INSTALLATION NOTES for OpenBSD/socppc 4.5 What is OpenBSD? ---------------- OpenBSD is a fully functional, multi-platform UN*X-like Operating System based on Berkeley Networking Release 2 (Net/2) and 4.4BSD-Lite. There are several operating systems in this family, but OpenBSD differentiates itself by putting security and correctness first. The OpenBSD team strives to achieve what is called a 'secure by default' status. This means that an OpenBSD user should feel safe that their newly installed machine will not be compromised. This 'secure by default' goal is achieved by taking a proactive stance on security. Since security flaws are essentially mistakes in design or implement- ation, the OpenBSD team puts as much importance on finding and fixing existing design flaws and implementation bugs as it does writing new code. This means that an OpenBSD system will not only be more secure, but it will be more stable. The source code for all critical system components has been checked for remote-access, local-access, denial- of-service, data destruction, and information-gathering problems. In addition to bug fixing, OpenBSD has integrated strong cryptography into the base system. A fully functional IPsec implementation is provided as well as support for common protocols such as SSL and SSH. Network filtering and monitoring tools such as packet filtering, NAT, and bridging are also standard, as well as several routing services, such as BGP and OSPF. For high performance demands, support for hardware cryptography has also been added to the base system. Because security is often seen as a tradeoff with usability, OpenBSD provides as many security options as possible to allow the user to enjoy secure computing without feeling burdened by it. To integrate more smoothly in other environments, OpenBSD 4.5 also provides, on some platforms, several binary emulation subsystems (which includes iBCS2, Linux, OSF/1, SunOS, SVR4, Solaris, and Ultrix compatibility), aiming at making the emulation as accurate as possible so that it is transparent to the user. Because OpenBSD is from Canada, the export of Cryptography pieces (such as OpenSSH, IPsec, and Kerberos) to the world is not restricted. (NOTE: OpenBSD can not be re-exported from the US once it has entered the US. Because of this, take care NOT to get the distribution from an FTP server in the US if you are outside of Canada and the US.) A comprehensive list of the improvements brought by the 4.5 release is available on the web at http://www.OpenBSD.org/45.html. OpenBSD/socppc runs on the Thecus N1200 PowerPC-based network disk appliances. Sources of OpenBSD: ------------------- This is a list of currently known FTP servers at the time of the 4.5 release. For a more recent list, please refer to http://www.OpenBSD.org/ftp.html Main server in Canada: ftp://ftp.OpenBSD.org/pub/OpenBSD (Alberta) 2nd level mirrors: ftp://spargel.kd85.com/pub/OpenBSD (Vienna) ftp://openbsd.informatik.uni-erlangen.de/pub/OpenBSD (Erlangen) ftp://ftp.stacken.kth.se/pub/OpenBSD (Stockholm) ftp://ftp5.usa.openbsd.org/pub/OpenBSD (Redwood City, CA) ftp://ftp3.usa.openbsd.org/pub/OpenBSD (Boulder, CO) ftp://rt.fm/pub/OpenBSD (Lake in the Hills, IL) Argentina: ftp://ftp.openbsd.md5.com.ar/pub/OpenBSD (Buenos Aires) Australia: ftp://ftp.it.net.au/mirrors/OpenBSD (Perth) Austria: ftp://playboy.wu-wien.ac.at/pub/OpenBSD (Vienna) Belgium: ftp://ftp.scarlet.be/pub/openbsd (Brussels) ftp://ftp.belnet.be/packages/openbsd (Brussels) Brazil: ftp://ftp.das.ufsc.br/pub/OpenBSD (Florianopolis, Santa Catarina) Bulgaria: ftp://ftp.bg.openbsd.org/pub/OpenBSD (Plovdiv) Canada: ftp://mirror.arcticnetwork.ca/pub/OpenBSD (Calgary) ftp://ftp.ca.openbsd.org/pub/OpenBSD (Edmonton) ftp://gulus.usherbrooke.ca/pub/distro/OpenBSD (Quebec) China: ftp://ftp.freebsdchina.org/pub/OpenBSD (Shanghai) Denmark: ftp://mirrors.dotsrc.org/openbsd (Aalborg) ftp://ftp.dkuug.dk/pub/OpenBSD (Copenhagen) Estonia: ftp://ftp.aso.ee/pub/OpenBSD (Tallinn) Finland: ftp://mirrors.nic.funet.fi/pub/OpenBSD (Espoo) ftp://ftp.jyu.fi/pub/OpenBSD (Jyvaskyla) France: ftp://ftp.arcane-networks.fr/pub/OpenBSD (Paris) ftp://ftp.crans.org/pub/OpenBSD (Paris) ftp://ftp.irisa.fr/pub/OpenBSD (Rennes) Germany: ftp://openbsd.ftp.fu-berlin.de/pub/OpenBSD (Berlin) ftp://ftp.spline.de/pub/OpenBSD (Berlin) ftp://ftp.freenet.de/pub/ftp.openbsd.org/pub/OpenBSD (Duesseldorf) ftp://ftp-stud.fht-esslingen.de/pub/OpenBSD (Esslingen) ftp://mirror.roothell.org/pub/OpenBSD (Nuremberg) ftp://ftp.bytemine.net/pub/OpenBSD (Oldenburg) Greece: ftp://filoktitis.noc.uoa.gr/pub/OpenBSD (Athens) ftp://ftp.physics.auth.gr/pub/mirrors/OpenBSD/OpenBSD (Thessaloniki) ftp://ftp.duth.gr/pub/OpenBSD (Thrace) ftp://ftp.cc.uoc.gr/mirrors/OpenBSD (Heraklion) Hungary: ftp://ftp.fsn.hu/pub/OpenBSD (Budapest) Ireland: ftp://ftp.esat.net/pub/OpenBSD (Dublin) ftp://ftp.heanet.ie/pub/OpenBSD (Dublin) Israel: ftp://mirror.inter.net.il/pub/OpenBSD (Petach Tiqwa) Italy: ftp://ftp.unina.it/pub/OpenBSD (Napoli) Japan: ftp://ftp.jaist.ac.jp/pub/OpenBSD (Ishikawa) ftp://ftp.nara.wide.ad.jp/pub/OpenBSD (Nara) ftp://ftp.jp.openbsd.org/pub/OpenBSD (Tokyo) ftp://ftp.kddlabs.co.jp/OpenBSD (Tokyo) Korea: ftp://ftp.kaist.ac.kr/pub/OpenBSD (Daejeon) Latvia: ftp://ftp.secure.lv/pub/OpenBSD (Riga) ftp://ftp.bsd.lv/pub/OpenBSD (Riga) The Netherlands: ftp://ftp.calyx.nl/pub/OpenBSD (Amsterdam) ftp://ftp.nluug.nl/pub/OpenBSD (Utrecht) ftp://mirror.hostfuss.com/pub/OpenBSD (Amsterdam) Norway: ftp://ftp.inet.no/pub/OpenBSD (Oslo) ftp://ftp.uninett.no/pub/OpenBSD (Oslo) ftp://jane.tihlde.org/pub/OpenBSD (Trondheim) Poland: ftp://ftp.task.gda.pl/pub/OpenBSD (Gdansk) Portugal: ftp://ftp.fmed.uc.pt/pub/OpenBSD (Coimbra) Russia: ftp://ftp.chg.ru/pub/OpenBSD (Chernogolovka-Moscow) ftp://ftp.gamma.ru/pub/OpenBSD (Moscow) Slovenia: ftp://ftp.obsd.si/pub/OpenBSD (Ljubljana) Spain: ftp://ftp.rediris.es/mirror/OpenBSD (Madrid) ftp://ftp.udc.es/pub/OpenBSD (A Coruna) Sweden: ftp://ftp.su.se/pub/OpenBSD (Stockholm) ftp://ftp.btradianz.se/pub/OpenBSD (Stockholm) Switzerland: ftp://mirror.switch.ch/pub/OpenBSD (Zurich) Turkey: ftp://ftp.enderunix.org/pub/OpenBSD (Istanbul) Ukraine: ftp://gaia.colocall.net/pub/OpenBSD (Kiev) United Kingdom: ftp://ftp.public-internet.co.uk/pub/OpenBSD (London) ftp://ftp.mirrorservice.org/pub/OpenBSD (Kent) USA: ftp://mirror.planetunix.net/pub/OpenBSD (Chicago, IL) ftp://osmirrors.cerias.purdue.edu/pub/OpenBSD (West Lafayette, IN) ftp://mirror.iawnet.sandia.gov/pub/OpenBSD (Albuquerque, NM) ftp://ftp.cse.buffalo.edu/pub/OpenBSD (Buffalo, NY) ftp://mirrors.24-7-solutions.net/pub/OpenBSD (New York, NY) ftp://openbsd.mirrors.pair.com (Pittsburgh, PA) ftp://carroll.cac.psu.edu/pub/OpenBSD (PA) ftp://openbsd.mirrors.tds.net/pub/OpenBSD (Madison, WI) Additionally, the file ftp://ftp.OpenBSD.org/pub/OpenBSD/ftplist contains a list which is continually updated. If you wish to become a distribution site for OpenBSD, contact . OpenBSD 4.5 Release Contents: ----------------------------- The OpenBSD 4.5 release is organized in the following way. In the .../4.5 directory, for each of the architectures having an OpenBSD 4.5 binary distribution, there is a sub-directory. The socppc-specific portion of the OpenBSD 4.5 release is found in the "socppc" subdirectory of the distribution. That subdirectory is laid out as follows: .../4.5/socppc/ INSTALL.socppc Installation notes; this file. MD5 Output of the md5(1) program, usable for verification of the correctness of downloaded files. *.tgz socppc binary distribution sets; see below. bsd A stock GENERIC socppc kernel which will be installed on your system during the install. bsd.rd A compressed RAMDISK kernel; the embedded filesystem contains the installation tools. Used for simple installation from a pre-existing system. bsd.bin A RAMDISK kernel that can be loaded directly by the U-Boot firmware. Used for installation. boot The OpenBSD/socppc secondary boot loader. The OpenBSD/socppc binary distribution sets contain the binaries which comprise the OpenBSD 4.5 release for socppc systems. There are eleven binary distribution sets. The binary distribution sets can be found in the "socppc" subdirectory of the OpenBSD 4.5 distribution tree, and are as follows: base45 The OpenBSD/socppc 4.5 base binary distribution. You MUST install this distribution set. It contains the base OpenBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. [ 58.7 MB gzipped, 170.8 MB uncompressed ] comp45 The OpenBSD/socppc Compiler tools. All of the tools relating to C, C++, Objective-C and Fortran are supported. This set includes the system include files (/usr/include), the linker, the compiler tool chain, and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. [ 106.3 MB gzipped, 268.7 MB uncompressed ] etc45 This distribution set contains the system configuration files that reside in /etc and in several other places. This set MUST be installed if you are installing the system from scratch, but should NOT be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and CAREFULLY upgrade your configuration files by hand; see the section named Upgrading a previously-installed OpenBSD System" below.) [ 503.9 KB gzipped, 1.4 MB uncompressed ] game45 This set includes the games and their manual pages. [ 2.6 MB gzipped, 5.9 MB uncompressed ] man45 This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. [ 7.8 MB gzipped, 