Package: cdebootstrap-udeb Priority: optional Section: debian-installer Installed-Size: 136 Maintainer: Bastian Blank Architecture: arm Source: cdebootstrap Version: 0.3.10bpo1 Depends: libc6 (>= 2.3.2.ds1-21), libdebconfclient0, libdebian-installer-extra4 (>= 0.29), libdebian-installer4 (>= 0.29) Filename: pool/main/c/cdebootstrap/cdebootstrap-udeb_0.3.10bpo1_arm.udeb Size: 17228 MD5sum: b4f4368464df1c73ae9de5c7b3a52ab5 SHA1: b8d43b2c3c72b7c246421d4749cdf13a294d7535 SHA256: 791f967263902e7d13eb4ae820f021fd9f3e3f1d879b9b47eb01204c30d5683a Description: Bootstrap a Debian system cdebootstrap is used to create a Debian base system from scratch. Package: cryptsetup-udeb Priority: optional Section: debian-installer Installed-Size: 416 Maintainer: Debian Cryptsetup Team Architecture: arm Source: cryptsetup Version: 2:1.0.3-2bpo1 Depends: libc6 (>= 2.3.2.ds1-21), libdevmapper1.01, libpopt0 (>= 1.7), libuuid1, dmsetup-udeb Filename: pool/main/c/cryptsetup/cryptsetup-udeb_1.0.3-2bpo1_arm.udeb Size: 176444 MD5sum: b7a13d8ea1ed9823b6390a3af6a6e912 SHA1: 4496d06f5c6349f4f754096232a79e01d9249fe9 SHA256: 414fb38b1bfb6e941765c8579e3432e8c2030f80508e0bd44143e442011e5dbe Description: configures encrypted block devices Since kernel 2.6.4, encrypted filesystem support is provided by the device mapper target dm-crypt. This utility provides a command-line interface for configuring this facility. It has integrated support for LUKS. . cryptsetup is backwards compatible with the on-disk format of cryptoloop, but also supports more secure formats. This package also includes support for automatically configuring encrypted devices at boot time via the config file /etc/crypttab. When combined with newer versions of the debian initrd-tools and standard debian kernels, cryptoroot is also supported. Package: debian-archive-keyring-udeb Priority: standard Section: debian-installer Installed-Size: 28 Maintainer: Michael Vogt Architecture: all Source: debian-archive-keyring Version: 2006.11.22~bpo.2 Recommends: gpgv-udeb Filename: pool/main/d/debian-archive-keyring/debian-archive-keyring-udeb_2006.11.22~bpo.2_all.udeb Size: 7230 MD5sum: d087231ba12ab805404846e6171405e6 SHA1: b1482dcf9756fb907622a3efd38d5acd69d5ba5b SHA256: 12b81a25174f15bc3616458c2b619afe4298111a4d81aa86993f0acc9c9d86ec Description: GnuPG keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that, in a minimal form for use in the installer. Package: debootstrap-udeb Priority: required Section: debian-installer Installed-Size: 164 Maintainer: Anthony Towns Architecture: arm Source: debootstrap Version: 0.3.3~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), mounted-partitions Filename: pool/main/d/debootstrap/debootstrap-udeb_0.3.3~bpo.1_arm.udeb Size: 38730 MD5sum: e1bf3b0b021ed03efd6ffca92d5f791d SHA1: 2f73ac6573f2dd2fe3f7eb2f1a72ee55509eb217 SHA256: 1f63f7ab39150e7211fb02662c75a685f1726dcd4c4ce2dc0a70e20b2671b603 Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: discover1-data-udeb Priority: extra Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team Architecture: all Source: discover1-data Version: 1.2006.01.14~bpo.1 Filename: pool/main/d/discover1-data/discover1-data-udeb_1.2006.01.14~bpo.1_all.udeb Size: 18012 MD5sum: e1442e407cb71424010f60720fc37f68 SHA1: 2ba73f3304bb245e2075f2dd26b218ff0945bc47 SHA256: d3a7e51e4987d4ca2a210259f33e19ccd5ad53af58535c8a6fc51157ff45fbd0 Description: hardware lists for libdiscover1 (short list) The libdiscover1 library requires this package to look up information about various hardware devices using the identification data that they report. It contains data detailing various PCI, PCMCIA, and USB devices. . There are two separate lists for kernel versions 2.4 and 2.6. Discover automatically chooses the appropriate list for your running kernel. . This is the short list of HW required by d-i during installation. Package: discover1-udeb Priority: extra Section: debian-installer Installed-Size: 28 Maintainer: Debian Install System Team Architecture: arm Source: discover1 Version: 1.7.18~bpo.1 Provides: discover Depends: libc6 (>= 2.3.2.ds1-21), libdiscover1, discover1-data-udeb (>= 1.2004.09.24) Filename: pool/main/d/discover1/discover1-udeb_1.7.18~bpo.1_arm.udeb Size: 6730 MD5sum: 81f4e2b331fe3d8b848f7bc99d1674f9 SHA1: 5d9f3968e1ecab69e790a0c8c040d692bd59e00c SHA256: 9aa2126ab4ac4af41db54fd2b7b18b2abb2a4a38fcc58c4ecae9b608dd210b3d Description: hardware identification system (udeb) Package: e2fsprogs-udeb Priority: optional Section: debian-installer Installed-Size: 396 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Depends: libblkid1-udeb, libc6 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/e2fsprogs-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_arm.udeb Size: 169150 MD5sum: 64aeb02e1f86f68f03c2da551aa0d2e2 SHA1: 558a0fc9b96ab8d1a33ba8fb64a6e8aeeba583e4 SHA256: 65b3d75ca08a91fa304d575cd377fe68578149780cbdb6f989f3e3a86406b3e8 Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: gnupg-udeb Priority: extra Section: debian-installer Installed-Size: 772 Maintainer: James Troup Architecture: arm Source: gnupg Version: 1.4.6-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libusb-0.1-4 (>= 2:0.1.10a), zlib1g (>= 1:1.2.1) Filename: pool/main/g/gnupg/gnupg-udeb_1.4.6-1~bpo.1_arm.udeb Size: 375972 MD5sum: a3949f956de937989b07f442ee52f4ee SHA1: 53e84bc3f358bb8e2f1dda30c6aaf4f6874eadfe SHA256: 88ae856983bfe796921e6146a31ef923b040a0c81482a910cc5f01822d1d670b Description: GNU privacy guard - a free PGP replacement GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG packaged in minimal form for use in debian-installer. Package: gpgv-udeb Priority: extra Section: debian-installer Installed-Size: 288 Maintainer: James Troup Architecture: arm Source: gnupg Version: 1.4.6-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), zlib1g (>= 1:1.2.1) Filename: pool/main/g/gnupg/gpgv-udeb_1.4.6-1~bpo.1_arm.udeb Size: 134106 MD5sum: 00f63e4401a937504f695b51e94f038a SHA1: cbfa5d098bf5f3ae76d7790c452d116d4fb62c52 SHA256: 2a446d25766d1bbed75ba5a0f27169d49fc320f3cab32441f874f95daf5b628e Description: minimal signature verification tool GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG's signature verification tool, gpgv, packaged in minimal form for use in debian-installer. Package: libblkid1-udeb Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Provides: libblkid1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/libblkid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_arm.udeb Size: 14258 MD5sum: 3ace11895fa54a444ba871bec03e3274 SHA1: a24ec12bc1387ba33d4740b5bcd4833b595fa2c0 SHA256: d3898deb950fb2404fe0a63a5bc810beddad5fee909d005da361fff1a0e4f1f8 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libdirectfb-0.9-24-udeb Priority: optional Section: debian-installer Installed-Size: 916 Maintainer: Guillem Jover Architecture: arm Source: directfb Version: 0.9.24-3bpo1 Provides: libdirectfb-0.9-24 Depends: libc6 (>= 2.3.2.ds1-21), libdirectfb-0.9-24, libfreetype6 (>= 2.1.5-1), libpng12-0 (>= 1.2.8rel), libsysfs2, zlib1g (>= 1:1.2.1) Filename: pool/main/d/directfb/libdirectfb-0.9-24-udeb_0.9.24-3bpo1_arm.udeb Size: 367904 MD5sum: 8326b3377f76690aba6fc63b7591461f SHA1: 87ad62ee82916c443d388e4acf1c77c97fa717fd SHA256: 54743b8b138ed8b2463ad97749331fbc9f02d77fbbda9d0622e2e8e75514fc16 Description: frame buffer graphics library DirectFB is a graphics library which was designed with embedded systems in mind. It offers maximum hardware accelerated performance at a minimum of resource usage and overhead. . This package contains the shared libraries for use with the debian installer. Package: libdiscover1-udeb