93753968c3308594ed383f9e901c0a1c2032 Section: debug Priority: extra Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Debug symbols for libturbojpeg0 Build-Ids: caa87887ec638819093eb6d5edd62fca99ac712b Package: libturbojpeg0-dbgsym Source: libjpeg-turbo Version: 1:1.5.2-2.0 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 528 Depends: libturbojpeg0 (= 1:1.5.2-2.0) Breaks: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Replaces: libjpeg-turbo-progs-dbg (<< 1.5.0-1~), libjpeg62-turbo-dbg (<< 1.5.0-1~), libturbojpeg0-dbg (<< 1.5.0-1~) Filename: amd64/libturbojpeg0-dbgsym_1.5.2-2.0_amd64.deb Size: 456390 MD5sum: e0bfc4a44803439c217a0ce72aaec8f8 SHA1: 6172d0de6014930153caaf9b0bb21a2af8a1dfb2 SHA256: 7c3c6fea25b813d784e8914753a55c13dd57fce47fe743f035ec73707fc4bfbb Section: debug Priority: extra Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Debug symbols for libturbojpeg0 Build-Ids: c92a091e49cb3e1e48179d352e4f3f33eb858f43 Package: libturbojpeg0-dev Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: i386 Maintainer: Ondřej Surý Installed-Size: 886 Depends: libturbojpeg0 (= 1:1.5.2-2.0) Conflicts: libjpeg-turbo8-dev, libturbojpeg-dev, libturbojpeg1-dev Replaces: libturbojpeg-dev Provides: libturbojpeg-dev Filename: i386/libturbojpeg0-dev_1.5.2-2.0_i386.deb Size: 212910 MD5sum: 683e4c558424117f74d70f1e0deb6b04 SHA1: c66ac51626e630cc720498626943e8ff2fb25e08 SHA256: 6974c195da1d090ca6a73cc9254f02f821ea5d77b9fede0944e7b2a7dfe3cecc Section: libdevel Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Development files for the TurboJPEG library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. . This package contains the static library, headers and documentation for the TurboJPEG library. Package: libturbojpeg0-dev Source: libjpeg-turbo Version: 1:1.5.2-2.0 Architecture: amd64 Maintainer: Ondřej Surý Installed-Size: 957 Depends: libturbojpeg0 (= 1:1.5.2-2.0) Conflicts: libjpeg-turbo8-dev, libturbojpeg-dev, libturbojpeg1-dev Replaces: libturbojpeg-dev Provides: libturbojpeg-dev Filename: amd64/libturbojpeg0-dev_1.5.2-2.0_amd64.deb Size: 226874 MD5sum: 964d8859af6abe5914f90dbfcc685c89 SHA1: 69bee8768fa83c14a7ec72070854efd49f812f8a SHA256: 7209de6ce98f1cb5bf61482fb84c508dab304093058bbdd439317fa21dc57382 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://www.libjpeg-turbo.org/ Description: Development files for the TurboJPEG library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. . This package contains the static library, headers and documentation for the TurboJPEG library. Package: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Architecture: i386 Maintainer: Enrico Tassi Installed-Size: 525 Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20210112+dfsg-0), libluajit-5.1-common (= 2.1.0~beta3+git20210112+dfsg-0), libc6 (>= 2.2), libgcc1 (>= 1:3.3) Filename: i386/luajit_2.1.0~beta3+git20210112+dfsg-0_i386.deb Size: 245690 MD5sum: cf3a277762e58629f2c28e94dc8e74de SHA1: 7f1158552a1617dd590c381c006837ac4cb58320 SHA256: 26f6bcf7ee2e7dfe05af2c53405f84241a6492d300ac8447862646c327f1623c Section: interpreters Priority: optional Multi-Arch: foreign Homepage: http://luajit.org Description: Just in time compiler for Lua programming language version 5.1 LuaJIT implements the full set of language features defined by Lua 5.1. The virtual machine (VM) is API- and ABI-compatible to the standard Lua interpreter and can be deployed as a drop-in replacement. . This package contains the standalone interpreter/jitter that can be used as a replacement for the standard lua5.1 interpreter. Package: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Architecture: amd64 Maintainer: Enrico Tassi Installed-Size: 518 Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20210112+dfsg-0), libluajit-5.1-common (= 2.1.0~beta3+git20210112+dfsg-0), libc6 (>= 2.14), libgcc1 (>= 1:3.3) Filename: amd64/luajit_2.1.0~beta3+git20210112+dfsg-0_amd64.deb Size: 236426 MD5sum: 34588492fc91d0ba6d7467d95cfdd21c SHA1: b2d42b5d1677d05a18eba0769795592665b5b9ed SHA256: 5f11a766d51a052bc34b9b2c57d3048003230bec12b0624404d9a80b38eb9f94 Section: interpreters Priority: optional Multi-Arch: foreign Homepage: http://luajit.org Description: Just in time compiler for Lua programming language version 5.1 LuaJIT implements the full set of language features defined by Lua 5.1. The virtual machine (VM) is API- and ABI-compatible to the standard Lua interpreter and can be deployed as a drop-in replacement. . This package contains the standalone interpreter/jitter that can be used as a replacement for the standard lua5.1 interpreter. Package: luajit-dbgsym Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Enrico Tassi Installed-Size: 666 Depends: luajit (= 2.1.0~beta3+git20210112+dfsg-0) Filename: i386/luajit-dbgsym_2.1.0~beta3+git20210112+dfsg-0_i386.deb Size: 624020 MD5sum: aa82a2cd211dbb78ab977fadf3f6325c SHA1: 06101f83934e49810d8d8fb3db73bb9f4f232f5d SHA256: 3ff6cd71474478ceb580117e2862691208c4a2aa011821f10b14437a21fb4c57 Section: debug Priority: extra Homepage: http://luajit.org Description: Debug symbols for luajit Build-Ids: 4e45c6ad0f18c25edb51057ef467774e543cb242 Package: luajit-dbgsym Source: luajit Version: 2.1.0~beta3+git20210112+dfsg-0 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Enrico Tassi Installed-Size: 691 Depends: luajit (= 2.1.0~beta3+git20210112+dfsg-0) Filename: amd64/luajit-dbgsym_2.1.0~beta3+git20210112+dfsg-0_amd64.deb Size: 644592 MD5sum: a6e652552a0046f9d6d8c532e8817ab7 SHA1: b4d466f77fcfd8b6aad1d374ab7e5e765f1d1b0f SHA256: 4d53d39d2a3c4b5f0b76c4c6ed6b093936761ff7a96e6644fbc58eb8bf10485c Section: debug Priority: extra Homepage: http://luajit.org Description: Debug symbols for luajit Build-Ids: 7b63c5ec70318e9b3786853072149bc621b3cfbd Package: makehrtf Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 64 Depends: libopenal1 (= 1:1.17.2-5vnz1), libc6 (>= 2.7) Breaks: libopenal-dev-bin (<< 1:1.15.1-5~) Replaces: libopenal-dev-bin (<< 1:1.15.1-5~) Filename: i386/makehrtf_1.17.2-5vnz1_i386.deb Size: 29656 MD5sum: 8f0591e80c5b82b93d0c69172436df88 SHA1: 44cc30761e4088c6fba52bfb6f437adb02d74531 SHA256: a1cfd834e5e860946de25810e21a407c1b6310b05bfb5503c780d45cef7938f8 Section: sound Priority: optional Multi-Arch: allowed Homepage: http://kcat.strangesoft.net/openal.html Description: HRTF Processing and Composition Utility OpenAL Soft is a branch of OpenAL which has filtering implemented in software, and it also adds support for head-related transfer functions (HRTFs). HRTFs permit 3D auralization through stereo earphones. . This package installs the makehrtf utility. Package: makehrtf Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 64 Depends: libopenal1 (= 1:1.17.2-5vnz1), libc6 (>= 2.7) Breaks: libopenal-dev-bin (<< 1:1.15.1-5~) Replaces: libopenal-dev-bin (<< 1:1.15.1-5~) Filename: amd64/makehrtf_1.17.2-5vnz1_amd64.deb Size: 28286 MD5sum: f21087fbcd45e4e322160e10d4265c05 SHA1: 1e5c27f214b496800e1a9ef5a221bc2d545c2139 SHA256: a2f4759ae0b786578f1f995940c544f45126aabcd93e9edcbf88a98a84603dea Section: sound Priority: optional Multi-Arch: allowed Homepage: http://kcat.strangesoft.net/openal.html Description: HRTF Processing and Composition Utility OpenAL Soft is a branch of OpenAL which has filtering implemented in software, and it also adds support for head-related transfer functions (HRTFs). HRTFs permit 3D auralization through stereo earphones. . This package installs the makehrtf utility. Package: makehrtf-dbgsym Source: openal-soft Version: 1:1.17.2-5vnz1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian Games Team Installed-Size: 48 Depends: makehrtf (= 1:1.17.2-5vnz1) Filename: i386/makehrtf-dbgsym_1.17.2-5vnz1_i386.deb Size: 35528 MD5sum: cdd2a66719538c24f1e25639554dfaec SHA1: 7d6cfe650d414b19093642a6568dcb0050b35aaa SHA256: e7a0d74be0f63472a3d6e2886c21b6398dd253e186331361ab60b93bd54d96f7 Section: debug Priority: extra Homepage: http://kcat.strangesoft.net/openal.html Description: Debug symbols for makehrtf Build-Ids: 8cf2831aaabb2306c816d9dd0d71524f9bf5eedd Package: makehrtf-dbgsym Source: openal-soft Version: 1:1.17.2-5vnz1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 53 Depends: makehrtf (= 1:1.17.2-5vnz1) Filename: amd64/makehrtf-dbgsym_1.17.2-5vnz1_amd64.deb Size: 38536 MD5sum: 0b6469b22b28df489e0b4a6cb6f869c9 SHA1: f2da84c0de8239ee48732db37f400127579b13f9 SHA256: 410bbe6a94afebd51a9e25b94d092c39582be4f3cb664617826aaac7e2b2fc27 Section: debug Priority: extra Homepage: http://kcat.strangesoft.net/openal.html Description: Debug symbols for makehrtf Build-Ids: 3d033434cf5feb49390e13305091c7db6ba8d14d Package: mednafen08 Source: mednafen Version: 0.8.D.3-7 Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 7782 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.17), libcdio13 (>= 0.83), libgcc1 (>= 1:4.2), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libsdl-net1.2, libsdl1.2debian (>= 1.2.11), libsndfile1 (>= 1.0.20), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4) Recommends: emulators-launchers-essencials, mime-support, shared-mime-info (= 0.71-4vnz1) | shared-mime-info (= 0.90-1vnz1), mednafen09 Suggests: mednafen-bioses, mednafen-server, mednafen12 Conflicts: mednafen, vnz-mednafen Replaces: vnz-mednafen Provides: gba-emulator, gbc-emulator, gg-emulator, lnx-emulator, lynx-emulator, mednafen, nes-emulator, ngc-emulator, ngp-emulator, pce-emulator, sgg-emulator, sms-emulator, wsc-emulator Filename: i386/mednafen08_0.8.D.3-7_i386.deb Size: 1985108 MD5sum: b264a183c7f9cfe02874e884df16090f SHA1: 16aa91abb35666e4d3c9a9dcf4f68b055e09777c SHA256: 499ff186d8d766a7e59d3d2a3c1f6d06f89155cc6c82eb556a6706da6784f906 Section: otherosfs Priority: optional Homepage: http://mednafen.sourceforge.net Description: massenkoh multi emulator : NES, GBA, WSC, PCE, GG, SMS, NGP, LNX Multiple systems console emulator machine for most 8bit and 16 bit console rom games, for massenkoh and VENENUX especialy optimized. . Mednafen is a command-line driven emulator for many different systems. It has full support for OpenGL and SDL graphics, network play, remappable input configuration, joystick and keyboard support, save states, game rewinding, GSF playback, and screenshots. This is the low performance version, for better graphics (but more requeriments) and more powerfully machines see hq version. . The systems supported by Mednafen are: * Atari Lynx * GameBoy * GameBoy Color * GameBoy Advance * Game Gear * Nintendo * Master System * PC Engine * TurboGrafx 16 * PC-FX * SuperGrafx * NeoGeo Pocket * NeoGeo Pocket Color * WonderSwan * WonderSwan Color . Hardware emulated by Mednafen includes: * NES gamepad, Zapper, PowerPad * Four-Score, Famicom multiplayer adapter * Arcade : Arkanoid, HyperShot, Space Shadow, Mahjong controllers * Oeka Kids tablet, Quiz King buzzers, Family Trainer, Barcode World * Game Genie TV mode of Sega Game Gear are not supported. Arceade and addons harware for Sega Master Systems are not yet emulated also. . U may refer to docs for more information or manpages, there is not need bios files for run rom images, only ecxeption by PC Engine CD and Lynx. Package: mednafen08 Source: mednafen Version: 0.8.D.3-7 Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 7575 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.22), libcdio13 (>= 0.83), libgcc1 (>= 1:3.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libsdl-net1.2, libsdl1.2debian (>= 1.2.11), libsndfile1 (>= 1.0.20), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4) Recommends: emulators-launchers-essencials, mime-support, shared-mime-info (= 0.71-4vnz1) | shared-mime-info (= 0.90-1vnz1), mednafen09 Suggests: mednafen-bioses, mednafen-server, mednafen12 Conflicts: mednafen, vnz-mednafen Replaces: vnz-mednafen Provides: gba-emulator, gbc-emulator, gg-emulator, lnx-emulator, lynx-emulator, mednafen, nes-emulator, ngc-emulator, ngp-emulator, pce-emulator, sgg-emulator, sms-emulator, wsc-emulator Filename: amd64/mednafen08_0.8.D.3-7_amd64.deb Size: 2130916 MD5sum: a1dcbdb89fbfe02c502c6929f20b84f0 SHA1: 4ae9d3646e0aeb273179c6ca8991aa91b003d288 SHA256: 03c4544e83dc452e612f9e170cc9df428a95ab160d25381109f2f1f8534a0ea6 Section: otherosfs Priority: optional Homepage: http://mednafen.sourceforge.net Description: massenkoh multi emulator : NES, GBA, WSC, PCE, GG, SMS, NGP, LNX Multiple systems console emulator machine for most 8bit and 16 bit console rom games, for massenkoh and VENENUX especialy optimized. . Mednafen is a command-line driven emulator for many different systems. It has full support for OpenGL and SDL graphics, network play, remappable input configuration, joystick and keyboard support, save states, game rewinding, GSF playback, and screenshots. This is the low performance version, for better graphics (but more requeriments) and more powerfully machines see hq version. . The systems supported by Mednafen are: * Atari Lynx * GameBoy * GameBoy Color * GameBoy Advance * Game Gear * Nintendo * Master System * PC Engine * TurboGrafx 16 * PC-FX * SuperGrafx * NeoGeo Pocket * NeoGeo Pocket Color * WonderSwan * WonderSwan Color . Hardware emulated by Mednafen includes: * NES gamepad, Zapper, PowerPad * Four-Score, Famicom multiplayer adapter * Arcade : Arkanoid, HyperShot, Space Shadow, Mahjong controllers * Oeka Kids tablet, Quiz King buzzers, Family Trainer, Barcode World * Game Genie TV mode of Sega Game Gear are not supported. Arceade and addons harware for Sega Master Systems are not yet emulated also. . U may refer to docs for more information or manpages, there is not need bios files for run rom images, only ecxeption by PC Engine CD and Lynx. Package: mednafen08-dbgsym Source: mednafen Version: 0.8.D.3-7 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 442 Depends: mednafen08 (= 0.8.D.3-7) Filename: i386/mednafen08-dbgsym_0.8.D.3-7_i386.deb Size: 112690 MD5sum: c37e818f421dd652d365662c68782e57 SHA1: 4f93bfa735afb35d004dc587b2995f80aafbc0d4 SHA256: 5903f6ab396e77dfe7ef6c1ea04d89dd50c9c57d4c5a8e288e936e02e33456ab Section: debug Priority: extra Homepage: http://mednafen.sourceforge.net Description: Debug symbols for mednafen08 Build-Ids: 90d57e12fe3e00ae687d730f270ca7034325a589 Package: mednafen08-dbgsym Source: mednafen Version: 0.8.D.3-7 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 332 Depends: mednafen08 (= 0.8.D.3-7) Filename: amd64/mednafen08-dbgsym_0.8.D.3-7_amd64.deb Size: 81686 MD5sum: b0a560c670b7727ba27d68f605bb9132 SHA1: 2570bf7fbe40e9e4513b9640f16ea95de4436826 SHA256: 909c7c627a69b221278de0e90fa77d518498aabb7dfa7fdb02b00aed7aebdef8 Section: debug Priority: extra Homepage: http://mednafen.sourceforge.net Description: Debug symbols for mednafen08 Build-Ids: e84c083a6d48846b79d44672ac8e03181f5498d0 Package: mednafen09 Version: 0.9.48-0 Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 12714 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.17), libgcc1 (>= 1:4.2), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libsdl1.2debian (>= 1.2.11), libsndfile1 (>= 1.0.20), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.3.4) Recommends: emulators-launchers-essencials, mime-support, shared-mime-info (= 0.71-4vnz1) | shared-mime-info (= 0.90-1vnz1) Suggests: mednafen-bioses, mednafen-server, mednafen08, mednaffe09 | mednaffe Conflicts: vnz-mednafen Replaces: vnz-mednafen Provides: gba-emulator, gbc-emulator, genesis-emulator, gg-emulator, lnx-emulator, lynx-emulator, mednafen, nes-emulator, ngc-emulator, ngp-emulator, pce-emulator, psx-emulator, sega-emulator, sgg-emulator, smd-emulator, sms-emulator, wsc-emulator Filename: i386/mednafen09_0.9.48-0_i386.deb Size: 2903176 MD5sum: 95d0a09c3476d7855934ebb1a5c90208 SHA1: f98fea0c5ea1692e2d0037d07a894b72fb41209a SHA256: 591a81dbb7b44f12b034d3a4bded86a9c8eae26af0f86d421a18070278047118 Section: otherosfs Priority: optional Homepage: http://mednafen.github.io Description: massenkoh multi emulator : NES, GBA, SNES, GBC, PSX, WSC, PCE, GG, SMS, NGP, LNX, SS Multiple systems console emulator machine for most 8bit and 16 bit console rom games, for massenkoh and VENENUX especialy optimized. . Mednafen is a command-line driven emulator for many different systems. It has full support for OpenGL and SDL graphics, network play, remappable input configuration, joystick and keyboard support, save states, game rewinding, GSF playback, and screenshots. This is the low performance version, for better graphics (but more requeriments) and more powerfully machines see hq version. . The systems supported by Mednafen are: * Atari Lynx (.lnx) * GameBoy (.gb) * GameBoy Color (.gbc) * GameBoy Advance (.gba) * Sega Game Gear (.sgg) * Sega Master System (.sms) * NeoGeo Pocket (.ngp) * NeoGeo Pocket Color (.ngc) * Nintendo Famicom (.nes) * Super Nintendo (.smc) * PC Engine, TurboGrafx 16 (.pce) * PC-FX, SuperGrafx (.pcx) * Virtual Boy (.nvb) * WonderSwan (.sws) * WonderSwan Color (.swc) * Sega Genesis / Mega Drive (.smd) * Sega Saturn (.ss) * Sony PlayStation (.psx) . Hardware emulated by Mednafen includes: * NES gamepad, Zapper, PowerPad * Four-Score, Famicom multiplayer adapter * Arkanoid, HyperShot, Space Shadow, Mahjong controllers * Oeka Kids tablet, Quiz King buzzers, Family Trainer, Barcode World * Game Genie TV mode of Sega Game Gear are not supported. Arceade and addons harware for Sega Master Systems are not yet emulated also. . U may refer to docs for more information or manpages, there is not need bios files for run rom images, only ecxeption by PC Engine CD and Lynx. Package: mednafen09 Version: 0.9.48-0 Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 22045 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.17), libgcc1 (>= 1:3.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libsdl1.2debian (>= 1.2.11), libsndfile1 (>= 1.0.20), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.3.4) Recommends: emulators-launchers-essencials, mime-support, shared-mime-info (= 0.71-4vnz1) | shared-mime-info (= 0.90-1vnz1) Suggests: mednafen-bioses, mednafen-server, mednafen08, mednaffe09 | mednaffe Conflicts: vnz-mednafen Replaces: vnz-mednafen Provides: gba-emulator, gbc-emulator, genesis-emulator, gg-emulator, lnx-emulator, lynx-emulator, mednafen, nes-emulator, ngc-emulator, ngp-emulator, pce-emulator, psx-emulator, sega-emulator, sgg-emulator, smd-emulator, sms-emulator, wsc-emulator Filename: amd64/mednafen09_0.9.48-0_amd64.deb Size: 4416844 MD5sum: 96963d4223a2c2b5d5f2d870497cd55d SHA1: f5bc181c1a7d49b5d8fdbaf227d14abe48b2f565 SHA256: eb38c28abbb5689268546735f2f4bdd7369056855fa9549ea5ece90ef75c52a8 Section: otherosfs Priority: optional Homepage: http://mednafen.github.io Description: massenkoh multi emulator : NES, GBA, SNES, GBC, PSX, WSC, PCE, GG, SMS, NGP, LNX, SS Multiple systems console emulator machine for most 8bit and 16 bit console rom games, for massenkoh and VENENUX especialy optimized. . Mednafen is a command-line driven emulator for many different systems. It has full support for OpenGL and SDL graphics, network play, remappable input configuration, joystick and keyboard support, save states, game rewinding, GSF playback, and screenshots. This is the low performance version, for better graphics (but more requeriments) and more powerfully machines see hq version. . The systems supported by Mednafen are: * Atari Lynx (.lnx) * GameBoy (.gb) * GameBoy Color (.gbc) * GameBoy Advance (.gba) * Sega Game Gear (.sgg) * Sega Master System (.sms) * NeoGeo Pocket (.ngp) * NeoGeo Pocket Color (.ngc) * Nintendo Famicom (.nes) * Super Nintendo (.smc) * PC Engine, TurboGrafx 16 (.pce) * PC-FX, SuperGrafx (.pcx) * Virtual Boy (.nvb) * WonderSwan (.sws) * WonderSwan Color (.swc) * Sega Genesis / Mega Drive (.smd) * Sega Saturn (.ss) * Sony PlayStation (.psx) . Hardware emulated by Mednafen includes: * NES gamepad, Zapper, PowerPad * Four-Score, Famicom multiplayer adapter * Arkanoid, HyperShot, Space Shadow, Mahjong controllers * Oeka Kids tablet, Quiz King buzzers, Family Trainer, Barcode World * Game Genie TV mode of Sega Game Gear are not supported. Arceade and addons harware for Sega Master Systems are not yet emulated also. . U may refer to docs for more information or manpages, there is not need bios files for run rom images, only ecxeption by PC Engine CD and Lynx. Package: mednafen09-dbgsym Source: mednafen09 Version: 0.9.48-0 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 768 Depends: mednafen09 (= 0.9.48-0) Filename: i386/mednafen09-dbgsym_0.9.48-0_i386.deb Size: 169168 MD5sum: fdb4f0958c4c2d4d37430689b7a422ef SHA1: a8ef95b50a3fa72d0d054d0062b026db15d817e1 SHA256: a5c1ee16996a15e4a55acd62eaf911774137ece73554f67d821aca61599fb0b2 Section: debug Priority: extra Homepage: http://mednafen.github.io Description: Debug symbols for mednafen09 Build-Ids: 3156858c2dd99a5e27a1a843b06f435f3855ea29 Package: mednafen09-dbgsym Source: mednafen09 Version: 0.9.48-0 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 1889 Depends: mednafen09 (= 0.9.48-0) Filename: amd64/mednafen09-dbgsym_0.9.48-0_amd64.deb Size: 242910 MD5sum: 48447483f68306ac630799d538f5492d SHA1: be437a81271a0d0982a19867f23f43204419b56a SHA256: f7beb0cfa3f910077d53f49342850bf380574f7794fa2791cab56faebd8111db Section: debug Priority: extra Homepage: http://mednafen.github.io Description: Debug symbols for mednafen09 Build-Ids: eaf4ba2ed09297fcde31025d0c1bd0725f4ad36b Package: minetest Version: 0.4.16.0-1vnz1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 6702 Depends: minetest-data (= 0.4.16.0-1vnz1), libbz2-1.0, libc6 (>= 2.3.6-6~), libcurl3-gnutls (>= 7.16.2), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:4.2), libgl1-mesa-glx | libgl1, libglu1-mesa | libglu1, libirrlicht1.8, libjpeg62-turbo, libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libogg0 (>= 1.0rc3), libopenal1 (>= 1.14), libpng16-16 (>= 1.6.2-1), libpq5 (>= 9.1~), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.2.0), libx11-6, libxext6, libxxf86vm1, zlib1g (>= 1:1.1.4) Suggests: minetest-mod-moreblocks, minetest-mod-moreores, minetest-mod-pipeworks, minetest-server Conflicts: minetestc55 Filename: i386/minetest_0.4.16.0-1vnz1_i386.deb Size: 2070924 MD5sum: 507fcd3865189290d14742cb3f538cf1 SHA1: c6529e46ffd9501efb4b53f9e0e7d6fd8dde685c SHA256: c6db729ded83d7e45dc80209baab3caebd551435da050ae0d4ce9bd433c5a6df Section: games Priority: extra Homepage: http://minetest.net/ Description: Multiplayer infinite-world block sandbox Minetest is a minecraft-inspired game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. Package: minetest Version: 0.4.16.0-1vnz1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 6411 Depends: minetest-data (= 0.4.16.0-1vnz1), libbz2-1.0, libc6 (>= 2.14), libcurl3-gnutls (>= 7.16.2), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:3.0), libgl1-mesa-glx | libgl1, libglu1-mesa | libglu1, libirrlicht1.8, libjpeg62-turbo, libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libogg0 (>= 1.0rc3), libopenal1 (>= 1.14), libpng16-16 (>= 1.6.2-1), libpq5 (>= 9.1~), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.2.0), libx11-6, libxext6, libxxf86vm1, zlib1g (>= 1:1.1.4) Suggests: minetest-mod-moreblocks, minetest-mod-moreores, minetest-mod-pipeworks, minetest-server Conflicts: minetestc55 Filename: amd64/minetest_0.4.16.0-1vnz1_amd64.deb Size: 2019042 MD5sum: 7efa3e7b111414362951d688afb050eb SHA1: 05648f59e88fdfa31ac036539031e59faa83acba SHA256: ad419dd567f1d254b8cd79e81d2331b5b9840df5bf86c0bc42631ac2d9baca27 Section: games Priority: extra Homepage: http://minetest.net/ Description: Multiplayer infinite-world block sandbox Minetest is a minecraft-inspired game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. Package: minetest-data Source: minetest Version: 0.4.16.0-1vnz1 Architecture: all Maintainer: Debian Games Team Installed-Size: 11538 Depends: fonts-croscore | fonts-liberation, fonts-droid-fallback | fonts-liberation, python, python-imaging Conflicts: minetest-common Breaks: minetest (<< 0.4.14+repack-1), minetest-common Replaces: minetest (<< 0.4.14+repack-1), minetest-common Filename: all/minetest-data_0.4.16.0-1vnz1_all.deb Size: 3482192 MD5sum: 8b809a6270d90e3eda4568a547ae0c13 SHA1: 8b0c1a2f4730200ee90d6867c3547f2a1b323f07 SHA256: 7a25c09e77ad907e2950066cfb9774950fcaf9917fc5eb861ad665273e933950 Section: games Priority: extra Homepage: http://minetest.net/ Description: Multiplayer infinite-world block sandbox (data files) Minetest is a minecraft-inspired game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . These are the files used by both client and server packages, such as the textures and other graphical files and the standard mods. Package: minetest-dbgsym Source: minetest Version: 0.4.16.0-1vnz1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian Games Team Installed-Size: 727 Depends: minetest (= 0.4.16.0-1vnz1) Filename: i386/minetest-dbgsym_0.4.16.0-1vnz1_i386.deb Size: 145978 MD5sum: c75bff6451e700f89843f97b529cb885 SHA1: 7ef5952fde174f86448583735a5c582b021104f0 SHA256: 7102aa2cb680c9e2bfcb8eb0d7a628c7910937125cab1f3fe016e255afafddf0 Section: debug Priority: extra Homepage: http://minetest.net/ Description: Debug symbols for minetest Build-Ids: b551457dc1b3cb3a89f566bf78c1ba7a59ef216c Package: minetest-dbgsym Source: minetest Version: 0.4.16.0-1vnz1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 813 Depends: minetest (= 0.4.16.0-1vnz1) Filename: amd64/minetest-dbgsym_0.4.16.0-1vnz1_amd64.deb Size: 148810 MD5sum: 27c28608c92d25e765feb93e1eeba3bb SHA1: 30b3385ecfd8c80d23a061cc99843d5b470556a2 SHA256: 1bac6044766139b6ba4f7e4fa371f2d3cd1f5f706640cd437a06b65e18555975 Section: debug Priority: extra Homepage: http://minetest.net/ Description: Debug symbols for minetest Build-Ids: 8800fdb22be44d2ebd7815df3d39c395575918ff Package: minetest-server Source: minetest Version: 0.4.16.0-1vnz1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 4579 Depends: adduser, lsb-base (>= 3.0-6), minetest-data (= 0.4.16.0-1vnz1), libc6 (>= 2.3.6-6~), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:4.2), libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libpq5 (>= 9.1~), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), zlib1g (>= 1:1.1.4) Filename: i386/minetest-server_0.4.16.0-1vnz1_i386.deb Size: 1410478 MD5sum: a3ac9900d601c8448e3a68cde4ed65d5 SHA1: 0c8e7fff3937b5542f4dc0be8fd7e515b9cb0ece SHA256: 61b7d0b425f3a392adadf8cbd2a2abb19916c8f6975fbcb2a88d0c5c2d8277c6 Section: games Priority: extra Homepage: http://minetest.net/ Description: Multiplayer infinite-world block sandbox (server) Minetest is a minecraft-inspired game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . This is the minetest server package. Package: minetest-server Source: minetest Version: 0.4.16.0-1vnz1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 4268 Depends: adduser, lsb-base (>= 3.0-6), minetest-data (= 0.4.16.0-1vnz1), libc6 (>= 2.14), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:3.0), libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libpq5 (>= 9.1~), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), zlib1g (>= 1:1.1.4) Filename: amd64/minetest-server_0.4.16.0-1vnz1_amd64.deb Size: 1349670 MD5sum: 3d3a4793335aaf6e351d4b465b933a47 SHA1: c961c06d0516fc7aa8a1bbff88605a5afec29bdd SHA256: bf35c5db5cb5fdc0fbaafe71afb3a58eed619d88bc3b7b197cd131e9f9824cdc Section: games Priority: extra Homepage: http://minetest.net/ Description: Multiplayer infinite-world block sandbox (server) Minetest is a minecraft-inspired game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . This is the minetest server package. Package: minetest-server-dbgsym Source: minetest Version: 0.4.16.0-1vnz1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian Games Team Installed-Size: 475 Depends: minetest-server (= 0.4.16.0-1vnz1) Filename: i386/minetest-server-dbgsym_0.4.16.0-1vnz1_i386.deb Size: 97940 MD5sum: 1f6b7b0154e09c753649a86abd28262b SHA1: 93c74d6e90818ac326b4f8cf51d974c014c76f88 SHA256: 8fcd6cc57613ac3ae2b1992cb039d1455f48cfeb2f2b4a510d57d448cdafdd67 Section: debug Priority: extra Homepage: http://minetest.net/ Description: Debug symbols for minetest-server Build-Ids: 24ddda061bc96377aae29243210664eebf9cd48f Package: minetest-server-dbgsym Source: minetest Version: 0.4.16.0-1vnz1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 533 Depends: minetest-server (= 0.4.16.0-1vnz1) Filename: amd64/minetest-server-dbgsym_0.4.16.0-1vnz1_amd64.deb Size: 99764 MD5sum: 21b679a8138c51be1a412b7fe210af0a SHA1: 49c17141946f54fe34b80845fb0ae65fbd51663d SHA256: 55aca0252a1d23c7aca435b6d12c01c6154a673c217f9ca2e1dc570c0e2364cf Section: debug Priority: extra Homepage: http://minetest.net/ Description: Debug symbols for minetest-server Build-Ids: d2c5b77e2c6aac202cb10b59f4e10dbfe00bfd40 Package: multicraft Version: 2.0.3-1 Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 6792 Depends: multicraft-data (= 2.0.3-1), libbz2-1.0, libc6 (>= 2.15), libcurl3-gnutls (>= 7.16.2), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:4.2), libgl1-mesa-glx | libgl1, libglu1-mesa | libglu1, libgmp10, libirrlicht1.8, libjpeg62-turbo, libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libncurses5 (>= 6), libogg0 (>= 1.0rc3), libopenal1 (>= 1.14), libpng16-16 (>= 1.6.2-1), libspatialindex4, libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), libtinfo5 (>= 6), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.2.0), libx11-6, libxext6, libxxf86vm1, zlib1g (>= 1:1.1.4) Recommends: minetest-game | multicraft-game | minetest-game-minenux Filename: i386/multicraft_2.0.3-1_i386.deb Size: 2977002 MD5sum: aa748236063186aee869242b48fb19db SHA1: c730fd86c17664299df727952bf4047a3756fa6e SHA256: 4d5cb1e16de6d74d3a8b292148a1b8674d34313d5442a424d442f875a244551f Section: games Priority: optional Homepage: https://www.multicraft.world/ Description: minetest voxel game engine with easy modding and game creation Multicraft is a fork from minetest, a voxel game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . This is the graphics player client with multiprotocol for any minetest engine, the textures and other graphical files and the standard mods. Use this to play as singleplayer or to connect to play in multiplayer modes. . This multicraft features and permit to use and serve to both older and newer minetest games Package: multicraft Version: 2.0.3-1 Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 6534 Depends: multicraft-data (= 2.0.3-1), libbz2-1.0, libc6 (>= 2.15), libcurl3-gnutls (>= 7.16.2), libfreetype6 (>= 2.2.1), libgcc1 (>= 1:3.0), libgl1-mesa-glx | libgl1, libglu1-mesa | libglu1, libgmp10, libirrlicht1.8, libjpeg62-turbo, libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libncurses5 (>= 6), libogg0 (>= 1.0rc3), libopenal1 (>= 1.14), libpng16-16 (>= 1.6.2-1), libspatialindex4, libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), libtinfo5 (>= 6), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.2.0), libx11-6, libxext6, libxxf86vm1, zlib1g (>= 1:1.1.4) Recommends: minetest-game | multicraft-game | minetest-game-minenux Filename: amd64/multicraft_2.0.3-1_amd64.deb Size: 2785872 MD5sum: d7d358a22edbb0d229fc160268d7859f SHA1: 2839b7264bed937728e5c80c26f00cbb27817674 SHA256: 2667ddb42a1fdc9cb35400e2b8beefd7fc877957e05a7ca7d0b82d1db77162dc Section: games Priority: optional Homepage: https://www.multicraft.world/ Description: minetest voxel game engine with easy modding and game creation Multicraft is a fork from minetest, a voxel game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . This is the graphics player client with multiprotocol for any minetest engine, the textures and other graphical files and the standard mods. Use this to play as singleplayer or to connect to play in multiplayer modes. . This multicraft features and permit to use and serve to both older and newer minetest games Package: multicraft-data Source: multicraft Version: 2.0.3-1 Architecture: all Maintainer: PICCORO Lenz McKAY Installed-Size: 15830 Depends: adduser Provides: multicraft-game, multicraft-game-minimal Filename: all/multicraft-data_2.0.3-1_all.deb Size: 6926890 MD5sum: 91cb80b870bfae58b4afd0cbb1881d45 SHA1: ae78a13c50e42e35942c44cda60e75b5f35b3f25 SHA256: ec2deb3d49c10493bd85575dd29d5eddd2e42e2faa8d3673513cbb6845acb010 Section: games Priority: optional Homepage: https://www.multicraft.world/ Description: voxel game engine based on minetest - shared common data files Multicraft is a fork from minetest, a voxel game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . These are the shared data files for both server and client programs, such as the textures and other graphical files and the standard mods. Use this to provide and deploy a service where players can connect over a network. . This multicraft features and permit to use and serve to both older and newer minetest games Package: multicraft-dbgsym Source: multicraft Version: 2.0.3-1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 39558 Depends: multicraft (= 2.0.3-1) Filename: i386/multicraft-dbgsym_2.0.3-1_i386.deb Size: 39638178 MD5sum: b205339084fa90aba720dfa60d5b7e0f SHA1: 17d7d630ff442212d09c7a917a9ed250e89b87d0 SHA256: dcfa94a6cc9e0cb07ac5501a5c788c378d0dc8d71730e142e2762fdfb2e6d4ca Section: debug Priority: extra Homepage: https://www.multicraft.world/ Description: Debug symbols for multicraft Build-Ids: 6e518c540dd4ce634612421d443169b106f3ab09 Package: multicraft-dbgsym Source: multicraft Version: 2.0.3-1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 40392 Depends: multicraft (= 2.0.3-1) Filename: amd64/multicraft-dbgsym_2.0.3-1_amd64.deb Size: 40327812 MD5sum: f92d91ad632c7f5c43ede0a596644677 SHA1: 06220f1a0230a0fd4dff58e90e6e35edb48c526e SHA256: baf8fca743f508db72cab9b959ef98056f58a7d37c287d555c9f39036688e269 Section: debug Priority: extra Homepage: https://www.multicraft.world/ Description: Debug symbols for multicraft Build-Ids: e258f6740edba9eee55c98331bd8756bd001df30 Package: multicraft-server Source: multicraft Version: 2.0.3-1 Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 4299 Depends: multicraft-data (= 2.0.3-1), adduser, lsb-base (>= 3.0-6), libc6 (>= 2.15), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:4.2), libgmp10, libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libncurses5 (>= 6), libspatialindex4, libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), libtinfo5 (>= 6), zlib1g (>= 1:1.1.4) Recommends: minetest-game | multicraft-game | minetest-game-minenux Provides: minetest-server Filename: i386/multicraft-server_2.0.3-1_i386.deb Size: 1849908 MD5sum: 243ac5a4384a6cf51d98047732b6fe83 SHA1: 4f191c32cb7d46f16cbc278941db7c466b8cd71d SHA256: 8ded94488a1ece7e70b8a8ef7fb452423c9ce056dced21b1b40a276b03682480 Section: games Priority: optional Homepage: https://www.multicraft.world/ Description: voxel game engine based on minetest - server multiplayer Multicraft is a fork from minetest, a voxel game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . These are the server flavour with multiprotocol for any minetest engine, such as the textures and other graphical files and the standard mods. Use this to provide and deploy a service where players can connect over a network. . This multicraft features and permit to use and serve to both older and newer minetest games Package: multicraft-server Source: multicraft Version: 2.0.3-1 Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 4033 Depends: multicraft-data (= 2.0.3-1), adduser, lsb-base (>= 3.0-6), libc6 (>= 2.15), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:3.0), libgmp10, libjsoncpp1 (>= 1.7.4), libleveldb1v5, libluajit-5.1-2, libncurses5 (>= 6), libspatialindex4, libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 6), libtinfo5 (>= 6), zlib1g (>= 1:1.1.4) Recommends: minetest-game | multicraft-game | minetest-game-minenux Provides: minetest-server Filename: amd64/multicraft-server_2.0.3-1_amd64.deb Size: 1707840 MD5sum: 195e29f452df7447858e34e292e5153d SHA1: 59b2015cec459e5abc7443494d933005674bc2e7 SHA256: f0a84fec74755af2af64af7382713aff99ac15ee2804333cfb5d71b9b87e62c4 Section: games Priority: optional Homepage: https://www.multicraft.world/ Description: voxel game engine based on minetest - server multiplayer Multicraft is a fork from minetest, a voxel game written from scratch and licensed under the LGPL (version 2.1 or later). It supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. . These are the server flavour with multiprotocol for any minetest engine, such as the textures and other graphical files and the standard mods. Use this to provide and deploy a service where players can connect over a network. . This multicraft features and permit to use and serve to both older and newer minetest games Package: multicraft-server-dbgsym Source: multicraft Version: 2.0.3-1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 23080 Depends: multicraft-server (= 2.0.3-1) Filename: i386/multicraft-server-dbgsym_2.0.3-1_i386.deb Size: 23074622 MD5sum: 2bfc13cf167f9c8291781cac03f1ba33 SHA1: a472f2f05128c868b14c2ee575c2474516e69880 SHA256: ae0971dda3da0518ecff2f1afbf1dc8e4c7cd7fdac0041c3c2a09a0f0b09fb91 Section: debug Priority: extra Homepage: https://www.multicraft.world/ Description: Debug symbols for multicraft-server Build-Ids: 3d196bd5ade880963505a8ab34f15244a7d2cf60 Package: multicraft-server-dbgsym Source: multicraft Version: 2.0.3-1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 23576 Depends: multicraft-server (= 2.0.3-1) Filename: amd64/multicraft-server-dbgsym_2.0.3-1_amd64.deb Size: 23462304 MD5sum: 1d13c49be8d853b271a205626110bdfc SHA1: bab8165b89e93906f2d8e006b634bdcb6082ed85 SHA256: e5d6c75b349390a3175f0e2614860888f40946be6fac71728e344295a48312de Section: debug Priority: extra Homepage: https://www.multicraft.world/ Description: Debug symbols for multicraft-server Build-Ids: 1ad51d9381c4ebd86484af908774fda3d0e9e6aa Package: openal-info Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 40 Depends: libopenal1 (= 1:1.17.2-5vnz1), libc6 (>= 2.3.6-6~), libsndio6.1 (>= 1.1.0) Breaks: libopenal-dev-bin (<< 1:1.15.1-5~) Replaces: libopenal-dev-bin (<< 1:1.15.1-5~) Filename: i386/openal-info_1.17.2-5vnz1_i386.deb Size: 16030 MD5sum: 555bb2a90c3565ee5202da84f69b9ebe SHA1: ace1c4b873bebac5197b8a486cda4d3ffad85750 SHA256: 9f109f301358422c879da21fd8bb99df14318d023a606adb4b3e153b50e47d14 Section: sound Priority: optional Multi-Arch: allowed Homepage: http://kcat.strangesoft.net/openal.html Description: Informational utility for the OpenAL audio API This utility is useful in diagnosing OpenAL related issues and for displaying helpful informationa about what is supported on your system with OpenAL. . This package installs the OpenAL Soft openal-info utility. Package: openal-info Source: openal-soft Version: 1:1.17.2-5vnz1 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 40 Depends: libopenal1 (= 1:1.17.2-5vnz1), libc6 (>= 2.3.4), libsndio6.1 (>= 1.1.0) Breaks: libopenal-dev-bin (<< 1:1.15.1-5~) Replaces: libopenal-dev-bin (<< 1:1.15.1-5~) Filename: amd64/openal-info_1.17.2-5vnz1_amd64.deb Size: 15674 MD5sum: 30a3b57a5ce1467a4aec2154ebc80c64 SHA1: cfbe3adcff19ee62fd9a341419eae69725093a2a SHA256: 7cea0fd6fbb98c16051241d2a93bc59c3701b91fa5bbd1d671c2ab092af410cf Section: sound Priority: optional Multi-Arch: allowed Homepage: http://kcat.strangesoft.net/openal.html Description: Informational utility for the OpenAL audio API This utility is useful in diagnosing OpenAL related issues and for displaying helpful informationa about what is supported on your system with OpenAL. . This package installs the OpenAL Soft openal-info utility. Package: openal-info-dbgsym Source: openal-soft Version: 1:1.17.2-5vnz1 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian Games Team Installed-Size: 22 Depends: openal-info (= 1:1.17.2-5vnz1) Filename: i386/openal-info-dbgsym_1.17.2-5vnz1_i386.deb Size: 9064 MD5sum: 05670b3d7302f815821e415872b8f04f SHA1: 5d4d763054f9e5a67d221a4b9758315668529572 SHA256: 3272170a7fd9e02274250a063f5cf0b5e5f0cd732359af85bd45af364e2e7394 Section: debug Priority: extra Homepage: http://kcat.strangesoft.net/openal.html Description: Debug symbols for openal-info Build-Ids: d5854546732e8ef80cef940f23bac2da9b758538 Package: openal-info-dbgsym Source: openal-soft Version: 1:1.17.2-5vnz1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 24 Depends: openal-info (= 1:1.17.2-5vnz1) Filename: amd64/openal-info-dbgsym_1.17.2-5vnz1_amd64.deb Size: 9648 MD5sum: 5e5ea74fa1922cba80206ffcdfb95034 SHA1: b64a3b7bad5424f6c5f03c86b3bb9e4d2e1f7b46 SHA256: 6d74ed68f22ecf07aef2242e8f882f9fd9629e1dcd99eaa7dd9a3b0fd788077d Section: debug Priority: extra Homepage: http://kcat.strangesoft.net/openal.html Description: Debug symbols for openal-info Build-Ids: fd875cf5f6152d71be1669ce94788a51afb3146e Package: quakespasm Version: 0.92.1+dfsg-4 Architecture: i386 Maintainer: Debian Games Team Installed-Size: 1434 Depends: libc6 (>= 2.7), libflac8 (>= 1.3.0), libgl1-mesa-glx | libgl1, libmad0 (>= 0.15.1b-3), libmikmod3 (>= 3.3.3), libopusfile0, libsdl2-2.0-0 (>= 2.0.4), libvorbisfile3 (>= 1.1.2) Suggests: quake, quake-armagon, quake-disolution, quake-music-pack Provides: quake-engine, quake-engine-lanserver, quake-engine-server Filename: i386/quakespasm_0.92.1+dfsg-4_i386.deb Size: 453478 MD5sum: 2616a5b00d543da224cca780ede48399 SHA1: 651bcd4f43030ecdd5036b97f7554db0ca12fd62 SHA256: 8067b86cc2dc0c31b6aae0f456b6213c79361ebac5615da4fff67f4c6a7370c4 Section: games Priority: optional Homepage: http://quakespasm.sourceforge.net/ Description: Quake 1 engine for iD software's Quake 3d game QuakeSpasm is a Unix-friendly Quake engine based on the SDL port of the popular FitzQuake. It includes some new features, important fixes, and aims for portability and correctness. . This package contains no data files. To use it, you will need to either install the commercial Quake data, or alternative free data files such as OpenQuartz. . This engine is typically used via a script that launches it with a particular data set, such as the one found in the "quake" package. Package: quakespasm Version: 0.92.1+dfsg-4 Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 1369 Depends: libc6 (>= 2.14), libflac8 (>= 1.3.0), libgl1-mesa-glx | libgl1, libmad0 (>= 0.15.1b-3), libmikmod3 (>= 3.3.3), libopusfile0, libsdl2-2.0-0 (>= 2.0.4), libvorbisfile3 (>= 1.1.2) Suggests: quake, quake-armagon, quake-disolution, quake-music-pack Provides: quake-engine, quake-engine-lanserver, quake-engine-server Filename: amd64/quakespasm_0.92.1+dfsg-4_amd64.deb Size: 456102 MD5sum: 1ea87beb3e05e3b68fa1f6a6214cabf8 SHA1: f38887bcb48498d2fff520f2445701f2bfb4bd65 SHA256: 9d903a8c29726a956e4f63cf15a0c64a73463a5393adca0be328b7422ac346e0 Section: games Priority: optional Homepage: http://quakespasm.sourceforge.net/ Description: Quake 1 engine for iD software's Quake 3d game QuakeSpasm is a Unix-friendly Quake engine based on the SDL port of the popular FitzQuake. It includes some new features, important fixes, and aims for portability and correctness. . This package contains no data files. To use it, you will need to either install the commercial Quake data, or alternative free data files such as OpenQuartz. . This engine is typically used via a script that launches it with a particular data set, such as the one found in the "quake" package. Package: quakespasm-dbgsym Source: quakespasm Version: 0.92.1+dfsg-4 Auto-Built-Package: debug-symbols Architecture: i386 Maintainer: Debian Games Team Installed-Size: 101 Depends: quakespasm (= 0.92.1+dfsg-4) Breaks: quakespasm-dbg (<< 0.90.1+dfsg-2~) Replaces: quakespasm-dbg (<< 0.90.1+dfsg-2~) Filename: i386/quakespasm-dbgsym_0.92.1+dfsg-4_i386.deb Size: 32676 MD5sum: d617edd5b04ca65e8834146dee39084f SHA1: c76785ac0e41f315c4f7a775f167ae3b4f9915f0 SHA256: 7736374e73d97b32adc00239233929f2597561eafe988cf67d6d5d9df76c9315 Section: debug Priority: extra Homepage: http://quakespasm.sourceforge.net/ Description: Debug symbols for quakespasm Build-Ids: f60507063927fde7f0a0f62c06e68dd3b9d7d75f Package: quakespasm-dbgsym Source: quakespasm Version: 0.92.1+dfsg-4 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Games Team Installed-Size: 117 Depends: quakespasm (= 0.92.1+dfsg-4) Breaks: quakespasm-dbg (<< 0.90.1+dfsg-2~) Replaces: quakespasm-dbg (<< 0.90.1+dfsg-2~) Filename: amd64/quakespasm-dbgsym_0.92.1+dfsg-4_amd64.deb Size: 31860 MD5sum: d0b63ef56471ba334b5b854ccaa071a8 SHA1: 06efcaec2739137780e40a5555cee75ea6d20075 SHA256: 11714d4ecfd7b4f319b10ef504a7d6da73d4185175e54bd14d12915b593a4fea Section: debug Priority: extra Homepage: http://quakespasm.sourceforge.net/ Description: Debug symbols for quakespasm Build-Ids: bdebc63d2fbe2c52163d00f98d12b1dd8365699f