diff -ur fribidi-0.1.12.bak/aclocal.m4 fribidi-0.1.12/aclocal.m4
--- fribidi-0.1.12.bak/aclocal.m4 Fri May 19 05:14:44 2000
+++ fribidi-0.1.12/aclocal.m4 Fri Jul 14 18:01:11 2000
@@ -542,6 +542,206 @@
# Configure paths for GLIB
# Owen Taylor 97-11-3
+dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or
+dnl gthread is specified in MODULES, pass to glib-config
+dnl
+AC_DEFUN(AM_PATH_GLIB_2_0,
+[dnl
+dnl Get the cflags and libraries from the glib-config-2.0 script
+dnl
+AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)],
+ glib_config_prefix="$withval", glib_config_prefix="")
+AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
+ glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
+AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program],
+ , enable_glibtest=yes)
+
+ if test x$glib_config_exec_prefix != x ; then
+ glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
+ if test x${GLIB_CONFIG_2_0+set} != xset ; then
+ GLIB_CONFIG_2_0=$glib_config_exec_prefix/bin/glib-config-2.0
+ fi
+ fi
+ if test x$glib_config_prefix != x ; then
+ glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
+ if test x${GLIB_CONFIG_2_0+set} != xset ; then
+ GLIB_CONFIG_2_0=$glib_config_prefix/bin/glib-config-2.0
+ fi
+ fi
+
+ for module in . $4
+ do
+ case "$module" in
+ gmodule)
+ glib_config_args="$glib_config_args gmodule"
+ ;;
+ gobject)
+ glib_config_args="$glib_config_args gobject"
+ ;;
+ gthread)
+ glib_config_args="$glib_config_args gthread"
+ ;;
+ esac
+ done
+
+ AC_PATH_PROG(GLIB_CONFIG_2_0, glib-config-2.0, no)
+ min_glib_version=ifelse([$1], ,1.3.1,$1)
+ AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
+ no_glib=""
+ if test "$GLIB_CONFIG_2_0" = "no" ; then
+ no_glib=yes
+ else
+ GLIB_CFLAGS=`$GLIB_CONFIG_2_0 $glib_config_args --cflags`
+ GLIB_LIBS=`$GLIB_CONFIG_2_0 $glib_config_args --libs`
+ glib_config_major_version=`$GLIB_CONFIG_2_0 $glib_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ glib_config_minor_version=`$GLIB_CONFIG_2_0 $glib_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ glib_config_micro_version=`$GLIB_CONFIG_2_0 $glib_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+ if test "x$enable_glibtest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ LIBS="$GLIB_LIBS $LIBS"
+dnl
+dnl Now check if the installed GLIB is sufficiently new. (Also sanity
+dnl checks the results of glib-config-2.0 to some extent
+dnl
+ rm -f conf.glibtest
+ AC_TRY_RUN([
+#include <glib.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.glibtest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_glib_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_glib_version");
+ exit(1);
+ }
+
+ if ((glib_major_version != $glib_config_major_version) ||
+ (glib_minor_version != $glib_config_minor_version) ||
+ (glib_micro_version != $glib_config_micro_version))
+ {
+ printf("\n*** 'glib-config-2.0 --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
+ $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
+ glib_major_version, glib_minor_version, glib_micro_version);
+ printf ("*** was found! If glib-config-2.0 was correct, then it is best\n");
+ printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If glib-config-2.0 was wrong, set the environment variable GLIB_CONFIG_2_0\n");
+ printf("*** to point to the correct copy of glib-config-2.0, and remove the file config.cache\n");
+ printf("*** before re-running configure\n");
+ }
+ else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
+ (glib_minor_version != GLIB_MINOR_VERSION) ||
+ (glib_micro_version != GLIB_MICRO_VERSION))
+ {
+ printf("*** GLIB header files (version %d.%d.%d) do not match\n",
+ GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ glib_major_version, glib_minor_version, glib_micro_version);
+ }
+ else
+ {
+ if ((glib_major_version > major) ||
+ ((glib_major_version == major) && (glib_minor_version > minor)) ||
+ ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
+ glib_major_version, glib_minor_version, glib_micro_version);
+ printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the glib-config-2.0 shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GLIB, but you can also set the GLIB_CONFIG_2_0 environment to point to the\n");
+ printf("*** correct copy of glib-config-2.0. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_glib" = x ; then
+ AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT(no)
+ if test "$GLIB_CONFIG_2_0" = "no" ; then
+ echo "*** The glib-config-2.0 script installed by GLIB could not be found"
+ echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the GLIB_CONFIG_2_0 environment variable to the"
+ echo "*** full path to glib-config-2.0."
+ else
+ if test -f conf.glibtest ; then
+ :
+ else
+ echo "*** Could not run GLIB test program, checking why..."
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ LIBS="$LIBS $GLIB_LIBS"
+ AC_TRY_LINK([
+#include <glib.h>
+#include <stdio.h>
+], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
+ [ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GLIB or finding the wrong"
+ echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+ echo "***"
+ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+ echo "*** came with the system with the command"
+ echo "***"
+ echo "*** rpm --erase --nodeps gtk gtk-devel" ],
+ [ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
+ echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
+ echo "*** may want to edit the glib-config-2.0 script: $GLIB_CONFIG_2_0" ])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GLIB_CFLAGS=""
+ GLIB_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+ AC_SUBST(GLIB_CFLAGS)
+ AC_SUBST(GLIB_LIBS)
+ rm -f conf.glibtest
+])
+
+# Configure paths for GLIB
+# Owen Taylor 97-11-3
+
dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or
dnl gthread is specified in MODULES, pass to glib-config
@@ -576,6 +776,9 @@
gmodule)
glib_config_args="$glib_config_args gmodule"
;;
+ gobject)
+ glib_config_args="$glib_config_args gobject"
+ ;;
gthread)
glib_config_args="$glib_config_args gthread"
;;
@@ -685,7 +888,7 @@
fi
fi
if test "x$no_glib" = x ; then
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
diff -ur fribidi-0.1.12.bak/configure fribidi-0.1.12/configure
--- fribidi-0.1.12.bak/configure Fri May 19 05:14:51 2000
+++ fribidi-0.1.12/configure Fri Jul 14 18:01:13 2000
@@ -27,6 +27,12 @@
--with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)"
ac_help="$ac_help
--disable-glibtest Do not try to compile and run a test GLIB program"
+ac_help="$ac_help
+ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)"
+ac_help="$ac_help
+ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)"
+ac_help="$ac_help
+ --disable-glibtest Do not try to compile and run a test GLIB program"
# Initialize some variables set by options.
# The variables have the same names as the options, with
@@ -571,7 +577,7 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:575: checking for a BSD compatible install" >&5
+echo "configure:581: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -624,7 +630,7 @@
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:628: checking whether build environment is sane" >&5
+echo "configure:634: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
@@ -681,7 +687,7 @@
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:685: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:691: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -727,7 +733,7 @@
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:731: checking for working aclocal" >&5
+echo "configure:737: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -740,7 +746,7 @@
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:744: checking for working autoconf" >&5
+echo "configure:750: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -753,7 +759,7 @@
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:757: checking for working automake" >&5
+echo "configure:763: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -766,7 +772,7 @@
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:770: checking for working autoheader" >&5
+echo "configure:776: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -779,7 +785,7 @@
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:783: checking for working makeinfo" >&5
+echo "configure:789: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -873,7 +879,7 @@
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:877: checking host system type" >&5
+echo "configure:883: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -894,7 +900,7 @@
echo "$ac_t""$host" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:898: checking build system type" >&5
+echo "configure:904: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -914,7 +920,7 @@
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:918: checking for $ac_word" >&5
+echo "configure:924: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -944,7 +950,7 @@
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:948: checking for $ac_word" >&5
+echo "configure:954: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -974,7 +980,7 @@
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:978: checking for $ac_word" >&5
+echo "configure:984: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1025,7 +1031,7 @@
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1029: checking for $ac_word" >&5
+echo "configure:1035: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1057,7 +1063,7 @@
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1061: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1067: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1068,12 +1074,12 @@
cat > conftest.$ac_ext << EOF
-#line 1072 "configure"
+#line 1078 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1083: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -1099,12 +1105,12 @@
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1103: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1109: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1108: checking whether we are using GNU C" >&5
+echo "configure:1114: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1113,7 +1119,7 @@
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1117: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1123: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1132,7 +1138,7 @@
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1136: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1142: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1175,7 +1181,7 @@
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1179: checking for ld used by GCC" >&5
+echo "configure:1185: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
@@ -1199,10 +1205,10 @@
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1203: checking for GNU ld" >&5
+echo "configure:1209: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1206: checking for non-GNU ld" >&5
+echo "configure:1212: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1237,7 +1243,7 @@
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1241: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1247: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1253,7 +1259,7 @@
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1257: checking for BSD-compatible nm" >&5
+echo "configure:1263: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1289,7 +1295,7 @@
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1293: checking whether ln -s works" >&5
+echo "configure:1299: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1343,8 +1349,8 @@
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1347 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1348: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1353 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1354: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
@@ -1365,19 +1371,19 @@
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1369: checking whether the C compiler needs -belf" >&5
+echo "configure:1375: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1374 "configure"
+#line 1380 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
@@ -1482,7 +1488,7 @@
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1486: checking for $ac_word" >&5
+echo "configure:1492: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1512,7 +1518,7 @@
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1516: checking for $ac_word" >&5
+echo "configure:1522: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1563,7 +1569,7 @@
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1567: checking for $ac_word" >&5
+echo "configure:1573: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1595,7 +1601,7 @@
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1599: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1605: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1606,12 +1612,12 @@
cat > conftest.$ac_ext << EOF
-#line 1610 "configure"
+#line 1616 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -1637,12 +1643,12 @@
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1641: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1647: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1646: checking whether we are using GNU C" >&5
+echo "configure:1652: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1651,7 +1657,7 @@
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1655: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1661: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1670,7 +1676,7 @@
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1674: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1680: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1713,7 +1719,7 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1717: checking for a BSD compatible install" >&5
+echo "configure:1723: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1766,7 +1772,7 @@
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1770: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1776: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1820,6 +1826,272 @@
if test x$glib_config_exec_prefix != x ; then
glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
+ if test x${GLIB_CONFIG_2_0+set} != xset ; then
+ GLIB_CONFIG_2_0=$glib_config_exec_prefix/bin/glib-config-2.0
+ fi
+ fi
+ if test x$glib_config_prefix != x ; then
+ glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
+ if test x${GLIB_CONFIG_2_0+set} != xset ; then
+ GLIB_CONFIG_2_0=$glib_config_prefix/bin/glib-config-2.0
+ fi
+ fi
+
+ for module in .
+ do
+ case "$module" in
+ gmodule)
+ glib_config_args="$glib_config_args gmodule"
+ ;;
+ gobject)
+ glib_config_args="$glib_config_args gobject"
+ ;;
+ gthread)
+ glib_config_args="$glib_config_args gthread"
+ ;;
+ esac
+ done
+
+ # Extract the first word of "glib-config-2.0", so it can be a program name with args.
+set dummy glib-config-2.0; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1859: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG_2_0'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GLIB_CONFIG_2_0" in
+ /*)
+ ac_cv_path_GLIB_CONFIG_2_0="$GLIB_CONFIG_2_0" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GLIB_CONFIG_2_0="$GLIB_CONFIG_2_0" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GLIB_CONFIG_2_0="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GLIB_CONFIG_2_0" && ac_cv_path_GLIB_CONFIG_2_0="no"
+ ;;
+esac
+fi
+GLIB_CONFIG_2_0="$ac_cv_path_GLIB_CONFIG_2_0"
+if test -n "$GLIB_CONFIG_2_0"; then
+ echo "$ac_t""$GLIB_CONFIG_2_0" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ min_glib_version=1.3.1
+ echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
+echo "configure:1894: checking for GLIB - version >= $min_glib_version" >&5
+ no_glib=""
+ if test "$GLIB_CONFIG_2_0" = "no" ; then
+ no_glib=yes
+ else
+ GLIB_CFLAGS=`$GLIB_CONFIG_2_0 $glib_config_args --cflags`
+ GLIB_LIBS=`$GLIB_CONFIG_2_0 $glib_config_args --libs`
+ glib_config_major_version=`$GLIB_CONFIG_2_0 $glib_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ glib_config_minor_version=`$GLIB_CONFIG_2_0 $glib_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ glib_config_micro_version=`$GLIB_CONFIG_2_0 $glib_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_glibtest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ LIBS="$GLIB_LIBS $LIBS"
+ rm -f conf.glibtest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1917 "configure"
+#include "confdefs.h"
+
+#include <glib.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.glibtest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_glib_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_glib_version");
+ exit(1);
+ }
+
+ if ((glib_major_version != $glib_config_major_version) ||
+ (glib_minor_version != $glib_config_minor_version) ||
+ (glib_micro_version != $glib_config_micro_version))
+ {
+ printf("\n*** 'glib-config-2.0 --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
+ $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
+ glib_major_version, glib_minor_version, glib_micro_version);
+ printf ("*** was found! If glib-config-2.0 was correct, then it is best\n");
+ printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If glib-config-2.0 was wrong, set the environment variable GLIB_CONFIG_2_0\n");
+ printf("*** to point to the correct copy of glib-config-2.0, and remove the file config.cache\n");
+ printf("*** before re-running configure\n");
+ }
+ else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
+ (glib_minor_version != GLIB_MINOR_VERSION) ||
+ (glib_micro_version != GLIB_MICRO_VERSION))
+ {
+ printf("*** GLIB header files (version %d.%d.%d) do not match\n",
+ GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ glib_major_version, glib_minor_version, glib_micro_version);
+ }
+ else
+ {
+ if ((glib_major_version > major) ||
+ ((glib_major_version == major) && (glib_minor_version > minor)) ||
+ ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
+ glib_major_version, glib_minor_version, glib_micro_version);
+ printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the glib-config-2.0 shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GLIB, but you can also set the GLIB_CONFIG_2_0 environment to point to the\n");
+ printf("*** correct copy of glib-config-2.0. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+
+EOF
+if { (eval echo configure:1993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ no_glib=yes
+fi
+rm -fr conftest*
+fi
+
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_glib" = x ; then
+ echo "$ac_t""yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)" 1>&6
+ :
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$GLIB_CONFIG_2_0" = "no" ; then
+ echo "*** The glib-config-2.0 script installed by GLIB could not be found"
+ echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the GLIB_CONFIG_2_0 environment variable to the"
+ echo "*** full path to glib-config-2.0."
+ else
+ if test -f conf.glibtest ; then
+ :
+ else
+ echo "*** Could not run GLIB test program, checking why..."
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ LIBS="$LIBS $GLIB_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 2027 "configure"
+#include "confdefs.h"
+
+#include <glib.h>
+#include <stdio.h>
+
+int main() {
+ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
+; return 0; }
+EOF
+if { (eval echo configure:2037: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GLIB or finding the wrong"
+ echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+ echo "***"
+ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+ echo "*** came with the system with the command"
+ echo "***"
+ echo "*** rpm --erase --nodeps gtk gtk-devel"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
+ echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
+ echo "*** may want to edit the glib-config-2.0 script: $GLIB_CONFIG_2_0"
+fi
+rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GLIB_CFLAGS=""
+ GLIB_LIBS=""
+ # Check whether --with-glib-prefix or --without-glib-prefix was given.
+if test "${with_glib_prefix+set}" = set; then
+ withval="$with_glib_prefix"
+ glib_config_prefix="$withval"
+else
+ glib_config_prefix=""
+fi
+
+# Check whether --with-glib-exec-prefix or --without-glib-exec-prefix was given.
+if test "${with_glib_exec_prefix+set}" = set; then
+ withval="$with_glib_exec_prefix"
+ glib_config_exec_prefix="$withval"
+else
+ glib_config_exec_prefix=""
+fi
+
+# Check whether --enable-glibtest or --disable-glibtest was given.
+if test "${enable_glibtest+set}" = set; then
+ enableval="$enable_glibtest"
+ :
+else
+ enable_glibtest=yes
+fi
+
+
+ if test x$glib_config_exec_prefix != x ; then
+ glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
if test x${GLIB_CONFIG+set} != xset ; then
GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
fi
@@ -1837,6 +2109,9 @@
gmodule)
glib_config_args="$glib_config_args gmodule"
;;
+ gobject)
+ glib_config_args="$glib_config_args gobject"
+ ;;
gthread)
glib_config_args="$glib_config_args gthread"
;;
@@ -1846,7 +2121,7 @@
# Extract the first word of "glib-config", so it can be a program name with args.
set dummy glib-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1850: checking for $ac_word" >&5
+echo "configure:2125: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1881,7 +2156,7 @@
min_glib_version=1.2.0
echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
-echo "configure:1885: checking for GLIB - version >= $min_glib_version" >&5
+echo "configure:2160: checking for GLIB - version >= $min_glib_version" >&5
no_glib=""
if test "$GLIB_CONFIG" = "no" ; then
no_glib=yes
@@ -1904,7 +2179,7 @@
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 1908 "configure"
+#line 2183 "configure"
#include "confdefs.h"
#include <glib.h>
@@ -1980,7 +2255,7 @@
}
EOF
-if { (eval echo configure:1984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
@@ -1997,7 +2272,7 @@
fi
fi
if test "x$no_glib" = x ; then
- echo "$ac_t""yes" 1>&6
+ echo "$ac_t""yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)" 1>&6
:
else
echo "$ac_t""no" 1>&6
@@ -2014,7 +2289,7 @@
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$LIBS $GLIB_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2018 "configure"
+#line 2293 "configure"
#include "confdefs.h"
#include <glib.h>
@@ -2024,7 +2299,7 @@
return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
; return 0; }
EOF
-if { (eval echo configure:2028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GLIB or finding the wrong"
@@ -2062,6 +2337,11 @@
rm -f conf.glibtest
+ fi
+
+
+ rm -f conf.glibtest
+
trap '' 1 2 15
cat > confcache <<\EOF
@@ -2224,6 +2504,7 @@
s%@CC@%$CC%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
+s%@GLIB_CONFIG_2_0@%$GLIB_CONFIG_2_0%g
s%@GLIB_CONFIG@%$GLIB_CONFIG%g
s%@GLIB_CFLAGS@%$GLIB_CFLAGS%g
s%@GLIB_LIBS@%$GLIB_LIBS%g
diff -ur fribidi-0.1.12.bak/configure.in fribidi-0.1.12/configure.in
--- fribidi-0.1.12.bak/configure.in Fri May 19 05:08:15 2000
+++ fribidi-0.1.12/configure.in Fri Jul 14 18:00:12 2000
@@ -14,8 +14,9 @@
AC_PROG_INSTALL
AC_PROG_MAKE_SET
-AM_PATH_GLIB(1.2.0,,
- AC_MSG_ERROR(Test for GLIB failed. See the file 'INSTALL' for help.))
+AM_PATH_GLIB_2_0(1.3.1,,
+ [AM_PATH_GLIB(1.2.0,,
+ AC_MSG_ERROR(Test for GLIB failed. See the file 'INSTALL' for help.))])
AC_OUTPUT([
Makefile