Priority: extra Section: debian-installer Installed-Size: 80 Maintainer: Debian Install System Team Architecture: arm Source: discover1 Version: 1.7.18~bpo.1 Provides: libdiscover1 Depends: libc6 (>= 2.3.2.ds1-21), discover1-data-udeb (>= 1.2004.09.24) Filename: pool/main/d/discover1/libdiscover1-udeb_1.7.18~bpo.1_arm.udeb Size: 28474 MD5sum: 2a1816e6fd1e7ec645048aebbd60fbb0 SHA1: 7dc434460984c63a070a912a40e7fc72f0c5c3e9 SHA256: 318c38790fa4936994e4c088f081ab1e371ec29c2aee62913d08b972586c9c83 Description: hardware identification library (udeb) Package: libglib2.0-udeb Priority: extra Section: debian-installer Installed-Size: 2860 Maintainer: Sebastien Bacher Architecture: arm Source: glib2.0 Version: 2.10.2-0bpo1 Provides: libglib2.0-0 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/g/glib2.0/libglib2.0-udeb_2.10.2-0bpo1_arm.udeb Size: 541820 MD5sum: e3132448bbab3af00060e0e1f3c1c773 SHA1: c27a06105fd8e3f8805836839dce8731c76270b5 SHA256: cb596527618300d691e2a92d271ade77e936032d4acdb909b00f2f401d9c0c1e Description: The GLib library of C routines This is a udeb, or a microdeb, for the debian-installer. . GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. Package: libiw28-udeb Priority: extra Section: debian-installer Installed-Size: 36 Maintainer: Guus Sliepen Architecture: arm Source: wireless-tools Version: 28-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/w/wireless-tools/libiw28-udeb_28-1~bpo.1_arm.udeb Size: 12416 MD5sum: 19f0c70f40258e91ee93ee9b754a1c6b SHA1: 2e61ae1c5de9e6302999608b3c7cb12f0f7f4459 SHA256: 171d52d02064bbf2d4eefea297f6b80cab0409969d3ad3af87323ca592918c59 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: libparted1.7-udeb Priority: extra Section: debian-installer Installed-Size: 392 Maintainer: Parted Maintainer Team Architecture: arm Source: parted Version: 1.7.1-2.1~bpo.1 Provides: libparted1.7-1 Depends: libc6 (>= 2.3.2.ds1-21), libuuid1 Filename: pool/main/p/parted/libparted1.7-udeb_1.7.1-2.1~bpo.1_arm.udeb Size: 176080 MD5sum: 87e9adcf0cdc93d833804fecbf271286 SHA1: 0528cfd4d730a27067da0b16ebde92d564d27e7c SHA256: 73db293e85f0abcb106e0481c762118cf87904dda2b31558716d02ffebac928c Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libslang2-udeb Priority: extra Section: debian-installer Installed-Size: 640 Maintainer: Alastair McKinstry Architecture: arm Source: slang2 Version: 2.0.6-3~bpo.2 Depends: libc-udeb Filename: pool/main/s/slang2/libslang2-udeb_2.0.6-3~bpo.2_arm.udeb Size: 236762 MD5sum: deedbe3fa49a4405296cfbaf22437e33 SHA1: b23983d62f563bebd8d90fc6dfe292ddb5966a6a SHA256: 4c7658ddfeec4aef6fa9fa7b94d3f7b771ecff0b392e28972cd5780dfa861224 Description: S-Lang library for Debian Installer This is a udeb, or a microdeb, of the S-Lang library with wide charater support. As such it is the installer counterpart of libslang2. You only need this package to support applications needing S-Lang during the Debian installation process time and probably don't need to select it. Package: libsysfs2-udeb Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Martin Pitt Architecture: arm Source: sysfsutils Version: 2.0.0-6bpo1 Provides: libsysfs2 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/s/sysfsutils/libsysfs2-udeb_2.0.0-6bpo1_arm.udeb Size: 12696 MD5sum: 9ea8e4ae492fdff70029a75238520ba4 SHA1: d0ad1f365f28f5e09fc39c564e5b98a04d91357b SHA256: 2622634b81eead94b137874e2b0e746ad7e7ab2c5b75ecf67b13d4687ecb364d Description: interface library to sysfs Sysfs is a virtual file system in Linux kernel 2.5+ that provides a tree of system devices. libsysfs provides a stable programming interface to sysfs and eases querying system devices and their attributes. . This is a minimal package for use in debian-installer. Package: libuuid1-udeb Priority: optional Section: debian-installer Installed-Size: 24 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Replaces: libuuid1 Provides: libuuid1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/libuuid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_arm.udeb Size: 6894 MD5sum: bd9e25345e072e17cd7d554e50ea3ca0 SHA1: 2bb4dcc7b95d7dda5726b62b94b0ed9ba3ad1f2a SHA256: c9a8f23a9c0b55c3a420595584721672e2d9e99828d93b685ba6cc7b99d2e296 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: mdadm-udeb Priority: optional Section: debian-installer Installed-Size: 156 Maintainer: Debian/Ubuntu mdadm maintainers Architecture: arm Source: mdadm Version: 2.4.1-5bpo1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/m/mdadm/mdadm-udeb_2.4.1-5bpo1_arm.udeb Size: 64836 MD5sum: ee18c0ee7904e6eb6b3da74f5e066df4 SHA1: 0875eea7ff247e8d45d9e0c9a1afdd4996b7d548 SHA256: 7248a948a2739bf4d86dd2fee3ca3bede73031279e3ba23c8044c22b6d1bd380 Description: tool to administer Linux MD device arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD devices (software RAID), as well as multipath devices. . mdadm-udeb is a minimal package used by the debian-installer. Package: module-init-tools-udeb Priority: extra Section: debian-installer Installed-Size: 108 Maintainer: Marco d'Itri Architecture: arm Source: module-init-tools Version: 3.3-pre4-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/m/module-init-tools/module-init-tools-udeb_3.3-pre4-1~bpo.1_arm.udeb Size: 31522 MD5sum: 0b62a376a87ef0f6fb83a64ab7eaea70 SHA1: 0b292b3fb71fa4382eea7107131783782824f721 SHA256: ec2734efcf38801ca67fcf423136f331a3db2331dde3fed723fe64cc3bae0637 Description: tools for managing Linux kernel modules This is the debian-installer version of module-init-tools. Package: openssh-client-udeb Priority: optional Section: debian-installer Installed-Size: 368 Maintainer: Matthew Vernon Architecture: arm Source: openssh Version: 1:4.3p2-5~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb Filename: pool/main/o/openssh/openssh-client-udeb_4.3p2-5~bpo.1_arm.udeb Size: 167184 MD5sum: 01ee1732c39bc55f92e4bd8283a51096 SHA1: e698c471a0d5d18893414f794a145b222e91cbdd SHA256: e549c0720eb24531468e076237fd598649a7ac216e8e8971bc42bddd72e5ae09 Description: Secure shell client for the Debian installer This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . This package provides the ssh client for use in debian-installer. installer-menu-item: 999 Package: openssh-server-udeb Priority: optional Section: debian-installer Installed-Size: 388 Maintainer: Matthew Vernon Architecture: arm Source: openssh Version: 1:4.3p2-5~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb Filename: pool/main/o/openssh/openssh-server-udeb_4.3p2-5~bpo.1_arm.udeb Size: 171810 MD5sum: efeeed4dfc2e76ce0582457530aa78d1 SHA1: 91b20e5a57afaabbab713d7c37757a2c79cc600e SHA256: eb1339c451a9033b26ca890c66ce1a1ffcdc874b9e4ea10e30980a4f20d3d479 Description: Secure shell server for the Debian installer This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . This package provides the sshd server for use in debian-installer. Since it is expected to be used in specialized situations (e.g. S/390 installs with no console), it does not provide any configuration. Package: parted-udeb Priority: extra Section: debian-installer Installed-Size: 72 Maintainer: Parted Maintainer Team Architecture: arm Source: parted Version: 1.7.1-2.1~bpo.1 Provides: parted Depends: libc6 (>= 2.3.2.ds1-21), libparted1.7-1 (>= 1.7.1-1) Filename: pool/main/p/parted/parted-udeb_1.7.1-2.1~bpo.1_arm.udeb Size: 26560 MD5sum: 3c511025cbb1e6c72b59312395c8a66a SHA1: 970641fa79f55e63325846f60a561fc47e48bf06 SHA256: 830c890eb3aa0adda322764060e02e6bb47b15789c3c57c5fa1a89bd4686192b Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: pcmciautils-udeb Priority: extra Section: debian-installer Installed-Size: 100 Maintainer: Colin Watson Architecture: arm Source: pcmciautils Version: 013-0bpo1 Depends: udev-udeb, libc6 (>= 2.3.2.ds1-21), libsysfs2 Filename: pool/main/p/pcmciautils/pcmciautils-udeb_013-0bpo1_arm.udeb Size: 20680 MD5sum: 2c66b22ec03860c3939bd1c26947fcbc SHA1: d510ba94ab5456623120a9f9379119dd0a749fd1 SHA256: a63392e340e4e1b1caa41e21689c1909d5c00c21080c307d098385a93f6d8dd9 Description: PCMCIA utilities for Linux 2.6 This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or later, replacing the old pcmcia-cs tools used with earlier kernel versions. PCMCIA cards are commonly used in laptops to provide expanded capabilities such as network connections, modems, increased memory, etc. . To use PCMCIA you need to have kernel modules available to support it. These are included in the stock Debian 2.6 kernel packages. . This is a minimal package for use in debian-installer. Package: ppp-udeb Priority: optional Section: debian-installer Installed-Size: 308 Maintainer: Marco d'Itri Architecture: arm Source: ppp Version: 2.4.4rel-1bpo1 Provides: configured-network Depends: libc6 (>= 2.3.2.ds1-21), ethernet-card-detection, ppp-modules, di-utils Filename: pool/main/p/ppp/ppp-udeb_2.4.4rel-1bpo1_arm.udeb Size: 113452 MD5sum: 86c2fe33d877ee0f758e0d573472068a SHA1: 7a4caea5472cd4f02fd6c7511eb2ee83aa175c54 SHA256: 00007695348320dca2f833a7f4239135f4e073047f0000bc4c9cb73b960f4f3c Description: Point-to-Point Protocol (PPP) daemon The Point-to-Point Protocol (PPP) provides a standard way to transmit datagrams over a serial link, as well as a standard way for the machines at either end of the link (the "peers") to negotiate various optional characteristics of the link. Using PPP, a serial link can be used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections between the peers. . ppp-udeb is a minimal ppp package used by the debian-installer. installer-menu-item: 18 Package: ttf-dejavu-udeb Priority: optional Section: debian-installer Installed-Size: 636 Maintainer: Peter Cernak Architecture: all Source: ttf-dejavu Version: 2.7-1bpo1 Filename: pool/main/t/ttf-dejavu/ttf-dejavu-udeb_2.7-1bpo1_all.udeb Size: 328828 MD5sum: be72588f30e96dc2cd6bf8e7800fbf30 SHA1: 6ed1f0565711bb3dc127d0abcb42368b07d672e6 SHA256: 9cb6b280cbc3f67af44511f5f45c24272881649e521723a5c015789d0f6336a7 Description: Bitstream Vera fonts with additional characters for D-I use These fonts are based on the famous Bitstream Vera font family adding better support for non-English languages. They currently cover the entire Latin Ext-A range and parts of Latin Ext-B, Cyrillic, Greek and other ranges. . This package provides the fonts for use with the gtk frontend of debian-installer. Package: udev-udeb Priority: optional Section: debian-installer Installed-Size: 408 Maintainer: Marco d'Itri Architecture: arm Source: udev Version: 0.105-4~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21) Filename: pool/main/u/udev/udev-udeb_0.105-4~bpo.1_arm.udeb Size: 109878 MD5sum: dce774701e09ee1f390f7babb3336560 SHA1: 086e4913abfafef58086814dafaeaacf79b7c129 SHA256: eceeec010f9e6d26c442975f0c81ef37ca513f6b79c085dfb48bb80cdb181d6a Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. It replaces the hotplug package and requires a kernel not older than 2.6.12. . This is a minimal version for use in debian-installer. Package: wireless-tools-udeb Priority: extra Section: debian-installer Installed-Size: 40 Maintainer: Guus Sliepen Architecture: arm Source: wireless-tools Version: 28-1~bpo.1 Depends: libc6 (>= 2.3.2.ds1-21), libiw28 (>= 28) Filename: pool/main/w/wireless-tools/wireless-tools-udeb_28-1~bpo.1_arm.udeb Size: 12368 MD5sum: 1af8e01f9c23eb52f624e423ae6595de SHA1: c3924750cfe519b00a1936dd918edede9bfea690 SHA256: dfc84b7ea26563c7315bc840901add83d43b37f67be083b6519fe60af5ce1576 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools.