Package: cdebootstrap-udeb Priority: optional Section: debian-installer Installed-Size: 140 Maintainer: Bastian Blank Architecture: hppa Source: cdebootstrap Version: 0.3.10bpo1 Depends: libc6 (>= 2.3.2.ds1-21), libdebconfclient0, libdebian-installer-extra4 (>= 0.29), libdebian-installer4 (>= 0.29) Filename: pool/main/c/cdebootstrap/cdebootstrap-udeb_0.3.10bpo1_hppa.udeb Size: 19870 MD5sum: af12ec6251c8b1d6d97df8858c1b4185 SHA1: e2d1f0a6bf41481c2dc18ef7cf8b9428e78f186f SHA256: d4f72bad66596bf5671981ba5d074e9b30c388fe9eeca27502fa6757ea4a18d4 Description: Bootstrap a Debian system cdebootstrap is used to create a Debian base system from scratch. Package: cryptsetup-udeb Priority: optional Section: debian-installer Installed-Size: 452 Maintainer: Debian Cryptsetup Team Architecture: hppa Source: cryptsetup Version: 2:1.0.3-2bpo1 Depends: libc6 (>= 2.3.2.ds1-21), libdevmapper1.01, libpopt0 (>= 1.7), libuuid1, dmsetup-udeb Filename: pool/main/c/cryptsetup/cryptsetup-udeb_1.0.3-2bpo1_hppa.udeb Size: 201712 MD5sum: ca563d7c1a99a5c02e36311ad0c45338 SHA1: 7bad60b64e6a0e27d2540c88ef016095bf766ec4 SHA256: 4006e5b3faba7c53f76a947088f4a83b2be5ba28d53381620a465ea33cbca78f Description: configures encrypted block devices Since kernel 2.6.4, encrypted filesystem support is provided by the device mapper target dm-crypt. This utility provides a command-line interface for configuring this facility. It has integrated support for LUKS. . cryptsetup is backwards compatible with the on-disk format of cryptoloop, but also supports more secure formats. This package also includes support for automatically configuring encrypted devices at boot time via the config file /etc/crypttab. When combined with newer versions of the debian initrd-tools and standard debian kernels, cryptoroot is also supported. Package: debian-archive-keyring-udeb Priority: standard Section: debian-installer Installed-Size: 28 Maintainer: Michael Vogt Architecture: all Source: debian-archive-keyring Version: 2006.11.22~bpo.2 Recommends: gpgv-udeb Filename: pool/main/d/debian-archive-keyring/debian-archive-keyring-udeb_2006.11.22~bpo.2_all.udeb Size: 7230 MD5sum: d087231ba12ab805404846e6171405e6 SHA1: b1482dcf9756fb907622a3efd38d5acd69d5ba5b SHA256: 12b81a25174f15bc3616458c2b619afe4298111a4d81aa86993f0acc9c9d86ec Description: GnuPG keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that, in a minimal form for use in the installer. Package: debootstrap-udeb Priority: required Section: debian-installer Installed-Size: 164 Maintainer: Anthony Towns Architecture: hppa Source: debootstrap Version: 0.3.3~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), mounted-partitions Filename: pool/main/d/debootstrap/debootstrap-udeb_0.3.3~bpo.1_hppa.udeb Size: 36768 MD5sum: 1ac5ee70131d68e0f45fd8a836e246c3 SHA1: 282fd0fce43e91b4554da63a75001f9d54fd32a3 SHA256: 515d206c9ab9226232c8214953e90b55a20724a7aa53117445090b94e4cbc399 Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: discover1-data-udeb Priority: extra Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team Architecture: all Source: discover1-data Version: 1.2006.01.14~bpo.1 Filename: pool/main/d/discover1-data/discover1-data-udeb_1.2006.01.14~bpo.1_all.udeb Size: 18012 MD5sum: e1442e407cb71424010f60720fc37f68 SHA1: 2ba73f3304bb245e2075f2dd26b218ff0945bc47 SHA256: d3a7e51e4987d4ca2a210259f33e19ccd5ad53af58535c8a6fc51157ff45fbd0 Description: hardware lists for libdiscover1 (short list) The libdiscover1 library requires this package to look up information about various hardware devices using the identification data that they report. It contains data detailing various PCI, PCMCIA, and USB devices. . There are two separate lists for kernel versions 2.4 and 2.6. Discover automatically chooses the appropriate list for your running kernel. . This is the short list of HW required by d-i during installation. Package: discover1-udeb Priority: extra Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team Architecture: hppa Source: discover1 Version: 1.7.18~bpo.1 Provides: discover Depends: libc6 (>= 2.3.2.ds1-21), libdiscover1, discover1-data-udeb (>= 1.2004.09.24) Filename: pool/main/d/discover1/discover1-udeb_1.7.18~bpo.1_hppa.udeb Size: 8110 MD5sum: 73317a95d1d5c5da6eaabe875daaab45 SHA1: 52589cfd06cf6e7d67c91a40534a09f754add8da SHA256: a8f514c9896e0ce19dc1a0e8b679720c0e560fe78f6ac0435b5328475d1adb6f Description: hardware identification system (udeb) Package: e2fsprogs-udeb Priority: optional Section: debian-installer Installed-Size: 472 Maintainer: Theodore Y. Ts'o Architecture: hppa Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Depends: libblkid1-udeb, libc6 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/e2fsprogs-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_hppa.udeb Size: 200046 MD5sum: 57506be4797211a9eca295484f446ee4 SHA1: 720879e7ee6c812e1eebdc63feb6f0b1d6090e4e SHA256: 633aa5d9b71c978973108ac33653a68ae17a3c1ae3dc938e73fa11e2d1ecdcc0 Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: gnupg-udeb Priority: extra Section: debian-installer Installed-Size: 844 Maintainer: James Troup Architecture: hppa Source: gnupg Version: 1.4.6-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libusb-0.1-4 (>= 2:0.1.10a), zlib1g (>= 1:1.2.1) Filename: pool/main/g/gnupg/gnupg-udeb_1.4.6-1~bpo.1_hppa.udeb Size: 417320 MD5sum: c29b4ce85666bc7e05fefec7ade0944e SHA1: 1b60b324b8514b3186745cc3efcfd62b16c9b285 SHA256: 9f812fd8c223e469004ded4bae6870a971eb1f7fd8f34d1641c4143b070d8bd0 Description: GNU privacy guard - a free PGP replacement GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG packaged in minimal form for use in debian-installer. Package: gpgv-udeb Priority: extra Section: debian-installer Installed-Size: 324 Maintainer: James Troup Architecture: hppa Source: gnupg Version: 1.4.6-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), zlib1g (>= 1:1.2.1) Filename: pool/main/g/gnupg/gpgv-udeb_1.4.6-1~bpo.1_hppa.udeb Size: 151588 MD5sum: acfb4ba63d34d9ccbc7d59521606ceef SHA1: f270f5d4f93cd61e0abd5d9d812f5f9981bde474 SHA256: 5e8694f310d4f9b4bc8a70d35630b0632e4584e96d619a04430752a74d125449 Description: minimal signature verification tool GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG's signature verification tool, gpgv, packaged in minimal form for use in debian-installer. Package: libblkid1-udeb Priority: optional Section: debian-installer Installed-Size: 52 Maintainer: Theodore Y. Ts'o Architecture: hppa Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Provides: libblkid1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/libblkid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_hppa.udeb Size: 18328 MD5sum: 80eacb543522057c7cc89951b182f756 SHA1: 58f0dfc599aa5745f45d38eeb24b1f15886f7fca SHA256: d15c8d4e72a51ef0941c27ea1c7f4bc0ee2948a1b4709d739063062a78cd6d08 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libdirectfb-0.9-24-udeb Priority: optional Section: debian-installer Installed-Size: 1144 Maintainer: Guillem Jover Architecture: hppa Source: directfb Version: 0.9.24-3bpo1 Provides: libdirectfb-0.9-24 Depends: libc6 (>= 2.3.2.ds1-21), libdirectfb-0.9-24, libfreetype6 (>= 2.1.5-1), libpng12-0 (>= 1.2.8rel), libsysfs1, zlib1g (>= 1:1.2.1) Filename: pool/main/d/directfb/libdirectfb-0.9-24-udeb_0.9.24-3bpo1_hppa.udeb Size: 488614 MD5sum: 958d3a2731a898b3f6d9b87f3a59cc5f SHA1: 3ad17b01837acf4b6c30c23a7fd6e2a9107e13b4 SHA256: 1c1ce791029e4978f08ba2e22ac65501a4161fb2b38ae08e050e49951a608775 Description: frame buffer graphics library DirectFB is a graphics library which was designed with embedded systems in mind. It offers maximum hardware accelerated performance at a minimum of resource usage and overhead. . This package contains the shared libraries for use with the debian installer. Package: libdiscover1-udeb Priority: extra Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team Architecture: hppa Source: discover1 Version: 1.7.18~bpo.1 Provides: libdiscover1 Depends: libc6 (>= 2.3.2.ds1-21), discover1-data-udeb (>= 1.2004.09.24) Filename: pool/main/d/discover1/libdiscover1-udeb_1.7.18~bpo.1_hppa.udeb Size: 34906 MD5sum: e685adb109d82e7c36c8a4a5a275ecbb SHA1: eb9617238390598a65284d1cb13a407c7f38cb62 SHA256: 69748b333adf38cbba5fbe062f5c0699279e7068673b7254f9421dc05a47736c Description: hardware identification library (udeb) Package: libglib2.0-udeb Priority: extra Section: debian-installer Installed-Size: 3052 Maintainer: Sebastien Bacher Architecture: hppa Source: glib2.0 Version: 2.10.2-0bpo1 Provides: libglib2.0-0 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/g/glib2.0/libglib2.0-udeb_2.10.2-0bpo1_hppa.udeb Size: 611422 MD5sum: d1fbe815cb093a8ecf90108c47a048f5 SHA1: 1cb14cb5c2f2111b5ac1fbe6204d63cca5479135 SHA256: eac3d7ad7c835e5cf3b9b33f9c14a831030350d5d19f9ef92a38cd93fd65f772 Description: The GLib library of C routines This is a udeb, or a microdeb, for the debian-installer. . GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. Package: libiw28-udeb Priority: extra Section: debian-installer Installed-Size: 44 Maintainer: Guus Sliepen Architecture: hppa Source: wireless-tools Version: 28-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/w/wireless-tools/libiw28-udeb_28-1~bpo.1_hppa.udeb Size: 14870 MD5sum: d6569eb3c96b28f14f00f28ffec5406e SHA1: fdff910ef23da37cc37c2e620f05fa2415c6ba7a SHA256: cc16d828582ab9da6ee334e9c12a496007e3d6bdfefaa8cd98edbf855f04c1dd Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: libparted1.7-udeb Priority: extra Section: debian-installer Installed-Size: 508 Maintainer: Parted Maintainer Team Architecture: hppa Source: parted Version: 1.7.1-2.1~bpo.1 Provides: libparted1.7-1 Depends: libc6 (>= 2.3.2.ds1-21), libuuid1 Filename: pool/main/p/parted/libparted1.7-udeb_1.7.1-2.1~bpo.1_hppa.udeb Size: 210502 MD5sum: 1ac5dc8120b88b7f1133170f7cab3f49 SHA1: 798027f225c97e7962be391860fbddbcdd0e5c09 SHA256: 9b9e5e844b3b4cdd81dfbac8913695364c22439c05d02273bd65cd268c81a9e4 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libslang2-udeb Priority: extra Section: debian-installer Installed-Size: 844 Maintainer: Alastair McKinstry Architecture: hppa Source: slang2 Version: 2.0.6-3~bpo.2 Depends: libc-udeb Filename: pool/main/s/slang2/libslang2-udeb_2.0.6-3~bpo.2_hppa.udeb Size: 311474 MD5sum: ad8bbc8c3377db8d77ff3bab4ae6f99b SHA1: 35ef03452fea0b9ad17d30f254b4e69f3c67d5df SHA256: ec03c8ba2ebcb06ea78521c62483e1e0327337867366bdb6897b6679d2aec892 Description: S-Lang library for Debian Installer This is a udeb, or a microdeb, of the S-Lang library with wide charater support. As such it is the installer counterpart of libslang2. You only need this package to support applications needing S-Lang during the Debian installation process time and probably don't need to select it. Package: libsysfs2-udeb Priority: optional Section: debian-installer Installed-Size: 52 Maintainer: Martin Pitt Architecture: hppa Source: sysfsutils Version: 2.0.0-6bpo1 Provides: libsysfs2 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/s/sysfsutils/libsysfs2-udeb_2.0.0-6bpo1_hppa.udeb Size: 15794 MD5sum: 5b59e2a364475afffaed1260eab19521 SHA1: dda8bf13a85211cbe318c8581b61a365f2c4499a SHA256: ebc067c37253d99964165fdb257334c15e6b4ae4c5af295ad22bb66db5890e1e Description: interface library to sysfs Sysfs is a virtual file system in Linux kernel 2.5+ that provides a tree of system devices. libsysfs provides a stable programming interface to sysfs and eases querying system devices and their attributes. . This is a minimal package for use in debian-installer. Package: libuuid1-udeb Priority: optional Section: debian-installer Installed-Size: 28 Maintainer: Theodore Y. Ts'o Architecture: hppa Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Replaces: libuuid1 Provides: libuuid1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/libuuid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_hppa.udeb Size: 8284 MD5sum: bb60cc2efbdcb8d38f6b377e911c551d SHA1: 3b21dc32ba089395c20e6eaac9a41c0954f66eaf SHA256: 4bd64eef7283138ffd63474a47451c7c036b27d1296443865f52583e4db8ac85 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: mdadm-udeb Priority: optional Section: debian-installer Installed-Size: 172 Maintainer: Debian/Ubuntu mdadm maintainers Architecture: hppa Source: mdadm Version: 2.4.1-5bpo1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/m/mdadm/mdadm-udeb_2.4.1-5bpo1_hppa.udeb Size: 74862 MD5sum: a1e3bad2ce59928243eb771e6b70c9fb SHA1: c43ab02b70ba5a5e22c5903969571453c8cd7850 SHA256: 4c071283d21097adb3eb66bad593ecc92c1aeda449e1ee46d493d3567213fd18 Description: tool to administer Linux MD device arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD devices (software RAID), as well as multipath devices. . mdadm-udeb is a minimal package used by the debian-installer. Package: module-init-tools-udeb Priority: extra Section: debian-installer Installed-Size: 124 Maintainer: Marco d'Itri Architecture: hppa Source: module-init-tools Version: 3.3-pre4-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/m/module-init-tools/module-init-tools-udeb_3.3-pre4-1~bpo.1_hppa.udeb Size: 37858 MD5sum: d13b39f85d80b1b7f7a0880e89c9be81 SHA1: 90820ed46378b2b37a6a2a3d3e8deac29a486a3c SHA256: 63ef790afb58f949b5924dbe5bb4d250b6f2208a78350e70ad691f9a48e50092 Description: tools for managing Linux kernel modules This is the debian-installer version of module-init-tools. Package: openssh-client-udeb Priority: optional Section: debian-installer Installed-Size: 420 Maintainer: Matthew Vernon Architecture: hppa Source: openssh Version: 1:4.3p2-5~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb Filename: pool/main/o/openssh/openssh-client-udeb_4.3p2-5~bpo.1_hppa.udeb Size: 189744 MD5sum: b9804b2775ce56b204c16f6f8311b155 SHA1: fcbc97b9ef82d73910a910edac9abb5a3980e6d7 SHA256: 958e12e09ed375878e3c297968b9a86bf3ecce17efc85daa6b059d8528a9b7d8 Description: Secure shell client for the Debian installer This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . This package provides the ssh client for use in debian-installer. installer-menu-item: 999 Package: openssh-server-udeb Priority: optional Section: debian-installer Installed-Size: 448 Maintainer: Matthew Vernon Architecture: hppa Source: openssh Version: 1:4.3p2-5~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb Filename: pool/main/o/openssh/openssh-server-udeb_4.3p2-5~bpo.1_hppa.udeb Size: 196844 MD5sum: e69af7e04983c28aaa29109fbe095ae5 SHA1: 5d443d263cf4f9456074a17934c55357c033c440 SHA256: 01d61322737b92d9387f6af28ab558580ab8b32e6265bdda2f14d493e82b878c Description: Secure shell server for the Debian installer This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . This package provides the sshd server for use in debian-installer. Since it is expected to be used in specialized situations (e.g. S/390 installs with no console), it does not provide any configuration. Package: parted-udeb Priority: extra Section: debian-installer Installed-Size: 80 Maintainer: Parted Maintainer Team Architecture: hppa Source: parted Version: 1.7.1-2.1~bpo.1 Provides: parted Depends: libc6 (>= 2.3.2.ds1-21), libparted1.7-1 (>= 1.7.1-1) Filename: pool/main/p/parted/parted-udeb_1.7.1-2.1~bpo.1_hppa.udeb Size: 30740 MD5sum: eb5b957a9775ff7f9741750ea4f9850c SHA1: ff68c75c547aadc9b495f435737fb356f6e82c7c SHA256: 1277c550da1a28f61bae35cecccc068a2db64497054efa81d0d4c552a5921dd6 Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: pcmciautils-udeb Priority: extra Section: debian-installer Installed-Size: 112 Maintainer: Colin Watson Architecture: hppa Source: pcmciautils Version: 013-0bpo1 Depends: udev-udeb, libc6 (>= 2.3.2.ds1-21), libsysfs2 Filename: pool/main/p/pcmciautils/pcmciautils-udeb_013-0bpo1_hppa.udeb Size: 22838 MD5sum: 603cdede30383bb6d5a087f34b96a890 SHA1: 43afd56e191fc1aa79467f3eb4d612efa0094beb SHA256: 44534cf0ddf74cf01da77060864cf1890ac5fb1953032c91fb14ec6e087f7045 Description: PCMCIA utilities for Linux 2.6 This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or later, replacing the old pcmcia-cs tools used with earlier kernel versions. PCMCIA cards are commonly used in laptops to provide expanded capabilities such as network connections, modems, increased memory, etc. . To use PCMCIA you need to have kernel modules available to support it. These are included in the stock Debian 2.6 kernel packages. . This is a minimal package for use in debian-installer. Package: ppp-udeb Priority: optional Section: debian-installer Installed-Size: 340 Maintainer: Marco d'Itri Architecture: hppa Source: ppp Version: 2.4.4rel-1bpo1 Provides: configured-network Depends: libc6 (>= 2.3.2.ds1-21), ethernet-card-detection, ppp-modules, di-utils Filename: pool/main/p/ppp/ppp-udeb_2.4.4rel-1bpo1_hppa.udeb Size: 125754 MD5sum: 0e09e6a3c85c64bd836a48389aed38f6 SHA1: 82864094a97f4bb627bef7d624d466e429b156f6 SHA256: bdb8178e0788fadfd211363dce4cabca6e2a7f8150f3ff90be430b19f5c287cd Description: Point-to-Point Protocol (PPP) daemon The Point-to-Point Protocol (PPP) provides a standard way to transmit datagrams over a serial link, as well as a standard way for the machines at either end of the link (the "peers") to negotiate various optional characteristics of the link. Using PPP, a serial link can be used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections between the peers. . ppp-udeb is a minimal ppp package used by the debian-installer. installer-menu-item: 18 Package: ttf-dejavu-udeb Priority: optional Section: debian-installer Installed-Size: 636 Maintainer: Peter Cernak Architecture: all Source: ttf-dejavu Version: 2.7-1bpo1 Filename: pool/main/t/ttf-dejavu/ttf-dejavu-udeb_2.7-1bpo1_all.udeb Size: 328828 MD5sum: be72588f30e96dc2cd6bf8e7800fbf30 SHA1: 6ed1f0565711bb3dc127d0abcb42368b07d672e6 SHA256: 9cb6b280cbc3f67af44511f5f45c24272881649e521723a5c015789d0f6336a7 Description: Bitstream Vera fonts with additional characters for D-I use These fonts are based on the famous Bitstream Vera font family adding better support for non-English languages. They currently cover the entire Latin Ext-A range and parts of Latin Ext-B, Cyrillic, Greek and other ranges. . This package provides the fonts for use with the gtk frontend of debian-installer. Package: udev-udeb Priority: optional Section: debian-installer Installed-Size: 448 Maintainer: Marco d'Itri Architecture: hppa Source: udev Version: 0.105-4~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/u/udev/udev-udeb_0.105-4~bpo.1_hppa.udeb Size: 127112 MD5sum: 82be8bb3d361ec7c0f7e142eb9e84e29 SHA1: a3343966dca1ebf7c4638f1d79df0519a0e5f1b6 SHA256: 5da600dde45359a8d318308292eb795d69afc489452c10c4555388c14ee12044 Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. It replaces the hotplug package and requires a kernel not older than 2.6.12. . This is a minimal version for use in debian-installer. Package: wireless-tools-udeb Priority: extra Section: debian-installer Installed-Size: 48 Maintainer: Guus Sliepen Architecture: hppa Source: wireless-tools Version: 28-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libiw28 (>= 28) Filename: pool/main/w/wireless-tools/wireless-tools-udeb_28-1~bpo.1_hppa.udeb Size: 13320 MD5sum: 0e3507bd0c432d7a74e0bef4546d662b SHA1: ee840af737a7e8a61527857312a3e03b87967c74 SHA256: a2109332f9c705aaec217c50ca0da90ed9e31f61efe10619ffbfe426c7315a87 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools.