Package: cdebootstrap-udeb Priority: optional Section: debian-installer Installed-Size: 152 Maintainer: Bastian Blank Architecture: alpha Source: cdebootstrap Version: 0.3.10bpo1 Depends: libc6.1 (>= 2.3.2.ds1-21), libdebconfclient0, libdebian-installer-extra4 (>= 0.29), libdebian-installer4 (>= 0.29) Filename: pool/main/c/cdebootstrap/cdebootstrap-udeb_0.3.10bpo1_alpha.udeb Size: 23258 MD5sum: 60390f78be436f3fd00090ebbe3b51ae SHA1: e8194cec01f28e2f1d786d0d033763f00153024a SHA256: cea74b8629eb3868abef366aeb59f3a200cded919cc7d8eb859a6c217665802b Description: Bootstrap a Debian system cdebootstrap is used to create a Debian base system from scratch. Package: cryptsetup-udeb Priority: optional Section: debian-installer Installed-Size: 548 Maintainer: Debian Cryptsetup Team Architecture: alpha Source: cryptsetup Version: 2:1.0.3-2bpo1 Depends: libc6.1 (>= 2.3.2.ds1-21), libdevmapper1.01, libpopt0 (>= 1.7), libuuid1, dmsetup-udeb Filename: pool/main/c/cryptsetup/cryptsetup-udeb_1.0.3-2bpo1_alpha.udeb Size: 231460 MD5sum: dd83f71583f20f4b53410c9e76fb50ac SHA1: ed081b56a9fec0701c4d2afacae29331e205451b SHA256: abbdddfd0574386bc2ba330c995dfde2760bf4ea31a8f0f3f407785927b33ee8 Description: configures encrypted block devices Since kernel 2.6.4, encrypted filesystem support is provided by the device mapper target dm-crypt. This utility provides a command-line interface for configuring this facility. It has integrated support for LUKS. . cryptsetup is backwards compatible with the on-disk format of cryptoloop, but also supports more secure formats. This package also includes support for automatically configuring encrypted devices at boot time via the config file /etc/crypttab. When combined with newer versions of the debian initrd-tools and standard debian kernels, cryptoroot is also supported. Package: debian-archive-keyring-udeb Priority: standard Section: debian-installer Installed-Size: 28 Maintainer: Michael Vogt Architecture: all Source: debian-archive-keyring Version: 2006.11.22~bpo.2 Recommends: gpgv-udeb Filename: pool/main/d/debian-archive-keyring/debian-archive-keyring-udeb_2006.11.22~bpo.2_all.udeb Size: 7230 MD5sum: d087231ba12ab805404846e6171405e6 SHA1: b1482dcf9756fb907622a3efd38d5acd69d5ba5b SHA256: 12b81a25174f15bc3616458c2b619afe4298111a4d81aa86993f0acc9c9d86ec Description: GnuPG keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that, in a minimal form for use in the installer. Package: debootstrap-udeb Priority: required Section: debian-installer Installed-Size: 180 Maintainer: Anthony Towns Architecture: alpha Source: debootstrap Version: 0.3.3~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21), mounted-partitions Filename: pool/main/d/debootstrap/debootstrap-udeb_0.3.3~bpo.1_alpha.udeb Size: 44100 MD5sum: df784d68a279a1e5663193b3a7500031 SHA1: 28378c20f5e6a5e612108ffb0f94381d3e04b671 SHA256: 0937224e32002ed2d79ef1b123199c3f9e62e6059a666f93510f35304145a153 Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: discover1-data-udeb Priority: extra Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team Architecture: all Source: discover1-data Version: 1.2006.01.14~bpo.1 Filename: pool/main/d/discover1-data/discover1-data-udeb_1.2006.01.14~bpo.1_all.udeb Size: 18012 MD5sum: e1442e407cb71424010f60720fc37f68 SHA1: 2ba73f3304bb245e2075f2dd26b218ff0945bc47 SHA256: d3a7e51e4987d4ca2a210259f33e19ccd5ad53af58535c8a6fc51157ff45fbd0 Description: hardware lists for libdiscover1 (short list) The libdiscover1 library requires this package to look up information about various hardware devices using the identification data that they report. It contains data detailing various PCI, PCMCIA, and USB devices. . There are two separate lists for kernel versions 2.4 and 2.6. Discover automatically chooses the appropriate list for your running kernel. . This is the short list of HW required by d-i during installation. Package: discover1-udeb Priority: extra Section: debian-installer Installed-Size: 36 Maintainer: Debian Install System Team Architecture: alpha Source: discover1 Version: 1.7.18~bpo.1 Provides: discover Depends: libc6.1 (>= 2.3.2.ds1-21), libdiscover1, discover1-data-udeb (>= 1.2004.09.24) Filename: pool/main/d/discover1/discover1-udeb_1.7.18~bpo.1_alpha.udeb Size: 8132 MD5sum: a2f376d7e20a2afd181d17f4d56ee2bd SHA1: f127aefd54b7647a4de3bc4f4e4b7b2c4009e170 SHA256: c574c0c2c8cfc7fa31886dec4617cd62ee7ac1e5ac7c9cf3136601180e67744c Description: hardware identification system (udeb) Package: e2fsprogs-udeb Priority: optional Section: debian-installer Installed-Size: 560 Maintainer: Theodore Y. Ts'o Architecture: alpha Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Depends: libblkid1-udeb, libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/e2fsprogs-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_alpha.udeb Size: 210450 MD5sum: 9013a7adedef20bd07bbf1a2a388fbf4 SHA1: 1e20fcab59b2c8d26e96cc6668f98df300da7bf9 SHA256: f9d5b6484ffab3016efd4473eb9aae61aa6bc055fccdad016a420f508f4464f4 Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: gnupg-udeb Priority: extra Section: debian-installer Installed-Size: 1100 Maintainer: James Troup Architecture: alpha Source: gnupg Version: 1.4.6-1~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21), libusb-0.1-4 (>= 2:0.1.10a), zlib1g (>= 1:1.2.1) Filename: pool/main/g/gnupg/gnupg-udeb_1.4.6-1~bpo.1_alpha.udeb Size: 492056 MD5sum: 18b862670a04d8b60b251072384c67f3 SHA1: 669deb3f03ab7a4b292039b1de15c3184e0d766e SHA256: 62a078e52822979bafb6dc39861403c6bec7c8788dfd728c537f8767cf86fd40 Description: GNU privacy guard - a free PGP replacement GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG packaged in minimal form for use in debian-installer. Package: gpgv-udeb Priority: extra Section: debian-installer Installed-Size: 424 Maintainer: James Troup Architecture: alpha Source: gnupg Version: 1.4.6-1~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21), zlib1g (>= 1:1.2.1) Filename: pool/main/g/gnupg/gpgv-udeb_1.4.6-1~bpo.1_alpha.udeb Size: 182560 MD5sum: c466555f583a34802dded9272db71a5a SHA1: 74c04bfe71c30f782f9b206b072eeefc6671b3be SHA256: e814fa510ad86681380acce7f1db3de05dc21fd6f0fdfd6f280c83ddf5091df1 Description: minimal signature verification tool GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG's signature verification tool, gpgv, packaged in minimal form for use in debian-installer. Package: libblkid1-udeb Priority: optional Section: debian-installer Installed-Size: 64 Maintainer: Theodore Y. Ts'o Architecture: alpha Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Provides: libblkid1 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/libblkid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_alpha.udeb Size: 18400 MD5sum: c243d72aed2fa3a5893463be208b9fb9 SHA1: 6b95ea03b40b1e747e254798303e866b12998265 SHA256: 6a78a88d48052d6ba34274bc1538370ddd219e09d9eef2a3cc236facf9a1c8a7 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libdirectfb-0.9-24-udeb Priority: optional Section: debian-installer Installed-Size: 1320 Maintainer: Guillem Jover Architecture: alpha Source: directfb Version: 0.9.24-3bpo1 Provides: libdirectfb-0.9-24 Depends: libc6.1 (>= 2.3.2.ds1-21), libdirectfb-0.9-24, libfreetype6 (>= 2.1.5-1), libpng12-0 (>= 1.2.8rel), libsysfs1, zlib1g (>= 1:1.2.1) Filename: pool/main/d/directfb/libdirectfb-0.9-24-udeb_0.9.24-3bpo1_alpha.udeb Size: 535236 MD5sum: 7e025a15ec8b90a2a04b1101a1507e69 SHA1: cdfd74858ca6244386054216bebb4840f4fa0822 SHA256: 2a1b0c480456c97241b7114127193e90b514db933f5bd707be8cf4043651ba1c Description: frame buffer graphics library DirectFB is a graphics library which was designed with embedded systems in mind. It offers maximum hardware accelerated performance at a minimum of resource usage and overhead. . This package contains the shared libraries for use with the debian installer. Package: libdiscover1-udeb Priority: extra Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team Architecture: alpha Source: discover1 Version: 1.7.18~bpo.1 Provides: libdiscover1 Depends: libc6.1 (>= 2.3.2.ds1-21), discover1-data-udeb (>= 1.2004.09.24) Filename: pool/main/d/discover1/libdiscover1-udeb_1.7.18~bpo.1_alpha.udeb Size: 32634 MD5sum: 4508e04b882cbab8950cff6816a5eda2 SHA1: 2b21dc4725d426dffe9596a65a5679e9888b4548 SHA256: e598779300006c21b36a247bff47cbb9e2252983e08115a67b41c28e3c9195dd Description: hardware identification library (udeb) Package: libglib2.0-udeb Priority: extra Section: debian-installer Installed-Size: 3108 Maintainer: Sebastien Bacher Architecture: alpha Source: glib2.0 Version: 2.10.2-0bpo1 Provides: libglib2.0-0 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/g/glib2.0/libglib2.0-udeb_2.10.2-0bpo1_alpha.udeb Size: 611684 MD5sum: c2e9454a206ced33d167492e9b301502 SHA1: 67763cb465cec5da07059cc2e09d63643450737f SHA256: fcbf8cd1a5f9c122598c590460ec22dd78bc63f655c9aefb7193eed29d0d9f4a Description: The GLib library of C routines This is a udeb, or a microdeb, for the debian-installer. . GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. Package: libiw28-udeb Priority: extra Section: debian-installer Installed-Size: 52 Maintainer: Guus Sliepen Architecture: alpha Source: wireless-tools Version: 28-1~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/w/wireless-tools/libiw28-udeb_28-1~bpo.1_alpha.udeb Size: 16790 MD5sum: 0780bed1a4be6a2c682163fb6ebbd504 SHA1: d686f76030ab8b5f3b9f04ea7f38c24a1b131b06 SHA256: 456b0fd26c13bb3de60f2e2261911fad05dff1fd4184511f9bd3ff122982f0b9 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: libparted1.7-udeb Priority: extra Section: debian-installer Installed-Size: 496 Maintainer: Parted Maintainer Team Architecture: alpha Source: parted Version: 1.7.1-2.1~bpo.1 Provides: libparted1.7-1 Depends: libc6.1 (>= 2.3.2.ds1-21), libuuid1 Filename: pool/main/p/parted/libparted1.7-udeb_1.7.1-2.1~bpo.1_alpha.udeb Size: 197828 MD5sum: f0ba340ba27a9b0b5e3ac9f2ac1d4174 SHA1: 7ca77c10edeaa2a7a3d4844e310679936cc9111b SHA256: ce121ac132ccc455cdc173104ec247f9988e257a6fe9229b59426e48c955de59 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libslang2-udeb Priority: extra Section: debian-installer Installed-Size: 1076 Maintainer: Alastair McKinstry Architecture: alpha Source: slang2 Version: 2.0.6-3~bpo.2 Depends: libc-udeb Filename: pool/main/s/slang2/libslang2-udeb_2.0.6-3~bpo.2_alpha.udeb Size: 314288 MD5sum: 11ff857a4c813ab1df503cc85c24f6b7 SHA1: aedfd0b948159d111b83ad1bc7ab5668b126fdfc SHA256: f18fe553a1eb7c0312eb532066bfe816b6a5f74ece180e92414176289c3671e8 Description: S-Lang library for Debian Installer This is a udeb, or a microdeb, of the S-Lang library with wide charater support. As such it is the installer counterpart of libslang2. You only need this package to support applications needing S-Lang during the Debian installation process time and probably don't need to select it. Package: libsysfs2-udeb Priority: optional Section: debian-installer Installed-Size: 68 Maintainer: Martin Pitt Architecture: alpha Source: sysfsutils Version: 2.0.0-6bpo1 Provides: libsysfs2 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/s/sysfsutils/libsysfs2-udeb_2.0.0-6bpo1_alpha.udeb Size: 17266 MD5sum: 847c54b34eeb3fc867d882803e9d2106 SHA1: c38a7878e43a69185ed739a5445288736fadb41f SHA256: 2a407da593f1b1916fa5238fd1ddeeee9a2c8ca8151f80dbf93f9006b74da0d5 Description: interface library to sysfs Sysfs is a virtual file system in Linux kernel 2.5+ that provides a tree of system devices. libsysfs provides a stable programming interface to sysfs and eases querying system devices and their attributes. . This is a minimal package for use in debian-installer. Package: libuuid1-udeb Priority: optional Section: debian-installer Installed-Size: 