28.6 MB uncompressed ] misc45 This set includes the system dictionaries (which are rather large), and the typesettable document set. [ 2.7 MB gzipped, 9.4 MB uncompressed ] xbase45 This set includes the base X distribution. This includes programs, headers and libraries. [ 0.0 KB gzipped, 31.1 MB uncompressed ] xetc45 This set includes the X window system configuration files that reside in /etc. It's the equivalent of etc45 for X. [ 0.0 KB gzipped, 287.6 KB uncompressed ] xfont45 This set includes all of the X fonts. [ 0.0 KB gzipped, 41.7 MB uncompressed ] xserv45 This set includes all of the X servers. [ 0.0 KB gzipped, 16.9 MB uncompressed ] xshare45 This set includes all text files equivalent between all architectures. [ 0.0 KB gzipped, 14.0 MB uncompressed ] OpenBSD System Requirements and Supported Devices: -------------------------------------------------- OpenBSD/socppc only runs on the Thecus N1200 at the moment. Getting the OpenBSD System onto Useful Media: --------------------------------------------- Installation is supported from several media types, including: CD-ROM FFS partitions (for upgrades only) FTP HTTP Although you can access the distribution sets directly from the CD-ROM or from one of the FTP mirrors over the internet, you may wish to transfer the sets to a local FTP server, or copy them to a partition on the target system's disk (for upgrades only). The steps necessary to prepare the distribution sets for installation depend on which method of installation you choose. Some methods require a bit of setup first that is explained below. The installation allows installing OpenBSD directly from FTP mirror sites over the internet, however you must consider the speed and reliability of your internet connection for this option. It may save much time and frustration to use ftp get/reget to transfer the distribution sets to a local server or disk and perform the installation from there, rather than directly from the internet. If you are upgrading OpenBSD, you also have the option of installing OpenBSD by putting the new distribution sets somewhere in your existing file system, and using them from there. To do that, do the following: Place the distribution sets you wish to upgrade somewhere in your current file system tree. At a bare minimum, you must upgrade the "base" binary distribution, and so must put the "base45" set somewhere in your file system. It is recommended that you upgrade the other sets, as well. Preparing your System for OpenBSD Installation: ----------------------------------------------- To be able to boot the OpenBSD/socppc installation program, you will need to learn a bit about Das U-Boot, the low-level process that controls the microprocessor after hardware initialization. Talking to the Thecus The Thecus N1200 needs a serial cable. On the back of the disk drive circuit board, there is either a 10-pin header (with one pin removed), or 9 holes for you to solder in your own header. The ribbon cable that connects from there to your serial cable or the serial port on your computer is of the same type as used on older i386 PCs, but be aware that there are two different types of 10-pin IDC to DB-9M ribbon cable in use, which look identical (the differences are hidden inside the DB-9 connector). The cable you need is wired using the "AT-Everex" or "Asus" pinout, as described here: http://www.pccables.com/07120.htm and *not* the more straightforward to solder "crossed" type: http://www.pccables.com/07121.htm. If you wish to check a cable, or make your own, the pinouts are: DB9 IDC10 === ===== 1 2 3 4 5 1 3 5 7 9 6 7 8 9 2 4 6 8 10 Wire pin 1 to 1, 2 to 2 etc, with 10 not connected. Booting Thecus N1200 When you have connected your computer, a command like "tip -115200 tty00" (assuming you're using the first serial port on your machine) should connect you to the Thecus console. Now apply power to the Thecus and start it. After some device probe information, you should see this prompt: Hit any key to stop autoboot: 1 You have exactly one second to press a key and enter interactive U-Boot. Fortunately it will typically accept a key typed during the diagnostics that precede this prompt. The recommended way to boot OpenBSD on Thecus is to configure networking and load bsd.bin from a TFTP server. First networking must be configured using the setenv command. => setenv ipaddr 10.0.0.21 => setenv serverip 10.0.0.7 => setenv gatewayip 10.0.0.7 Once you have done this, and have set up your TFTP server on the gateway machine (10.0.0.7 in the above example), you can boot manually. => tftpboot 200000 bsd.bin Speed: 1000, full duplex Using Freescale TSEC0 device TFTP from server 10.0.0.7; our IP address is 10.0.0.21 Filename 'bsd.bin'. Load address: 0x200000 Loading: ########################################################## ############################################################# ... ###### done Bytes transferred = 295148 (480ec hex) => go 200000 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.3 (RAMDISK) #175: Tue Mar 4 21:54:34 MST 2008 deraadt@socppc.openbsd.org:/usr/src/sys/arch/socppc/compile/RAMDISK real mem = 134217728 (128MB) avail mem = 122384384 (116MB) ... Install(I), Upgrade(U) or Shell(S)? If you then install to your hard disk, in future you can load the OpenBSD/socppc boot loader => tftpboot 200000 boot => bootm and just hit "return" to boot OpenBSD. Automatic Booting However, for easier booting, you may wish to modify the flash memory so that the Thecus will boot automatically into OpenBSD when it is powered up. => erase fe780000 fe800000 .... done Erased 4 sectors => tftpboot 200000 boot Speed: 1000, full duplex Using Freescale TSEC0 device TFTP from server 10.0.0.7; our IP address is 10.0.0.21 Filename 'boot'. Load address: 0x200000 Loading: ########################################################## done Bytes transferred = 295148 (480ec hex) => cp 200000 fe780000 20000 Copy to Flash... 512 KBdone => setenv bootcmd bootm FE780000 => saveenv Saving Environment to Flash... Un-Protected 2 sectors Erasing Flash... .. done Erased 2 sectors Writing to Flash... 256 KBdone Protected 2 sectors => reset This configuration can easily be set back to the default, as the Linux system does not get erased from the flash memory. To set it back, just change the boot script with fconfig back to what it was, for example: => setenv bootcmd flashboot => saveenv The bootloader is command driven with timeout like many other OpenBSD architectures. It may be needed to increase the 'bootdelay' variable in order to give the SATA-chip a chance to initialize. Having a too short delay could cause OpenBSD/socppc to not find it's root device (and thus kernel image). In some cases as much as ten seconds are needed for the delay, although five seconds will do in most cases: => setenv bootdelay 5 => saveenv Installing the OpenBSD System: ------------------------------ Installing OpenBSD is a relatively complex process, but if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble. You should now be ready to install OpenBSD. The following is a walk-through of the steps you will take while getting OpenBSD installed on your hard disk. If any question has a default answer, it will be displayed in brackets ("[]") after the question. If you wish to stop the installation, you may hit Control-C at any time, but if you do, you'll have to begin the installation process again from scratch. Using Control-Z to suspend the process may be a better option, or at any prompt enter '!' to get a shell, from which 'exit' will return you back to that prompt (no refresh of the prompt though). Once the kernel has loaded, you will be presented with the OpenBSD kernel boot messages. You will want to read them to determine your disks name and geometry. Its name will be something like "wd0". You will also need to know the device name to tell the install tools what disk to install on. If you cannot read the messages as they scroll by, do not worry -- you can get at this information later inside the install program. You will next be asked for your terminal type. If you are installing from a non-serial console, the default of "vt220" is correct. If you are installing from a serial console you should choose the terminal type from amongst those listed. (If your terminal type is xterm, just use vt220.) After entering the terminal type you will be asked whether you wish to do an "(I)nstall" or an "(U)pgrade". Enter 'I' for a fresh install or 'U' to upgrade an existing installation. You will be presented with a welcome message and asked if you really wish to install (or upgrade). Assuming you answered yes, the install program will then tell you which disks it can install on, and ask you which it should use. Reply with the name of your disk. Next you will have to edit or create a disk label for the disk OpenBSD is being installed on. If there are any existing partitions defined (for any operating system), and a disk label is not found, you will first be given an opportunity to run fdisk and create an OpenBSD partition. If fdisk is being invoked on your behalf, it will start by displaying the current partitions defined and then allow you to modify this information, add new partitions and change which partition to boot from by default. If you make a mistake, you will be allowed to repeat this procedure as necessary to correct this. Note that you should make OpenBSD be the active partition at least until the install has been completed. Next the disk label which defines the layout of the OpenBSD partitions must be set up. Each file system you want will require a separate partition. The installation script will invoke an interactive editor allowing you to create your desired layout. If you are labeling a new disk, you will probably start out with only the 'c' partition of fstype 'unused' that represents the whole disk. You cannot modify the 'c' partition! You must create partition 'a' as a native OpenBSD partition, i.e. one with "4.2BSD" as the fstype, to hold the root file system. In addition to partition 'a' you should create partition 'b' with fstype "swap", and native OpenBSD partitions to hold separate file systems for /usr, /tmp, /var, and /home. For quick help while in the interactive editor, enter '?'. Enter 'M' to view the entire manual page (see the info on the ``-E'' flag). To exit the editor enter 'q'. After you exit the interactive editor the install program will ask you to confirm or specify where each "4.2BSD" partition in the disklabel is to be mounted. The 'a' partition is always the root file system. The install program will cycle over the other "4.2BSD" partitions until you enter "done". When you enter "done" you will be asked to confirm that the partition and mount point information is correct. This is the point of no return! If you accept the displayed information new file systems are created on all partitions to be mounted. This will DESTROY ALL EXISTING DATA on those partitions. After all your file systems have been created, the install program will prompt you for the system hostname, and will give you an opportunity to configure the network. The network configuration you enter (if any) can then be used to do the install from another system using HTTP or FTP, and will also be the configuration used by the system after the installation is complete. Note that the system hostname should be without the domain part. If you select to configure the network, the install program will ask you for the name of your system and the DNS domain name to use. Note that the host name should be without the domain part, and that the domain name should NOT include the host name part. If you select to configure the network, the install program will give you a list of network interfaces you can configure. For each network interface you select to configure, it will ask for the IP address to use, the symbolic host name to use, the netmask to use, and any interface-specific flags to set. If the IP address should be obtained from a DHCP server, simply enter ``dhcp'' when asked for the IP address. The interface-specific flags are usually used to determine which media the network card is to use. Typically no media flags are required as autodetection normally works, but you will be prompted with a list of the acceptable media flags, and asked if you want to provide any. In doubt, do not enter any media flags; or you can refer to the manual page for your interface for the appropriate flags. After all network interfaces have been configured, the install pro- gram will ask for the DNS domain name to use, as well as the IP address of the primary name server to use. Finally, you will be asked for the IP address of the default route. You will also be presented with an opportunity to edit the host table. At this point you will be asked for the initial root password of the system, twice. Although the install program will only check that the two passwords match, you should make sure to use a strong password. As a minimum, the password should be at least six characters long and a mixture of both lower and uppercase letters, numbers and punctuation characters. After these preparatory steps have been completed, you will be able to extract the distribution sets onto your system. There are several install methods supported; FTP, HTTP, tape, CD-ROM, or a local disk partition. Note that installation from floppies is not currently supported. To install via FTP: To begin an FTP install you will need the following pieces of information. Don't be daunted by this list; the defaults are sufficient for most people. 1) Proxy server URL if you are using a URL-based FTP proxy (squid, CERN FTP, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing FTP (assuming you have a proxy available to use). 2) Do you need to use active mode FTP? By default, ftp will attempt to use passive mode and fall back to an active connection if the server does not support passive mode. You only need to enable this option if you are connecting to a buggy FTP daemon that implements passive FTP incorrectly. Note that you will not be asked about active FTP if you are using a proxy. 3) The IP address (or hostname if you enabled DNS earlier in the install) of an FTP server carrying the OpenBSD 4.5 distribution. If you don't know, answer ``y'' when asked if you want to see a list of such hosts. 4) The FTP directory holding the distribution sets. The default value of pub/OpenBSD/4.5/socppc is almost always correct. 5) The login and password for the FTP account. You will only be asked for a password for non-anonymous FTP. For instructions on how to complete the installation via FTP, see the section named "Common URL installations" below. To install via HTTP: To begin an HTTP install you will need the following pieces of information: 1) Proxy server URL if you are using a URL-based HTTP proxy (squid, CERN FTP, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing HTTP connections (assuming you have a proxy available to use). 2) The IP address (or hostname if you enabled DNS earlier in the install) of an HTTP server carrying the OpenBSD 4.5 distribution. If you don't know, answer ``y'' when asked if you want to see a list of such hosts. 3) The directory holding the distribution sets. There is no standard location for this; You should use the directory specified along with the server in the list of official HTTP mirror sites that you received in step 3. For instructions on how to complete the installation via HTTP, see the section named "Common URL installations" below. To install from CD-ROM: When installing from a CD-ROM, you will be asked which device holds the distribution sets. This will typically be "cd0". Next you will be asked which partition on the CD-ROM the distribution is to be loaded from. This is normally partition "a". Next you will have to identify the file system type that has been used to create the distribution on the CD-ROM, this can be either FFS or ISO CD9660. The OpenBSD CD-ROM distribution uses the CD9660 format. You will also have to provide the relative path to the directory on the CD-ROM which holds the distribution, for the socppc this is "4.5/socppc". For instructions on how to complete the installation from the CD-ROM distribution, see the section named "Common file system installations" below. To install from a local disk partition: When installing from a local disk partition, you will first have to identify which disk holds the distribution sets. This is normally "wdN" or "sdN", where N is a number 0 through 9. Next you will have to identify the partition within that disk that holds the distribution; this is a single letter between 'a' and 'p'. You will also have to identify the type of file system residing in the partition identified. Currently, you can install from partitions that have been formatted as the Berkeley fast file system (ffs), Linux (ext2) or MS-DOS. You will also have to provide the relative path to the directory on the file system where the distribution sets are located. Note that this path should not be prefixed with a '/'. For instructions on how to complete the installation from a local disk partition, see the next section. Common file system installations: The following instructions are common to installations from mounted disk partitions and CD-ROMs. A list of available distribution sets will be listed. You may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, e.g. `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to extract file sets. Assuming you acquiesce, the files will begin to extract. If not, you will be given the option of installing sets via one of the other install methods. Common URL installations: Once you have entered the required information, the install program will fetch a file list and present a list of all the distribution sets that were found in the specified directory. (If no valid sets were found, you will be notified and given the option of unpacking any gzipped tar files found or getting a file list if none were found.) At this point you may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, e.g. `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to download and install the files. Assuming you acquiesce, the files will begin to download and unpack. If not, you will be given the option of installing sets via one of the other install methods. When all the selected distribution sets have been extracted, you will be asked whether you want to start shhd(8) by default, as well as your ntp server (ntpd(8) will not be started by default if you don't provide a server). The last thing you'll need to configure is the time zone your system will be using. For this work properly, it is expected that you have installed at least the "base45", "etc45", and "bsd" distribution sets. The installer program will the proceed to create all the device nodes needed by the installed system, and will unmount the file systems. Congratulations, you have successfully installed OpenBSD 4.5. When you reboot into OpenBSD, you should log in as "root" at the login prompt. You should create yourself an account and protect it and the "root" account with good passwords. The install program leaves root an initial mail message. We recommend you read it, as it contains answers to basic questions you might have about OpenBSD, such as configuring your system, installing packages, getting more information about OpenBSD, sending in your dmesg output and more. To do this, run mail and then just enter "more 1" to get the first message. You quit mail by entering "q". Some of the files in the OpenBSD 4.5 distribution might need to be tailored for your site. We recommend you run: man afterboot which will tell you about a bunch of the files needing to be reviewed. If you are unfamiliar with UN*X-like system administration, it's recommended that you buy a book that discusses it. Upgrading a previously-installed OpenBSD System: ------------------------------------------------ Warning! Upgrades to OpenBSD 4.5 are currently only supported from the immediately previous release. The upgrade process will also work with older releases, but might not execute some migration tasks that would be necessary for a proper upgrade. The best solution, whenever possible, is to backup your data and reinstall from scratch. To upgrade OpenBSD 4.5 from a previous version, start with the general instructions in the section "Installing OpenBSD". Boot from bsd.rd on the boot disk. When prompted, select the (U)pgrade option rather than the (I)nstall option at the prompt in the install process. The upgrade script will ask you for the existing root partition, and will use the existing filesystems defined in /etc/fstab to install the new system in. It will also use your existing network parameters. From then, the upgrade procedure is very close to the installation procedure described earlier in this document. Note that the upgrade procedure will not let you pick neither the ``etc45.tgz'' nor the ``xetc45.tgz'' sets, so as to preserve your files in `/etc' which you are likely to have customized since a previous installation. However, it is strongly advised that you unpack the etc45.tgz and xetc45.tgz sets in a temporary directory and merge changes by hand, or with the help of the sysmerge(8) helper script, since all components of your system may not function correctly until your files in `/etc' are updated. Getting source code for your OpenBSD System: -------------------------------------------- Now that your OpenBSD system is up and running, you probably want to get access to source code so that you can recompile pieces of the system. A few methods are provided. If you have an OpenBSD CD-ROM, the source code is provided. Otherwise, you can get the pieces over the Internet using anonymous CVS, CTM, CVSync or FTP. For more information, see http://www.OpenBSD.org/anoncvs.html http://www.OpenBSD.org/ctm.html http://www.OpenBSD.org/cvsync.html http://www.OpenBSD.org/ftp.html Using online OpenBSD documentation: ----------------------------------- Documentation is available if you first install the manual pages distribution set. Traditionally, the UN*X "man pages" (documentation) are denoted by 'name(section)'. Some examples of this are intro(1), man(1), apropos(1), passwd(1), passwd(5) and afterboot(8). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The 'man' command is used to view the documentation on a topic, and is started by entering 'man [section] topic'. The brackets [] around the section should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the least-numbered section name will be displayed. For instance, after logging in, enter man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where "subject-word" is your topic of interest; a list of possibly related man pages will be displayed. Adding third party software; ``packages'' and ``ports'': -------------------------------------------------------- As complete as your OpenBSD system is, you may want to add any of several excellent third party software applications. There are several ways to do this. You can: 1) Obtain the source code and build the application based upon whatever installation procedures are provided with the application. 2) Use the OpenBSD ``ports'' collection to automatically get any needed source file, apply any required patches, create the application, and install it for you. 3) Use the OpenBSD ``package'' collection to grab a pre-compiled and tested version of the application for your hardware. If you purchased the OpenBSD CD-ROM set you already have several popular ``packages'', and the ``ports'' collection. Instructions for installing applications from the various sources using the different installation methods follow. You should also refer to the packages(7) manual page. Installing applications from the CD-ROM package collection: The OpenBSD CD-ROM ships with several applications pre-built for various hardware architectures. The number of applications vary according to available disk space. Check the directory 4.5/packages/powerpc to see which packages are available for your hardware architecture. That directory will be on the same CD-ROM containing the OS installation files for your architecture. To install one or more of these packages you must: 1) become the superuser (root). 2) mount the appropriate CD-ROM. 3) use the ``pkg_add'' command to install the software. Example (in which we use su(1) to get superuser privileges, thus you have to be in group "wheel", see the manual page for su(1)). $ su Password: # mkdir -p /cdrom # mount /dev/cd0a /cdrom # pkg_add /cdrom/4.5/packages/powerpc/ # # umount /cdrom Package names are usually the application name and version with .tgz appended, e.g. emacs-21.3.tgz Installing applications from the ftp.OpenBSD.org package collection: All available packages for your architecture have been placed on ftp.OpenBSD.org in the directory pub/OpenBSD/4.5/packages/powerpc/ You may want to peruse this to see what packages are available. The packages are also on the OpenBSD FTP mirror sites. See http://www.OpenBSD.org/ftp.html for a list of current FTP mirror sites. Installation of a package is very easy. 1) become the superuser (root) 2) use the ``pkg_add'' command to install the software ``pkg_add'' is smart enough to know how to download the software from the OpenBSD FTP server. Example: $ su Password: # pkg_add \ ftp://ftp.OpenBSD.org/pub/OpenBSD/4.5/packages/powerpc/emacs-21.3.tgz Installing applications from the CD-ROM ports collection: The CD-ROM ``ports'' collection is a set of Makefiles, patches, and other files used to control the building and installation of an application from source files. Creating an application from sources can require a lot of disk space, sometimes 50 megabytes or more. The first step is to determine which of your disks has enough room. Once you've made this determination, read the file PORTS located on the CD-ROM which contains the ports tree. To build an application you must: 1) become the superuser (root) 2) have network access, or obtain the actual source files by some other means. 3) cd to the ports directory containing the port you wish to build. To build samba, for example, where you'd previously copied the ports files into the /usr/ports directory: cd /usr/ports/net/samba 4) make 5) make install 6) make clean Installing applications from the OpenBSD ports collection: See http://www.OpenBSD.org/ports.html for current instructions on obtaining and installing OpenBSD ports. You should also refer to the ports(7) manual page. Installing other applications: If an OpenBSD package or port does not exist for an application you're pretty much on your own. The first thing to do is ask if anyone is working on a port -- there may be one in progress. If no such port exists, you might want to look at the FreeBSD ports or NetBSD pkgsrc for inspiration. If you can't find an existing port, try to make your own and feed it back to OpenBSD. That's how our ports collection grows. Some details can be found at http://www.OpenBSD.org/porting.html with more help coming from the mailing list, . Administrivia: -------------- There are various mailing lists available via the mailing list server at . To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instructions. There are also two OpenBSD Usenet newsgroups, comp.unix.bsd.openbsd.announce for important announcements and comp.unix.bsd.openbsd.misc for general OpenBSD discussion. More information about the various OpenBSD mailing list and proper netiquette is available at http://www.OpenBSD.org/mail.html To report bugs, use the 'sendbug' command shipped with OpenBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: bugs@OpenBSD.org Use of 'sendbug' is encouraged, however, because bugs reported with it are entered into the OpenBSD bugs database, and thus can't slip through the cracks. As a favor, please avoid mailing huge documents or files to the mailing lists. Instead, put the material you would have sent up for FTP somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. For more information about reporting bugs, see http://www.OpenBSD.org/report.html