Package: cmake Version: 3.29.2-50.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 44096 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libssl3 (>= 3.0.0), libstdc++6 (>= 13.1) Replaces: cmake (<= 3.29.2-50.1), cmake-data Filename: amd64/cmake_3.29.2-50.1_amd64.deb Size: 13553936 MD5sum: bcd3a77f95a158f62f44ba42b0c06f6d SHA1: 062633a6d388d1d4d47ee8463baf91fb6c5a4c9d SHA256: b531bf562194a7ece545cc968c9625a9451077b1d12e2c011ca9855af2cd9401 Section: devel Priority: optional Description: Cross-platform make system. CMake is a cross-platform build system. Package: fluidsynth Version: 2.3.5-44.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 47 Depends: libfluidsynth3 (>= 2.3.5-44.1), libc6 (>= 2.34), libglib2.0-0 (>= 2.12.0) Filename: amd64/fluidsynth_2.3.5-44.1_amd64.deb Size: 15056 MD5sum: 34a7c63105b9c8cc935582d02c3c5bbe SHA1: 78edaad06139f0534467700163ebc91a74634675 SHA256: 45be11f3ceac062a7f15e308f649d1a6fed7b8646032188cf252b37fd680bc4a Section: sound Priority: optional Description: FluidSynth is a real-time software synthesizer FluidSynth is a real-time software synthesizer based on the SoundFont 2 specifications. . This package contains the command-line utilities. Package: gigtools Source: libgig Version: 4.4.1-34.1 Architecture: amd64 Maintainer: Matt Flax Installed-Size: 615 Depends: libgig10 (>= 4.4.1-34.1), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgig11, libsndfile1 (>= 1.0.20), libstdc++6 (>= 13.1) Filename: amd64/gigtools_4.4.1-34.1_amd64.deb Size: 170592 MD5sum: 2acfc153dc8ab57e6d8e1db35d9ad52b SHA1: 6f3aef6216ed7e7ed7434bfd168a4c39e5766380 SHA256: 9f6687f6c0587fc65ffc5c31237a1a420793c091b7dd2a5498111ce956518905 Section: utils Priority: optional Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - utilities Raw file handling for audio sampler files based on either DLS Level 1/2, Gigasampler / GigaStudio, SoundFont version 2 and KORG sound format (.KSF and .KMP). These files are typically used in modern day audio waveform samplers and synthesizer keyboards. . There are also tools for reading Akai formated medias (CDRoms, HDs, Zip disks). Currently Akai S1000, S01, S2000 and S3000 series are supported. . This package contains the following command line tools: . gigdump: Prints out the content of a .gig file. gigextract: Extracts audio samples from a .gig file. gigmerge: Combines multiple .gig files to one .gig file. gig2mono: Converts .gig files from stereo to mono. gig2stereo: Converts .gig files to true interleaved stereo sounds. dlsdump: Prints out the content of a DLS file. rifftree: Prints out the RIFF tree of an arbitrary RIFF container file. sf2dump: Prints out the content of a .sf2 file. sf2extract: Extracts audio samples from a .sf2 file. korgdump: Prints out the content of KORG sound files (.KSF, .KMP). korg2gig: Converts KORG (.KSF, .KMP) sound files to GigaStudio (.gig) files. akaidump: Dump an AKAI media i.e. from a CDROM drive as disk image file to your HD. akaiextract: Extracts audio samples from an AKAI media or from an AKAI disk image file. Package: libfluidsynth-dev Source: fluidsynth Version: 2.3.5-44.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 192 Depends: libfluidsynth3 (>= 2.3.5-44.1) Filename: amd64/libfluidsynth-dev_2.3.5-44.1_amd64.deb Size: 65756 MD5sum: 8dfa7aad9b23c913c07331564cf3d876 SHA1: 802e73a291a73b853ce4469f45217146ccc83ce4 SHA256: 1bc549217100bb64b872a9cd69c6e24f6743298bd03026bbd97611da461f5322 Section: libdevel Priority: optional Description: FluidSynth is a real-time software synthesizer FluidSynth is a real-time software synthesizer based on the SoundFont 2 specifications. . This package contains the header file required for compiling hosts and plugins. Package: libfluidsynth3 Source: fluidsynth Version: 2.3.5-44.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 429 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.33), libglib2.0-0 (>= 2.32.0), libgomp1 (>= 4.9), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libpulse0 (>= 0.99.1), libsndfile1 (>= 1.0.20), libstdc++6 (>= 11) Replaces: libfluidsynth2 (<= 2.3.5-44.1) Filename: amd64/libfluidsynth3_2.3.5-44.1_amd64.deb Size: 189454 MD5sum: 48cb70c5c3158c907643186a688f3815 SHA1: 9d04264431c410971b51d183a73993021653130a SHA256: 73652716d97d2901b3adf16615b41782a88895c9a342e78884937452ecaafb93 Section: libs Priority: optional Description: FluidSynth is a real-time software synthesizer FluidSynth is a real-time software synthesizer based on the SoundFont 2 specifications. Package: libgig-dev Source: libgig Version: 4.4.1-34.1 Architecture: amd64 Maintainer: Matt Flax Installed-Size: 1738 Depends: libgig11 (>= 4.4.1-34.1) Filename: amd64/libgig-dev_4.4.1-34.1_amd64.deb Size: 315090 MD5sum: f0aa91d87be71644d4ecfd66b87dba62 SHA1: 8d640b6edbf673bc50a60a198fd31b3e231bb87d SHA256: 27634e9151b20212013bfd0de7d52a35bd19690423b4954d2982ccd4108c0714 Section: libdevel Priority: optional Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - development files libgig is a C++ library for reading, modifying and creating Gigasampler / GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont version 2 (.sf2) and KORG sound files (.KMP and .KSF). These files are typically used in modern day audio waveform samplers and synthesizer keyboards. . Since the Gigasampler / GigaStudio and DLS formats are based ontop of the binary RIFF container format, this library also provides convenient access to RIFF files in general. . This package also contains a Linux/POSIX ported version of libakai, which provides support for reading Akai formated medias (CDRoms, HDs, Zip disks). Currently Akai S1000, S01, S2000 and S3000 series are supported. . For more information visit http://www.linuxsampler.org/libgig/ . This package contains the header files needed for development with libgig. You will need this only if you intend to compile programs that use this library. Package: libgig11 Source: libgig Version: 4.4.1-34.1 Architecture: amd64 Maintainer: Matt Flax Installed-Size: 733 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), libuuid1 (>= 2.16) Conflicts: libgig, libgig10, libgig3c2, libgig6, libgig7, libgig8, libgig9 Replaces: libgig, libgig10, libgig3c2, libgig6, libgig7, libgig8, libgig9 Filename: amd64/libgig11_4.4.1-34.1_amd64.deb Size: 237478 MD5sum: 0338f7568a637604049d6ac0611c4cab SHA1: 7f226e97c1cd8ad9718eee4c73d52e54c06dabce SHA256: 088585fcd883cc6936d1325709f9040611c8d9aab457ec0c14b6674d97efb265 Section: libs Priority: optional Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files libgig is a C++ library for reading, modifying and creating Gigasampler / GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont version 2 (.sf2) files and KORG sound files (.KMP and .KSF). These files are typically used in modern day audio waveform samplers and synthesizer keyboards. . Since the Gigasampler / GigaStudio and DLS formats are based ontop of the binary RIFF container format, this library also provides convenient access to RIFF files in general. . This package also contains a Linux/POSIX ported version of libakai, which provides support for reading Akai formated medias (CDRoms, HDs, Zip disks). Currently Akai S1000, S01, S2000 and S3000 series are supported. . For more information visit http://www.linuxsampler.org/libgig/ Package: libmad0 Source: libmad Version: 0.15.1b-12.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 146 Depends: libc6 (>= 2.14) Filename: amd64/libmad0_0.15.1b-12.1_amd64.deb Size: 57106 MD5sum: de60078915d0b958be5cd734ce4c2836 SHA1: e789566ce6edec1359a66877bdc56b80be5bf2a2 SHA256: 32be20731562f6a4683c4c950b2238ba05c9dc1c537ac3a1c5b8ee39f7995675 Section: libs Priority: optional Description: An MPEG audio decoder library MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1 and the MPEG-2 extension to Lower Sampling Frequencies, as well as the so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are fully implemented. MAD supports high quality 24-bit PCM output for modern audio technologies. MAD computes using 100% fixed-point (integer) computation, so you can run it without a floating point unit. Package: libmad0-dev Source: libmad Version: 0.15.1b-12.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 192 Depends: libmad0 (>= 0.15.1b-12.1) Filename: amd64/libmad0-dev_0.15.1b-12.1_amd64.deb Size: 67086 MD5sum: ca1f03227928d22d426221cb49136d79 SHA1: 2ee1366e4b107db8dd8b921e5b5303d903320f44 SHA256: 4d7ec3e0f12e26e39f0672302069964f1cc0d556e7ff774ee9769965c454d0e5 Section: libdevel Priority: optional Description: An MPEG audio decoder library - development files MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1 and the MPEG-2 extension to Lower Sampling Frequencies, as well as the so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are fully implemented. MAD supports high quality 24-bit PCM output for modern audio technologies. MAD computes using 100% fixed-point (integer) computation, so you can run it without a floating point unit. . This package contains headers, documentation and static libraries. Package: librubberband-dev Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 782 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/librubberband-dev_3.3.0-17.1_amd64.deb Size: 167188 MD5sum: d6a04bcd7cac40085a959137b50c2c8c SHA1: eeb670e30170a3768c4511b2e2d550f8945f344d SHA256: 30d7a49823ac4817fce6a688901d18b00ffdb6cb9bdb2dfddfe814ca8dfc9fd4 Section: libdevel Priority: extra Description: An audio time-stretching and pitch-shifting library (development files) Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains development files for linking against librubberband, along with the static version of the library. API documentation is available at http://www.breakfastquay.com/rubberband/code-doc/ . Package: librubberband2 Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 327 Depends: libc6 (>= 2.34), libfftw3-double3 (>= 3.3.10), libgcc-s1 (>= 3.3.1), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 13.1) Replaces: librubberband2v5 (<= 3.3.0-17.1) Filename: amd64/librubberband2_3.3.0-17.1_amd64.deb Size: 126304 MD5sum: 5064791efaccd4b169d304f78c671f30 SHA1: 67fdee7d0c8545b131f19be607a4d12a6216ee78 SHA256: 5908508cd09c917d2b912b9aa480f9753ff9a65713c5100db25677d6833ef422 Section: libs Priority: extra Description: An audio time-stretching and pitch-shifting library Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. Package: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 576 Depends: librubberband2 (= 3.3.0-17.1) Replaces: rubberband-cli (<= 3.3.0-17.1) Filename: amd64/rubberband_3.3.0-17.1_amd64.deb Size: 120608 MD5sum: e0c5013970390c8374d3e50043115639 SHA1: cdf0c814a8a025afa4ce8b90ac75504f0889f540 SHA256: a094d5411f6fb77f4b6aad4016439c78cd751819dea634d23fdd124cb59aff58 Section: sound Priority: extra Description: An audio time-stretching and pitch-shifting utility Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains a command-line utility that can be used to exploit Rubber Band's capabilities. Package: rubberband-ladspa Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 269 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/rubberband-ladspa_3.3.0-17.1_amd64.deb Size: 110162 MD5sum: 3d98ec79705ca2a140c0d4107226edf9 SHA1: b9de6e08a757d21ff59828f8208b006e09efd731 SHA256: 38d848927ca1775f8e9b6a53079650efcd35aaf7168d8ae314ac1b0d0f087480 Section: sound Priority: extra Description: A LADSPA plugin for audio pitch-shifting Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains a LADSPA plugin. Package: rubberband-lv2 Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 282 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/rubberband-lv2_3.3.0-17.1_amd64.deb Size: 111948 MD5sum: fac988d4142d71e6c11418b895f45441 SHA1: 705a4f89ac97e7705a0ff8c1786316241e06c887 SHA256: 329072ecec3bc40f2f1c3ffae83da635c603875e105b2fe03c4d552132025a55 Section: sound Priority: extra Description: A LV2 plugin for audio pitch-shifting Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains a LV2 plugin. Package: rubberband-vamp Source: rubberband Version: 3.3.0-17.1 Architecture: amd64 Maintainer: Rui Nuno Capela Installed-Size: 282 Depends: librubberband2 (= 3.3.0-17.1) Filename: amd64/rubberband-vamp_3.3.0-17.1_amd64.deb Size: 114850 MD5sum: 96a1e2abcc0e55aed4fab66e5563b4a4 SHA1: 0692a6c6e17c689d58f737cb4ae1164e26c5000c SHA256: eee1f4bd84ae3f31cc4fff9cfc8a2a80e299354545a5b75bccc64b4dbc56a0d4 Section: sound Priority: extra Description: Vamp plugins using Rubber Band Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. This package contains VAMP plugins.