28 Maintainer: Theodore Y. Ts'o Architecture: alpha Source: e2fsprogs Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1 Replaces: libuuid1 Provides: libuuid1 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/e/e2fsprogs/libuuid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_alpha.udeb Size: 7120 MD5sum: 377fdcf74197afd10293378f5dd1867e SHA1: 761ee0eace655df81d3df4266cab8393d6b734e6 SHA256: 4ecb769c2bfcea499d16047bc946a9a14a0383c956ff427e86f9506fbc72bb0e Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: mdadm-udeb Priority: optional Section: debian-installer Installed-Size: 180 Maintainer: Debian/Ubuntu mdadm maintainers Architecture: alpha Source: mdadm Version: 2.4.1-5bpo1 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/m/mdadm/mdadm-udeb_2.4.1-5bpo1_alpha.udeb Size: 69982 MD5sum: d93cf5020678095c5b1094b9796254b1 SHA1: 01ff41f12de2c3b000e6c93e335c2775583b32de SHA256: c7bff4325e445f697746fad04a5d9f81e8f7edae5e4190ec52c1afa690dbee99 Description: tool to administer Linux MD device arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD devices (software RAID), as well as multipath devices. . mdadm-udeb is a minimal package used by the debian-installer. Package: module-init-tools-udeb Priority: extra Section: debian-installer Installed-Size: 160 Maintainer: Marco d'Itri Architecture: alpha Source: module-init-tools Version: 3.3-pre4-1~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/m/module-init-tools/module-init-tools-udeb_3.3-pre4-1~bpo.1_alpha.udeb Size: 41132 MD5sum: 4803d2e5396e2ccb246c46b413253deb SHA1: 8fd3e0431ec11608dfbacb88e6e4d2075dd9dcb6 SHA256: a714211191d6b1ef2eb283635fa595433f73aeb9dd91bc0825d28dc1608f130c Description: tools for managing Linux kernel modules This is the debian-installer version of module-init-tools. Package: openssh-client-udeb Priority: optional Section: debian-installer Installed-Size: 536 Maintainer: Matthew Vernon Architecture: alpha Source: openssh Version: 1:4.3p2-5~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb Filename: pool/main/o/openssh/openssh-client-udeb_4.3p2-5~bpo.1_alpha.udeb Size: 223230 MD5sum: 124d403f409cdecf25bc92fdcb67d186 SHA1: 421438f9ddd68e8337bd078c1bff110c74e4805d SHA256: ed7fc9f36a939171b54e6e4c4529407c1813f6f16c1f2ba15340fd656da4c956 Description: Secure shell client for the Debian installer This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . This package provides the ssh client for use in debian-installer. installer-menu-item: 999 Package: openssh-server-udeb Priority: optional Section: debian-installer Installed-Size: 580 Maintainer: Matthew Vernon Architecture: alpha Source: openssh Version: 1:4.3p2-5~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb Filename: pool/main/o/openssh/openssh-server-udeb_4.3p2-5~bpo.1_alpha.udeb Size: 239418 MD5sum: 9967d8db46ade8e36c1aeb9ca1ea500f SHA1: 227a7a96b509ee4e38e942b5a8e18f735efea982 SHA256: 5797303f46749cdfa2347db17ff3acde676551ef201d434f09472c01a41e39dd Description: Secure shell server for the Debian installer This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . This package provides the sshd server for use in debian-installer. Since it is expected to be used in specialized situations (e.g. S/390 installs with no console), it does not provide any configuration. Package: parted-udeb Priority: extra Section: debian-installer Installed-Size: 100 Maintainer: Parted Maintainer Team Architecture: alpha Source: parted Version: 1.7.1-2.1~bpo.1 Provides: parted Depends: libc6.1 (>= 2.3.2.ds1-21), libparted1.7-1 (>= 1.7.1-1) Filename: pool/main/p/parted/parted-udeb_1.7.1-2.1~bpo.1_alpha.udeb Size: 32330 MD5sum: 59b621b0c1a120330dfe42e0b46d467e SHA1: 0af0426b9bc4f9b7ad5c075cddfca792e35aecb3 SHA256: 9f321acf4974c4241e3f5a0242cfd2fd4ac3e746b26c5f2f32319ac6c1631ff1 Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: pcmciautils-udeb Priority: extra Section: debian-installer Installed-Size: 128 Maintainer: Colin Watson Architecture: alpha Source: pcmciautils Version: 013-0bpo1 Depends: udev-udeb, libc6.1 (>= 2.3.2.ds1-21), libsysfs2 Filename: pool/main/p/pcmciautils/pcmciautils-udeb_013-0bpo1_alpha.udeb Size: 26188 MD5sum: e69474efba19c5180e68261fda4c96f0 SHA1: b641e8d0ce188741cfce96a71bc1f652c76fb23c SHA256: 7a220d7cb4c0fd78dc4793764b4b589cc34646afd98633a5c438864b36a46fd6 Description: PCMCIA utilities for Linux 2.6 This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or later, replacing the old pcmcia-cs tools used with earlier kernel versions. PCMCIA cards are commonly used in laptops to provide expanded capabilities such as network connections, modems, increased memory, etc. . To use PCMCIA you need to have kernel modules available to support it. These are included in the stock Debian 2.6 kernel packages. . This is a minimal package for use in debian-installer. Package: ppp-udeb Priority: optional Section: debian-installer Installed-Size: 420 Maintainer: Marco d'Itri Architecture: alpha Source: ppp Version: 2.4.4rel-1bpo1 Provides: configured-network Depends: libc6.1 (>= 2.3.2.ds1-21), ethernet-card-detection, ppp-modules, di-utils Filename: pool/main/p/ppp/ppp-udeb_2.4.4rel-1bpo1_alpha.udeb Size: 153192 MD5sum: 4fc7c75f0b48879322f6c8a0cd7aec67 SHA1: ca3f9b70263aab19eef8375b26a1811dc73aff7b SHA256: aca1962f9e7abc12b622b1aa1d9e69b8e2b4ade81f0f5d3b6a9239f1bc635ce6 Description: Point-to-Point Protocol (PPP) daemon The Point-to-Point Protocol (PPP) provides a standard way to transmit datagrams over a serial link, as well as a standard way for the machines at either end of the link (the "peers") to negotiate various optional characteristics of the link. Using PPP, a serial link can be used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections between the peers. . ppp-udeb is a minimal ppp package used by the debian-installer. installer-menu-item: 18 Package: ttf-dejavu-udeb Priority: optional Section: debian-installer Installed-Size: 636 Maintainer: Peter Cernak Architecture: all Source: ttf-dejavu Version: 2.7-1bpo1 Filename: pool/main/t/ttf-dejavu/ttf-dejavu-udeb_2.7-1bpo1_all.udeb Size: 328828 MD5sum: be72588f30e96dc2cd6bf8e7800fbf30 SHA1: 6ed1f0565711bb3dc127d0abcb42368b07d672e6 SHA256: 9cb6b280cbc3f67af44511f5f45c24272881649e521723a5c015789d0f6336a7 Description: Bitstream Vera fonts with additional characters for D-I use These fonts are based on the famous Bitstream Vera font family adding better support for non-English languages. They currently cover the entire Latin Ext-A range and parts of Latin Ext-B, Cyrillic, Greek and other ranges. . This package provides the fonts for use with the gtk frontend of debian-installer. Package: udev-udeb Priority: optional Section: debian-installer Installed-Size: 544 Maintainer: Marco d'Itri Architecture: alpha Source: udev Version: 0.105-4~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21) Filename: pool/main/u/udev/udev-udeb_0.105-4~bpo.1_alpha.udeb Size: 149968 MD5sum: 92b5d839bf27b0c84fbfc7884f7a620a SHA1: e284adff8f05737a40dbb717ea20689bc16b4fab SHA256: 4926e3c1cf054ac88d6e0667d3d08a182059faee0155aef567650abc4cb3a162 Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. It replaces the hotplug package and requires a kernel not older than 2.6.12. . This is a minimal version for use in debian-installer. Package: wireless-tools-udeb Priority: extra Section: debian-installer Installed-Size: 52 Maintainer: Guus Sliepen Architecture: alpha Source: wireless-tools Version: 28-1~bpo.1 Depends: libc6.1 (>= 2.3.2.ds1-21), libiw28 (>= 28) Filename: pool/main/w/wireless-tools/wireless-tools-udeb_28-1~bpo.1_alpha.udeb Size: 14402 MD5sum: 019d31bcd9666aa94bd78c4a6191151c SHA1: 4be1c761e9eba7de9617b71b19b519c5e60bdcce SHA256: 871c74aeffb20b81fb683e799f7e09e5b801755de486ead7cd0a2941611cc2b2 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools.