Package: cmake Version: 3.29.6-54.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 44107 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1) Replaces: cmake (<= 3.29.6-54.1), cmake-data Filename: amd64/cmake_3.29.6-54.1_amd64.deb Size: 13514490 MD5sum: 6c194908ea656cb9a6bba7fb40bfb721 SHA1: 50d1505d82fb14d70a504ba2ab149fd3ca6af869 SHA256: 0596c253f0735156b8506fe188e526a6131a307b724634b71d74bb6da5565f7e Section: devel Priority: optional Description: Cross-platform make system. CMake is a cross-platform build system. Package: fluidsynth Version: 2.3.5-44.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 47 Depends: libfluidsynth3 (>= 2.3.5-44.1), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.12.0) Filename: amd64/fluidsynth_2.3.5-44.1_amd64.deb Size: 15050 MD5sum: 1e97371901f5e9b84234395994c5ef9b SHA1: e365e1a05de2497b3dffeaf5da54dd644eba0497 SHA256: 5f24ca9e84b01134f7ed15ade56f6e73cf1363361e4d0f59b520d8e46bb92e3f Section: sound Priority: optional Description: FluidSynth is a real-time software synthesizer FluidSynth is a real-time software synthesizer based on the SoundFont 2 specifications. . This package contains the command-line utilities. Package: gigtools Source: libgig Version: 4.4.1-34.1 Architecture: amd64 Maintainer: Matt Flax Installed-Size: 615 Depends: libgig10 (>= 4.4.1-34.1), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgig11, libsndfile1 (>= 1.0.20), libstdc++6 (>= 13.1) Filename: amd64/gigtools_4.4.1-34.1_amd64.deb Size: 170354 MD5sum: ada11163e5b8cd8b144ce550219dbca9 SHA1: a5f5a05a24383d63598342b21b6de787a90b8fee SHA256: a2a964b2d9787ed484577b8b80aafab49620c4ec86dea8d0e331744a2478095b Section: utils Priority: optional Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - utilities Raw file handling for audio sampler files based on either DLS Level 1/2, Gigasampler / GigaStudio, SoundFont version 2 and KORG sound format (.KSF and .KMP). These files are typically used in modern day audio waveform samplers and synthesizer keyboards. . There are also tools for reading Akai formated medias (CDRoms, HDs, Zip disks). Currently Akai S1000, S01, S2000 and S3000 series are supported. . This package contains the following command line tools: . gigdump: Prints out the content of a .gig file. gigextract: Extracts audio samples from a .gig file. gigmerge: Combines multiple .gig files to one .gig file. gig2mono: Converts .gig files from stereo to mono. gig2stereo: Converts .gig files to true interleaved stereo sounds. dlsdump: Prints out the content of a DLS file. rifftree: Prints out the RIFF tree of an arbitrary RIFF container file. sf2dump: Prints out the content of a .sf2 file. sf2extract: Extracts audio samples from a .sf2 file. korgdump: Prints out the content of KORG sound files (.KSF, .KMP). korg2gig: Converts KORG (.KSF, .KMP) sound files to GigaStudio (.gig) files. akaidump: Dump an AKAI media i.e. from a CDROM drive as disk image file to your HD. akaiextract: Extracts audio samples from an AKAI media or from an AKAI disk image file. Package: libfluidsynth-dev Source: fluidsynth Version: 2.3.5-44.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 192 Depends: libfluidsynth3 (>= 2.3.5-44.1) Filename: amd64/libfluidsynth-dev_2.3.5-44.1_amd64.deb Size: 65756 MD5sum: 8dfa7aad9b23c913c07331564cf3d876 SHA1: 802e73a291a73b853ce4469f45217146ccc83ce4 SHA256: 1bc549217100bb64b872a9cd69c6e24f6743298bd03026bbd97611da461f5322 Section: libdevel Priority: optional Description: FluidSynth is a real-time software synthesizer FluidSynth is a real-time software synthesizer based on the SoundFont 2 specifications. . This package contains the header file required for compiling hosts and plugins. Package: libfluidsynth3 Source: fluidsynth Version: 2.3.5-44.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 425 Depends: libasound2t64 (>= 1.0.16), libc6 (>= 2.33), libglib2.0-0t64 (>= 2.32.0), libgomp1 (>= 4.9), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libpulse0 (>= 0.99.1), libsndfile1 (>= 1.0.20), libstdc++6 (>= 11) Replaces: libfluidsynth2 (<= 2.3.5-44.1) Filename: amd64/libfluidsynth3_2.3.5-44.1_amd64.deb Size: 189790 MD5sum: f96dea8fe287cf7269da77a698ea65b1 SHA1: 76ddf5ef4cdca29d9b546ef29b79421bc3e7997d SHA256: 5348f86a53acb39e35ee1d206553cbb5aef93e2ec41cd3f7fa6a6cf9947c28a4 Section: libs Priority: optional Description: FluidSynth is a real-time software synthesizer FluidSynth is a real-time software synthesizer based on the SoundFont 2 specifications. Package: libgig-dev Source: libgig Version: 4.4.1-34.1 Architecture: amd64 Maintainer: Matt Flax Installed-Size: 1737 Depends: libgig11 (>= 4.4.1-34.1) Filename: amd64/libgig-dev_4.4.1-34.1_amd64.deb Size: 314460 MD5sum: ae0911a4fbe50592ba484f20b2feb24d SHA1: 697ad077463732fef3517456ef4dd99c3b32431b SHA256: 2dab055fa7a26de7a33c45521753591e44a5578e69826e3e013e0b450a9f32f7 Section: libdevel Priority: optional Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - development files libgig is a C++ library for reading, modifying and creating Gigasampler / GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont version 2 (.sf2) and KORG sound files (.KMP and .KSF). These files are typically used in modern day audio waveform samplers and synthesizer keyboards. . Since the Gigasampler / GigaStudio and DLS formats are based ontop of the binary RIFF container format, this library also provides convenient access to RIFF files in general. . This package also contains a Linux/POSIX ported version of libakai, which provides support for reading Akai formated medias (CDRoms, HDs, Zip disks). Currently Akai S1000, S01, S2000 and S3000 series are supported. . For more information visit http://www.linuxsampler.org/libgig/ . This package contains the header files needed for development with libgig. You will need this only if you intend to compile programs that use this library. Package: libgig11 Source: libgig Version: 4.4.1-34.1 Architecture: amd64 Maintainer: Matt Flax Installed-Size: 729 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), libuuid1 (>= 2.16) Conflicts: libgig, libgig10, libgig3c2, libgig6, libgig7, libgig8, libgig9 Replaces: libgig, libgig10, libgig3c2, libgig6, libgig7, libgig8, libgig9 Filename: amd64/libgig11_4.4.1-34.1_amd64.deb Size: 236052 MD5sum: 3f5bb68bbcc8502e2f0aea89039913c7 SHA1: 2d1267afb0fc9438f720902914364ead78367ae7 SHA256: bb918e8c3036d33e65ed86daf7784afd51aee1d032fd551bf506b0da6f77c263 Section: libs Priority: optional Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files libgig is a C++ library for reading, modifying and creating Gigasampler / GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont version 2 (.sf2) files and KORG sound files (.KMP and .KSF). These files are typically used in modern day audio waveform samplers and synthesizer keyboards. . Since the Gigasampler / GigaStudio and DLS formats are based ontop of the binary RIFF container format, this library also provides convenient access to RIFF files in general. . This package also contains a Linux/POSIX ported version of libakai, which provides support for reading Akai formated medias (CDRoms, HDs, Zip disks). Currently Akai S1000, S01, S2000 and S3000 series are supported. . For more information visit http://www.linuxsampler.org/libgig/ Package: libmad0 Source: libmad Version: 0.15.1b-12.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 146 Depends: libc6 (>= 2.14) Filename: amd64/libmad0_0.15.1b-12.1_amd64.deb Size: 57264 MD5sum: d5d64967d5f4dca283c2c2b6b343026b SHA1: f056c0a8c000f9143f92063abd415e790a6173be SHA256: 7100cefd73935d5eed0224d73a639cf4eb20c6ecd1d006ba4c69728a69f891f2 Section: libs Priority: optional Description: An MPEG audio decoder library MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1 and the MPEG-2 extension to Lower Sampling Frequencies, as well as the so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are fully implemented. MAD supports high quality 24-bit PCM output for modern audio technologies. MAD computes using 100% fixed-point (integer) computation, so you can run it without a floating point unit. Package: libmad0-dev Source: libmad Version: 0.15.1b-12.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 194 Depends: libmad0 (>= 0.15.1b-12.1) Filename: amd64/libmad0-dev_0.15.1b-12.1_amd64.deb Size: 67218 MD5sum: 0f709f17e83fd3d82765a61f008b53ed SHA1: de222920d642af35b77e8451a4d34abc53faeb5b SHA256: 0df8760ce609588c249c410b9345f08712f789e7918d8ebe4d66d3cd5a9a4fa0 Section: libdevel Priority: optional Description: An MPEG audio decoder library - development files MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1 and the MPEG-2 extension to Lower Sampling Frequencies, as well as the so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are fully implemented. MAD supports high quality 24-bit PCM output for modern audio technologies. MAD computes using 100% fixed-point (integer) computation, so you can run it without a floating point unit. . This package contains headers, documentation and static libraries. Package: librubberband-dev Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 781 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/librubberband-dev_3.3.0-17.1_amd64.deb Size: 165784 MD5sum: 5ae2feac0e39699cd4d04b36a9f7bac2 SHA1: 0d9e1893b33bc5bc5f3e2d687d9df4d82d48d959 SHA256: e837d2078e96edf3bd793b693c79dd86af2b647e02c877c41a48c5ca6b145c04 Section: libdevel Priority: extra Description: An audio time-stretching and pitch-shifting library (development files) Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains development files for linking against librubberband, along with the static version of the library. API documentation is available at http://www.breakfastquay.com/rubberband/code-doc/ . Package: librubberband2 Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 327 Depends: libc6 (>= 2.34), libfftw3-double3 (>= 3.3.10), libgcc-s1 (>= 3.3.1), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 13.1) Replaces: librubberband2v5 (<= 3.3.0-17.1) Filename: amd64/librubberband2_3.3.0-17.1_amd64.deb Size: 124956 MD5sum: 406bdd9041398fa7bcdca74c7e0629db SHA1: 246c637cf43711df04e635dba4da29849eb60090 SHA256: 7ba1e9a8dbe66d4e704b9bdc55b7ca22af1d2715a6528a53167dcdd9974b6681 Section: libs Priority: extra Description: An audio time-stretching and pitch-shifting library Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. Package: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 576 Depends: librubberband2 (= 3.3.0-17.1) Replaces: rubberband-cli (<= 3.3.0-17.1) Filename: amd64/rubberband_3.3.0-17.1_amd64.deb Size: 120702 MD5sum: 9353f62b5fb87e0fae8fcfbaeac78cd4 SHA1: 4f1d6e09d2b0b2dca38de89d9e7b17ee2875fcc3 SHA256: 1980f1b8b9ea4571b4f159b6de3d177661d85bfe72589ad655b155785bcc4bc7 Section: sound Priority: extra Description: An audio time-stretching and pitch-shifting utility Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains a command-line utility that can be used to exploit Rubber Band's capabilities. Package: rubberband-ladspa Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 273 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/rubberband-ladspa_3.3.0-17.1_amd64.deb Size: 109920 MD5sum: 5d3d3911c9bbb73546884f9235d5f85e SHA1: f13e687b93be9477e663c4bcd905b6228d9cb39a SHA256: 9c00d56df9cca88bb04b08d0d35d3802ac530c48366a1815b649ca7ac81925e0 Section: sound Priority: extra Description: A LADSPA plugin for audio pitch-shifting Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains a LADSPA plugin. Package: rubberband-lv2 Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 282 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/rubberband-lv2_3.3.0-17.1_amd64.deb Size: 111698 MD5sum: 20b0f507a5fdb7c81d3e53bcdc88a095 SHA1: 93897842638383fd8250c2f4f858bb3251720eb4 SHA256: 66f2f6621f41feca03c2c057c39dfd4ddbc7591900eb92e27f186a414d8acfb2 Section: sound Priority: extra Description: A LV2 plugin for audio pitch-shifting Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains a LV2 plugin. Package: rubberband-vamp Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 282 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/rubberband-vamp_3.3.0-17.1_amd64.deb Size: 114850 MD5sum: 2e899fdb9efe0983a3cc8585f50befa0 SHA1: 4468e60cc0091f50f829b81003c48aa640a1059b SHA256: 631af6537ae7747778722f02b1599c4d100298d3ed0cd7cb00596044aa1fcd9b Section: sound Priority: extra Description: Vamp plugins using Rubber Band Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains VAMP plugins.